Re: sb live (emu10k1) stops working between 2.6.23.1 and 2.6.23.7

[Nick Warne]

> I've done some more testing this morning, and it appears that the "ALSA:
> emu10k1 - Fix memory corruption" patch from 2.6.23.6 has broken digital
> output on my SB Live Value card.  Simply replacing the 2.6.23.7 emumixer.c
> with the version included in 2.6.23.1 I was able to get digital output
> working again under 2.6.23.7.

Hi Jim,

Just to prove you are not alone, I also get the exactly the same issue:

lspci:
00:0f.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)

log:

Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58 
2007 UTC).
PCI: Found IRQ 5 for device 0000:00:0f.0
ALSA device list: #0: SBLive 5.1 [SB0060] (rev.7, serial:0x80611102) at 
0xe000, irq 5

I use a restore file at boot, so run /sbin/alsactl restore

And updating this morning to 2.6.23.8 produces:

/usr/sbin/alsactl: set_control:991: warning: name mismatch (IEC958 Playback 
Mask/IEC958 Playback Default) for control #228
/usr/sbin/alsactl: set_control:993: warning: index mismatch (3/0) for control 
#228
/usr/sbin/alsactl: set_control:993: warning: index mismatch (0/1) for control 
#229
/usr/sbin/alsactl: set_control:993: warning: index mismatch (1/2) for control 
#230
/usr/sbin/alsactl: set_control:985: warning: iface mismatch (3/2) for control 
#231
/usr/sbin/alsactl: set_control:987: warning: device mismatch (2/0) for control 
#231
/usr/sbin/alsactl: set_control:989: warning: subdevice mismatch (0/0) for 
control #231
/usr/sbin/alsactl: set_control:991: warning: name mismatch (IEC958 Playback 
Default/SB Live Analog/Digital Output Jack) for control #231

Nick




> On Fri, 16 Nov 2007, Jim Faulkner wrote:

>
> Hello,
>
> I have an SB Live Value card which uses the emu10k1 driver.  I use digital
> output to an external amplifier.  This has worked fine for many years, up
> to and including kernel 2.6.23.1.  Under 2.6.23.7, I have been unable
> to get any audio output.  I get the following errors when loading my
> asound.state under 2.6.23.7 using `alsactl restore`:
> alsactl: set_control:991: warning: name mismatch (IEC958 Playback
> Mask/IEC958 Playback Default) for control #222
> alsactl: set_control:993: warning: index mismatch (3/0) for control #222
> alsactl: set_control:993: warning: index mismatch (0/1) for control #223
> alsactl: set_control:993: warning: index mismatch (1/2) for control #224
> alsactl: set_control:985: warning: iface mismatch (3/2) for control #225
> alsactl: set_control:987: warning: device mismatch (2/0) for control #225
> alsactl: set_control:989: warning: subdevice mismatch (0/0) for control
> #225
> alsactl: set_control:991: warning: name mismatch (IEC958 Playback
> Default/SB Live Analog/Digital Output Jack) for control #225
> alsactl: set_control:993: warning: index mismatch (2/0) for control #225
> alsactl: set_control:995: failed to obtain info for control #225
> (Operation not permitted)
>
> I receive no errors when I load my asound.state under 2.6.23.1.
-- 
Free Software Foundation Associate Member 5508
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/