Re: [RFT] Port 0x80 I/O speed

[Dave Young]

On Dec 12, 2007 7:31 AM, Rene Herman <rene.herman@xxxxxxxxx> wrote:
> Good day.
>
> Would some people on x86 (both 32 and 64) be kind enough to compile and run
> the attached program? This is about testing how long I/O port access to port
> 0x80 takes. It measures in CPU cycles so CPU speed is crucial in reporting.
>
> Posted a previous incarnation of this before, buried in the outb 0x80 thread
> which had a serialising problem. This one should as far as I can see measure
> the right thing though. Please yell if you disagree...
>
> For me, on a Duron 1300 (AMD756 chipset) I have a constant:
>
> rene@7ixe4:~/src/port80$ su -c ./port80
> cycles: out 2400, in 2400
>
> and on a PII 400 (Intel 440BX chipset) a constant:
>
> rene@6bap:~/src/port80$ su -c ./port80
> cycles: out 553, in 251
>
> Results are (mostly) independent of compiler optimisation, but testing with
> an -O2 compile should be most useful. Thanks!
>
> Rene.
>
> /* gcc -W -Wall -O2 -o port80 port80.c */
>
> #include <stdlib.h>
> #include <stdio.h>
>
> #include <sys/io.h>
>
> #define LOOPS 10000
>
> inline unsigned long long rdtsc(void)
> {
>         unsigned long long tsc;
>
>         asm volatile ("rdtsc": "=A" (tsc));
>
>         return tsc;
> }
>
> inline void serialize(void)
> {
>         asm volatile ("cpuid": : : "eax", "ebx", "ecx", "edx");
> }
>
> int main(void)
> {
>         unsigned long long start;
>         unsigned long long overhead;
>         unsigned long long output;
>         unsigned long long input;
>         int i;
>
>         if (iopl(3) < 0) {
>                 perror("iopl");
>                 return EXIT_FAILURE;
>         }
>
>         asm volatile ("cli");
>         start = rdtsc();
>         for (i = 0; i < LOOPS; i++) {
>                 serialize();
>                 serialize();
>         }
>         overhead = rdtsc() - start;
>
>         start = rdtsc() + overhead;
>         for (i = 0; i < LOOPS; i++) {
>                 serialize();
>                 asm volatile ("outb %al, $0x80");
>                 serialize();
>         }
>         output = rdtsc() - start;
>
>         start = rdtsc() + overhead;
>         for (i = 0; i < LOOPS; i++) {
>                 serialize();
>                 asm volatile ("inb $0x80, %%al": : : "al");
>                 serialize();
>         }
>         input = rdtsc() - start;
>         asm volatile ("sti");
>
>         output /= LOOPS;
>         input  /= LOOPS;
>         printf("cycles: out %llu, in %llu\n", output, input);
>
>         return EXIT_SUCCESS;
> }
>
>

dave@darkstar:~/work/tmp$ sudo ./port80
cycles: out 2522, in 1788
dave@darkstar:~/work/tmp$ sudo ./port80
cycles: out 2522, in 1795
dave@darkstar:~/work/tmp$ sudo ./port80
cycles: out 2523, in 1788
dave@darkstar:~/work/tmp$ sudo ./port80
cycles: out 2516, in 1788
dave@darkstar:~/work/tmp$ sudo ./port80
cycles: out 2516, in 1798
dave@darkstar:~/work/tmp$ sudo ./port80
cycles: out 2523, in 1788
dave@darkstar:~/work/tmp$ sudo ./port80
cycles: out 2518, in 1788
dave@darkstar:~/work/tmp$ sudo ./port80
cycles: out 2517, in 1788
dave@darkstar:~/work/tmp$ sudo ./port80
cycles: out 2523, in 1788
dave@darkstar:~/work/tmp$ sudo ./port80
cycles: out 2517, in 1788

dave@darkstar:~$ cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 15
model           : 4
model name      : Intel(R) Pentium(R) D CPU 2.80GHz
stepping        : 7
cpu MHz         : 2793.194
cache size      : 1024 KB
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/