Re: [PATCH] x86: provide a DMI based port 0x80 I/O delay override

[Juergen Beisert]

On Sunday 30 December 2007 16:38, Alan Cox wrote:
> > do you have any memories about the outb_p() use of misc_32.c:
> >
> >         pos = (x + cols * y) * 2;       /* Update cursor position */
> >         outb_p(14, vidport);
> >         outb_p(0xff & (pos >> 9), vidport+1);
> >         outb_p(15, vidport);
> >         outb_p(0xff & (pos >> 1), vidport+1);
> >
> > was this ever needed? This is so early in the bootup that can we cannot
>
> None - but we don't care.

Was this embedded outb to 0x80 for delay only? Maybe I'm wrong. But in the 
case above it forces the chipselect signal to deselect the hardware between 
the access to vidport and vidport+1. Some devices need this to latch the 
values correctly. Otherwise the chipselect signal would be active for all 
four accesses in the example above (and only data and addresses are changing 
from device's view).

Juergen
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/