Re: [PATCH 9/10] introduce intel_menlow platform specific driver

From: Li Zefan
Date: Thu Jan 17 2008 - 22:55:43 EST


Zhang Rui åé:
> Hi, Randy and Sam,
>
>>> + if (result)
>>> + goto end;acpi_bus_get_private_data
>>> + }
>>> +
>>> + end:
> Hah, Lindent always does this for me,
>> Labels should begin in column 0 or 1. Only.
> yes, and checkpatch.pl begins to complain about this
> after using Lindent...
> I think we should change one of them, :)
>
>>> + return result;
>>> +}
>>> +
>>> +
>>> +const static struct acpi_device_id intel_menlow_memory_ids[] = {
>>> + {"INT0002", 0},
>>> + {"", 0},
>> or just {} for the terminating entry, right?
> Yes, I use this just to be consistent with other ACPI device drivers.
>
> Thanks for your comments, please review the patch below,
>
> From: Thomas Sujith <sujith.thomas@xxxxxxxxx>
>
> Intel menlow platform specific driver for thermal management extension.
>
> Signed-off-by: Thomas Sujith <sujith.thomas@xxxxxxxxx>
> Signed-off-by: Zhang Rui <rui.zhang@xxxxxxxxx>
> ---
> drivers/misc/Kconfig | 9
> drivers/misc/Makefile | 1
> drivers/misc/intel_menlow.c | 520 ++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 530 insertions(+)
>
> Index: linux-2.6/drivers/misc/intel_menlow.c
> ===================================================================
> --- /dev/null
> +++ linux-2.6/drivers/misc/intel_menlow.c
> @@ -0,0 +1,520 @@
> +/*
> +* intel_menlow.c - Intel menlow Driver for thermal management extension
> +*
> +* Copyright (C) 2008 Intel Corp
> +* Copyright (C) 2008 Sujith Thomas <sujith.thomas@xxxxxxxxx>
> +* Copyright (C) 2008 Zhang Rui <rui.zhang@xxxxxxxxx>
> +* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +*
> +* This program is free software; you can redistribute it and/or modify
> +* it under the terms of the GNU General Public License as published by
> +* the Free Software Foundation; version 2 of the License.
> +*
> +* This program is distributed in the hope that it will be useful, but
> +* WITHOUT ANY WARRANTY; without even the implied warranty of
> +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> +* General Public License for more details.
> +*
> +* You should have received a copy of the GNU General Public License along
> +* with this program; if not, write to the Free Software Foundation, Inc.,
> +* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
> +*
> +* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +*
> +* This driver creates the sys I/F for programming the sensors.
> +* It also implements the driver for intel menlow memory controller (hardware
> +* id is INT0002) which makes use of the platform specific ACPI methods
> +* to get/set bandwidth.
> +*/
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/types.h>
> +#include <linux/pci.h>
> +#include <linux/pm.h>
> +
> +#include <linux/thermal.h>
> +#include <acpi/acpi_bus.h>
> +#include <acpi/acpi_drivers.h>
> +
> +MODULE_AUTHOR("Thomas Sujith");
> +MODULE_AUTHOR("Zhang Rui");
> +MODULE_DESCRIPTION("Intel Menlow platform specific driver");
> +MODULE_LICENSE("GPL");
> +
> +/*
> + * Memory controller device control
> + */
> +
> +#define MEMORY_GET_BANDWIDTH "GTHS"
> +#define MEMORY_SET_BANDWIDTH "STHS"
> +#define MEMORY_ARG_CUR_BANDWIDTH 1
> +#define MEMORY_ARG_MAX_BANDWIDTH 0
> +
> +static int memory_get_int_max_bandwidth(struct thermal_cooling_device *cdev,
> + unsigned long *max_state)
> +{
> + struct acpi_device *device = cdev->devdata;
> + acpi_handle handle = device->handle;
> + unsigned long value;
> + struct acpi_object_list arg_list;
> + union acpi_object arg;
> + acpi_status status = AE_OK;
> +
> + arg_list.count = 1;
> + arg_list.pointer = &arg;
> + arg.type = ACPI_TYPE_INTEGER;
> + arg.integer.value = MEMORY_ARG_MAX_BANDWIDTH;
> + status = acpi_evaluate_integer(handle, MEMORY_GET_BANDWIDTH,
> + &arg_list, &value);
> + if (ACPI_FAILURE(status))
> + return -EFAULT;
> +
> + *max_state = value - 1;
> + return 0;
> +}
> +
> +static int memory_get_max_bandwidth(struct thermal_cooling_device *cdev,
> + char *buf)
> +{
> + unsigned long value;
> + if (memory_get_int_max_bandwidth(cdev, &value))
> + return -EINVAL;
> +
> + return sprintf(buf, "%ld\n", value);
> +}
> +

<...>

> +static int memory_get_cur_bandwidth(struct thermal_cooling_device *cdev,
> + char *buf)
> +{
> + struct acpi_device *device = cdev->devdata;
> + acpi_handle handle = device->handle;
> + unsigned long value;
> + struct acpi_object_list arg_list;
> + union acpi_object arg;
> + acpi_status status = AE_OK;
> +
> + arg_list.count = 1;
> + arg_list.pointer = &arg;
> + arg.type = ACPI_TYPE_INTEGER;
> + arg.integer.value = MEMORY_ARG_CUR_BANDWIDTH;
> + status = acpi_evaluate_integer(handle, MEMORY_GET_BANDWIDTH,
> + &arg_list, &value);
> + if (ACPI_FAILURE(status))
> + return -EFAULT;
> +
> + return sprintf(buf, "%ld\n", value);
> +}
> +
> +static int memory_set_cur_bandwidth(struct thermal_cooling_device *cdev,
> + unsigned int state)
> +{
> + struct acpi_device *device = cdev->devdata;
> + acpi_handle handle = device->handle;
> + struct acpi_object_list arg_list;
> + union acpi_object arg;
> + acpi_status status;
> + int temp;
> + unsigned long max_state;
> +
> + if (memory_get_int_max_bandwidth(cdev, &max_state))
> + return -EFAULT;
> +
> + if (max_state < 0 || state > max_state)
> + return -EINVAL;
> +
> + arg_list.count = 1;
> + arg_list.pointer = &arg;
> + arg.type = ACPI_TYPE_INTEGER;
> + arg.integer.value = state;
> +
> + status =
> + acpi_evaluate_integer(handle, MEMORY_SET_BANDWIDTH, &arg_list,
> + (unsigned long *)&temp);
> +
> + printk(KERN_INFO
> + "Bandwidth value was %d: status is %d\n", state, status);
> + if (ACPI_FAILURE(status))
> + return -EFAULT;
> +
> + return 0;
> +}
> +
> +static struct thermal_cooling_device_ops memory_cooling_ops = {
> + .get_max_state = memory_get_max_bandwidth,
> + .get_cur_state = memory_get_cur_bandwidth,
> + .set_cur_state = memory_set_cur_bandwidth,
> +};
> +

<...>

> +/*
> + * Memory Device Management
> + */
> +static int intel_menlow_memory_add(struct acpi_device *device)
> +{
> + int result = -ENODEV;
> + acpi_status status = AE_OK;
> + acpi_handle dummy;
> + struct thermal_cooling_device *cdev;
> +
> + if (!device)
> + return -EINVAL;
> +
> + status = acpi_get_handle(device->handle, MEMORY_GET_BANDWIDTH, &dummy);
> + if (ACPI_FAILURE(status))
> + goto end;
> +
> + status = acpi_get_handle(device->handle, MEMORY_SET_BANDWIDTH, &dummy);
> + if (ACPI_FAILURE(status))
> + goto end;
> +
> + cdev = thermal_cooling_device_register("Memory controller", device,
> + &memory_cooling_ops);
> + acpi_driver_data(device) = cdev;
> + if (!cdev)
> + result = -ENODEV;
> + else {
> + result =
> + sysfs_create_link(&device->dev.kobj, &cdev->device.kobj,
> + "thermal_cooling");
> + if (result)
> + goto end;
> + result =
> + sysfs_create_link(&cdev->device.kobj, &device->dev.kobj,
> + "device");
> + if (result)
> + goto end;

This if condition is needless.

> + }
> +
> + end:
> + return result;

No need to call thermal_cooling_device_unregister() and sysfs_remove_link() in
some error routines ?

> +}
> +
> +static int intel_menlow_memory_remove(struct acpi_device *device, int type)
> +{
> + struct thermal_cooling_device *cdev = acpi_driver_data(device);
> +
> + if (!device || !cdev)
> + return -EINVAL;
> +
> + sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
> + sysfs_remove_link(&cdev->device.kobj, "device");
> + thermal_cooling_device_unregister(cdev);
> +
> + return 0;
> +}
> +
> +const static struct acpi_device_id intel_menlow_memory_ids[] = {
> + {"INT0002", 0},
> + {"", 0},
> +};
> +
> +static struct acpi_driver intel_menlow_memory_driver = {
> + .name = "intel_menlow_thermal_control",
> + .ids = intel_menlow_memory_ids,
> + .ops = {
> + .add = intel_menlow_memory_add,
> + .remove = intel_menlow_memory_remove,
> + },
> +};
> +
> +/*
> + * Sensor control on menlow platform
> + */
> +
> +#define THERMAL_AUX0 0
> +#define THERMAL_AUX1 1
> +#define GET_AUX0 "GAX0"
> +#define GET_AUX1 "GAX1"
> +#define SET_AUX0 "SAX0"
> +#define SET_AUX1 "SAX1"
> +
> +struct intel_menlow_attribute {
> + struct device_attribute attr;
> + struct device *device;
> + acpi_handle handle;
> + struct list_head node;
> +};
> +
> +static LIST_HEAD(intel_menlow_attr_list);
> +static DEFINE_MUTEX(intel_menlow_attr_lock);
> +
> +/*
> + * sensor_get_auxtrip - get the current auxtrip value from sensor
> + * @name: Thermalzone name
> + * @auxtype : AUX0/AUX1
> + * @buf: syfs buffer
> + */
> +static int sensor_get_auxtrip(acpi_handle handle, int index, int *value)
> +{
> + acpi_status status;
> +
> + if ((index != 0 && index != 1) || !value)
> + return -EINVAL;
> +
> + status = acpi_evaluate_integer(handle, index ? GET_AUX1 : GET_AUX0,
> + NULL, (unsigned long *)value);
> + if (ACPI_FAILURE(status))
> + return -EIO;
> +
> + return 0;
> +}
> +

<...>

> +/*
> + * sensor_set_auxtrip - set the new auxtrip value to sensor
> + * @name: Thermalzone name
> + * @auxtype : AUX0/AUX1
> + * @buf: syfs buffer
> + */
> +static int sensor_set_auxtrip(acpi_handle handle, int index, int value)
> +{
> + acpi_status status;
> + union acpi_object arg = {
> + ACPI_TYPE_INTEGER
> + };
> + struct acpi_object_list args = {
> + 1, &arg
> + };
> + int temp;
> +
> + if (index != 0 && index != 1)
> + return -EINVAL;
> +
> + status = acpi_evaluate_integer(handle, index ? GET_AUX0 : GET_AUX1,
> + NULL, (unsigned long *)&temp);
> + if (ACPI_FAILURE(status))
> + return -EIO;
> + if ((index && value < temp) || (!index && value > temp))
> + return -EINVAL;
> +
> + arg.integer.value = value;
> + status = acpi_evaluate_integer(handle, index ? SET_AUX1 : SET_AUX0,
> + &args, (unsigned long *)&temp);
> + if (ACPI_FAILURE(status))
> + return -EIO;
> +
> + /* do we need to check the return value of SAX0/SAX1 ? */
> +
> + return 0;
> +}
> +
> +#define to_intel_menlow_attr(_attr) \
> + container_of(_attr, struct intel_menlow_attribute, attr)
> +
> +static ssize_t aux0_show(struct device *dev,
> + struct device_attribute *dev_attr, char *buf)
> +{
> + struct intel_menlow_attribute *attr = to_intel_menlow_attr(dev_attr);
> + int value;
> + int result;
> +
> + result = sensor_get_auxtrip(attr->handle, 0, &value);
> +
> + return result ? result : sprintf(buf, "%lu", KELVIN_TO_CELSIUS(value));
> +}
> +
> +static ssize_t aux1_show(struct device *dev,
> + struct device_attribute *dev_attr, char *buf)
> +{
> + struct intel_menlow_attribute *attr = to_intel_menlow_attr(dev_attr);
> + int value;
> + int result;
> +
> + result = sensor_get_auxtrip(attr->handle, 1, &value);
> +
> + return result ? result : sprintf(buf, "%lu", KELVIN_TO_CELSIUS(value));
> +}
> +
> +static ssize_t aux0_store(struct device *dev,
> + struct device_attribute *dev_attr,
> + const char *buf, size_t count)
> +{
> + struct intel_menlow_attribute *attr = to_intel_menlow_attr(dev_attr);
> + int value;
> + int result;
> +
> + /*Sanity check; should be a positive integer */
> + if (!sscanf(buf, "%d", &value))
> + return -EINVAL;
> +
> + if (value < 0)
> + return -EINVAL;
> +
> + result = sensor_set_auxtrip(attr->handle, 0, CELSIUS_TO_KELVIN(value));
> + return result ? result : count;
> +}
> +

<...>

> +static ssize_t aux1_store(struct device *dev,
> + struct device_attribute *dev_attr,
> + const char *buf, size_t count)
> +{
> + struct intel_menlow_attribute *attr = to_intel_menlow_attr(dev_attr);
> + int value;
> + int result;
> +
> + /*Sanity check; should be a positive integer */
> + if (!sscanf(buf, "%d", &value))
> + return -EINVAL;
> +
> + if (value < 0)
> + return -EINVAL;
> +
> + result = sensor_set_auxtrip(attr->handle, 1, CELSIUS_TO_KELVIN(value));
> + return result ? result : count;
> +}
> +
> +/* BIOS can enable/disable the thermal user application in dabney platform */
> +#define BIOS_ENABLED "\\_TZ.GSTS"
> +static ssize_t bios_enabled_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + acpi_status status;
> + unsigned long bios_enabled;
> +
> + status = acpi_evaluate_integer(NULL, BIOS_ENABLED, NULL, &bios_enabled);
> + if (ACPI_FAILURE(status))
> + return -ENODEV;
> +
> + return sprintf(buf, "%s\n", bios_enabled ? "enabled" : "disabled");
> +}
> +
> +static int intel_menlow_add_one_attribute(char *name, int mode, void *show,
> + void *store, struct device *dev,
> + acpi_handle handle)
> +{
> + struct intel_menlow_attribute *attr;
> + int result;
> +
> + attr = kzalloc(sizeof(struct intel_menlow_attribute), GFP_KERNEL);
> + if (!attr)
> + return -ENOMEM;
> +
> + attr->attr.attr.name = name;
> + attr->attr.attr.mode = mode;
> + attr->attr.show = show;
> + attr->attr.store = store;
> + attr->device = dev;
> + attr->handle = handle;
> +
> + result = device_create_file(dev, &attr->attr);
> + if (result)
> + return result;
> +
> + mutex_lock(&intel_menlow_attr_lock);
> + list_add_tail(&attr->node, &intel_menlow_attr_list);
> + mutex_unlock(&intel_menlow_attr_lock);
> +
> + return 0;
> +}
> +

<...>

> +static acpi_status intel_menlow_register_sensor(acpi_handle handle, u32 lvl,
> + void *context, void **rv)
> +{
> + acpi_status status;
> + acpi_handle dummy;
> + struct thermal_zone_device *thermal;
> + int result;
> +
> + result = acpi_bus_get_private_data(handle, (void **)&thermal);
> + if (result)
> + return 0;
> +
> + /* _TZ must have the AUX0/1 methods */
> + status = acpi_get_handle(handle, GET_AUX0, &dummy);
> + if (ACPI_FAILURE(status))
> + goto not_found;
> +
> + status = acpi_get_handle(handle, SET_AUX0, &dummy);
> + if (ACPI_FAILURE(status))
> + goto not_found;
> +
> + result = intel_menlow_add_one_attribute("aux0", 0644,
> + aux0_show, aux0_store,
> + &thermal->device, handle);
> + if (result)
> + return AE_ERROR;
> +
> + status = acpi_get_handle(handle, GET_AUX1, &dummy);
> + if (ACPI_FAILURE(status))
> + goto not_found;
> +
> + status = acpi_get_handle(handle, SET_AUX1, &dummy);
> + if (ACPI_FAILURE(status))
> + goto not_found;
> +
> + result = intel_menlow_add_one_attribute("aux1", 0644,
> + aux1_show, aux1_store,
> + &thermal->device, handle);
> + if (result)
> + return AE_ERROR;
> +
> + /*
> + * create the "dabney_enabled" attribute which means the user app
> + * should be loaded or not
> + */
> +
> + result = intel_menlow_add_one_attribute("bios_enabled", 0444,
> + bios_enabled_show, NULL,
> + &thermal->device, handle);
> + if (result)
> + return AE_ERROR;
> +
> + not_found:
> + if (status == AE_NOT_FOUND)
> + return AE_OK;
> + else
> + return status;
> +}
> +
> +static void intel_menlow_unregister_sensor(void)
> +{
> + struct intel_menlow_attribute *pos, *next;
> +
> + mutex_lock(&intel_menlow_attr_lock);
> + list_for_each_entry_safe(pos, next, &intel_menlow_attr_list, node) {
> + list_del(&pos->node);
> + device_remove_file(pos->device, &pos->attr);
> + kfree(pos);
> + }
> + mutex_unlock(&intel_menlow_attr_lock);
> +
> + return;
> +}
> +
> +static int __init intel_menlow_module_init(void)
> +{
> + int result = -ENODEV;
> + acpi_status status;
> + unsigned long enable;
> +
> + if (acpi_disabled)
> + return result;
> +
> + /* Looking for the \_TZ.GSTS method */
> + status = acpi_evaluate_integer(NULL, BIOS_ENABLED, NULL, &enable);
> + if (ACPI_FAILURE(status) || !enable)
> + return -ENODEV;
> +
> + /* Looking for ACPI device MEM0 with hardware id INT0002 */
> + result = acpi_bus_register_driver(&intel_menlow_memory_driver);
> + if (result)
> + return result;
> +
> + /* Looking for sensors in each ACPI thermal zone */
> + status = acpi_walk_namespace(ACPI_TYPE_THERMAL, ACPI_ROOT_OBJECT,
> + ACPI_UINT32_MAX,
> + intel_menlow_register_sensor, NULL, NULL);
> + if (ACPI_FAILURE(status))
> + result = -ENODEV;
> +

It seems to me this should be 'return -ENODEV;'

You can just eliminate variable result, because result will be
-ENODEV only.

> + return 0;
> +}
> +
> +static void __exit intel_menlow_module_exit(void)
> +{
> + acpi_bus_unregister_driver(&intel_menlow_memory_driver);
> + intel_menlow_unregister_sensor();
> +}
> +
> +module_init(intel_menlow_module_init);
> +module_exit(intel_menlow_module_exit);
> Index: linux-2.6/drivers/misc/Kconfig
> ===================================================================
> --- linux-2.6.orig/drivers/misc/Kconfig
> +++ linux-2.6/drivers/misc/Kconfig
> @@ -232,4 +232,13 @@ config ATMEL_SSC
>
> If unsure, say N.
>
> +config INTEL_MENLOW
> + tristate "Thermal Management driver for Intel menlow platform"
> + depends on ACPI_THERMAL
> + ---help---
> + ACPI thermal management enhancement driver on
> + Intel Menlow platform.
> +
> + If unsure, say N.
> +
> endif # MISC_DEVICES
> Index: linux-2.6/drivers/misc/Makefile
> ===================================================================
> --- linux-2.6.orig/drivers/misc/Makefile
> +++ linux-2.6/drivers/misc/Makefile
> @@ -17,3 +17,4 @@ obj-$(CONFIG_SONY_LAPTOP) += sony-laptop
> obj-$(CONFIG_THINKPAD_ACPI) += thinkpad_acpi.o
> obj-$(CONFIG_FUJITSU_LAPTOP) += fujitsu-laptop.o
> obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o
> +obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o
>
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/