[PATCH 5/6] atmel_serial: Split the interrupt handler
From: Haavard Skinnemoen
Date: Tue Jan 22 2008 - 09:52:17 EST
From: Remy Bohmer <linux@xxxxxxxxxx>
This patch splits up the interrupt handler of the serial port
into a interrupt top-half and a tasklet.
The goal is to get the interrupt top-half as short as possible to
minimize latencies on interrupts. But the old code also does some
calls in the interrupt handler that are not allowed on preempt-RT
in IRQF_NODELAY context. This handler is executed in this context
because of the interrupt sharing with the timer interrupt.
The timer interrupt on Preempt-RT runs in IRQF_NODELAY context.
The tasklet takes care of handling control status changes, pushing
incoming characters to the tty layer, handling break and other errors.
It also handles pushing TX data into the data register.
Reading the complete receive queue is still done in the top-half
because we never want to miss any incoming character.
[hskinnemoen@xxxxxxxxx: misc cleanups and simplifications]
Signed-off-by: Remy Bohmer <linux@xxxxxxxxxx>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@xxxxxxxxx>
---
drivers/serial/atmel_serial.c | 245 +++++++++++++++++++++++++++++++---------
1 files changed, 190 insertions(+), 55 deletions(-)
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index f44316f..60de528 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -108,6 +108,13 @@
static int (*atmel_open_hook)(struct uart_port *);
static void (*atmel_close_hook)(struct uart_port *);
+struct atmel_uart_char {
+ u16 status;
+ u16 ch;
+};
+
+#define ATMEL_SERIAL_RINGSIZE 1024
+
/*
* We wrap our port structure around the generic uart_port.
*/
@@ -116,6 +123,12 @@ struct atmel_uart_port {
struct clk *clk; /* uart clock */
unsigned short suspended; /* is port suspended? */
int break_active; /* break being received */
+
+ struct tasklet_struct tasklet;
+ unsigned int irq_status;
+ unsigned int irq_status_prev;
+
+ struct circ_buf rx_ring;
};
static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
@@ -245,22 +258,42 @@ static void atmel_break_ctl(struct uart_port *port, int break_state)
}
/*
+ * Stores the incoming character in the ring buffer
+ */
+static void
+atmel_buffer_rx_char(struct uart_port *port, unsigned int status,
+ unsigned int ch)
+{
+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *)port;
+ struct circ_buf *ring = &atmel_port->rx_ring;
+ struct atmel_uart_char *c;
+
+ if (!CIRC_SPACE(ring->head, ring->tail, ATMEL_SERIAL_RINGSIZE))
+ /* Buffer overflow, ignore char */
+ return;
+
+ c = &((struct atmel_uart_char *)ring->buf)[ring->head];
+ c->status = status;
+ c->ch = ch;
+
+ /* Make sure the character is stored before we update head. */
+ smp_wmb();
+
+ ring->head = (ring->head + 1) & (ATMEL_SERIAL_RINGSIZE - 1);
+}
+
+/*
* Characters received (called from interrupt handler)
*/
static void atmel_rx_chars(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = (struct atmel_uart_port *)port;
- struct tty_struct *tty = port->info->tty;
- unsigned int status, ch, flg;
+ unsigned int status, ch;
status = UART_GET_CSR(port);
while (status & ATMEL_US_RXRDY) {
ch = UART_GET_CHAR(port);
- port->icount.rx++;
-
- flg = TTY_NORMAL;
-
/*
* note that the error handling code is
* out of the main execution path
@@ -268,17 +301,14 @@ static void atmel_rx_chars(struct uart_port *port)
if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
| ATMEL_US_OVRE | ATMEL_US_RXBRK)
|| atmel_port->break_active)) {
+
/* clear error */
UART_PUT_CR(port, ATMEL_US_RSTSTA);
+
if (status & ATMEL_US_RXBRK
&& !atmel_port->break_active) {
- /* ignore side-effect */
- status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);
- port->icount.brk++;
atmel_port->break_active = 1;
UART_PUT_IER(port, ATMEL_US_RXBRK);
- if (uart_handle_break(port))
- goto ignore_char;
} else {
/*
* This is either the end-of-break
@@ -291,52 +321,30 @@ static void atmel_rx_chars(struct uart_port *port)
status &= ~ATMEL_US_RXBRK;
atmel_port->break_active = 0;
}
- if (status & ATMEL_US_PARE)
- port->icount.parity++;
- if (status & ATMEL_US_FRAME)
- port->icount.frame++;
- if (status & ATMEL_US_OVRE)
- port->icount.overrun++;
-
- status &= port->read_status_mask;
-
- if (status & ATMEL_US_RXBRK)
- flg = TTY_BREAK;
- else if (status & ATMEL_US_PARE)
- flg = TTY_PARITY;
- else if (status & ATMEL_US_FRAME)
- flg = TTY_FRAME;
}
- if (uart_handle_sysrq_char(port, ch))
- goto ignore_char;
-
- uart_insert_char(port, status, ATMEL_US_OVRE, ch, flg);
-
-ignore_char:
+ atmel_buffer_rx_char(port, status, ch);
status = UART_GET_CSR(port);
}
- tty_flip_buffer_push(tty);
+ tasklet_schedule(&atmel_port->tasklet);
}
/*
- * Transmit characters (called from interrupt handler)
+ * Transmit characters (called from tasklet with TXRDY interrupt
+ * disabled)
*/
static void atmel_tx_chars(struct uart_port *port)
{
struct circ_buf *xmit = &port->info->xmit;
- if (port->x_char) {
+ if (port->x_char && UART_GET_CSR(port) & ATMEL_US_TXRDY) {
UART_PUT_CHAR(port, port->x_char);
port->icount.tx++;
port->x_char = 0;
- return;
}
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- atmel_stop_tx(port);
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port))
return;
- }
while (UART_GET_CSR(port) & ATMEL_US_TXRDY) {
UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
@@ -349,8 +357,8 @@ static void atmel_tx_chars(struct uart_port *port)
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
- if (uart_circ_empty(xmit))
- atmel_stop_tx(port);
+ if (!uart_circ_empty(xmit))
+ UART_PUT_IER(port, ATMEL_US_TXRDY);
}
/*
@@ -376,14 +384,18 @@ atmel_handle_receive(struct uart_port *port, unsigned int pending)
}
/*
- * transmit interrupt handler.
+ * transmit interrupt handler. (Transmit is IRQF_NODELAY safe)
*/
static void
atmel_handle_transmit(struct uart_port *port, unsigned int pending)
{
+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *)port;
+
/* Interrupt transmit */
- if (pending & ATMEL_US_TXRDY)
- atmel_tx_chars(port);
+ if (pending & ATMEL_US_TXRDY) {
+ UART_PUT_IDR(port, ATMEL_US_TXRDY);
+ tasklet_schedule(&atmel_port->tasklet);
+ }
}
/*
@@ -393,18 +405,13 @@ static void
atmel_handle_status(struct uart_port *port, unsigned int pending,
unsigned int status)
{
- /* TODO: All reads to CSR will clear these interrupts! */
- if (pending & ATMEL_US_RIIC)
- port->icount.rng++;
- if (pending & ATMEL_US_DSRIC)
- port->icount.dsr++;
- if (pending & ATMEL_US_DCDIC)
- uart_handle_dcd_change(port, !(status & ATMEL_US_DCD));
- if (pending & ATMEL_US_CTSIC)
- uart_handle_cts_change(port, !(status & ATMEL_US_CTS));
+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *)port;
+
if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC
- | ATMEL_US_CTSIC))
- wake_up_interruptible(&port->info->delta_msr_wait);
+ | ATMEL_US_CTSIC)) {
+ atmel_port->irq_status = status;
+ tasklet_schedule(&atmel_port->tasklet);
+ }
}
/*
@@ -431,6 +438,114 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static void atmel_rx_from_ring(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *)port;
+ struct circ_buf *ring = &atmel_port->rx_ring;
+ unsigned int flg;
+ unsigned int status;
+
+ while (ring->head != ring->tail) {
+ struct atmel_uart_char c;
+
+ /* Make sure c is loaded after head. */
+ smp_rmb();
+
+ c = ((struct atmel_uart_char *)ring->buf)[ring->tail];
+
+ ring->tail = (ring->tail + 1) & (ATMEL_SERIAL_RINGSIZE - 1);
+
+ port->icount.rx++;
+ status = c.status;
+ flg = TTY_NORMAL;
+
+ /*
+ * note that the error handling code is
+ * out of the main execution path
+ */
+ if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
+ | ATMEL_US_OVRE | ATMEL_US_RXBRK))) {
+ if (status & ATMEL_US_RXBRK) {
+ /* ignore side-effect */
+ status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);
+
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ continue;
+ }
+ if (status & ATMEL_US_PARE)
+ port->icount.parity++;
+ if (status & ATMEL_US_FRAME)
+ port->icount.frame++;
+ if (status & ATMEL_US_OVRE)
+ port->icount.overrun++;
+
+ status &= port->read_status_mask;
+
+ if (status & ATMEL_US_RXBRK)
+ flg = TTY_BREAK;
+ else if (status & ATMEL_US_PARE)
+ flg = TTY_PARITY;
+ else if (status & ATMEL_US_FRAME)
+ flg = TTY_FRAME;
+ }
+
+
+ if (uart_handle_sysrq_char(port, c.ch))
+ continue;
+
+ uart_insert_char(port, status, ATMEL_US_OVRE, c.ch, flg);
+ }
+
+ /*
+ * Drop the lock here since it might end up calling
+ * uart_start(), which takes the lock.
+ */
+ spin_unlock(&port->lock);
+ tty_flip_buffer_push(port->info->tty);
+ spin_lock(&port->lock);
+}
+
+/*
+ * tasklet handling tty stuff outside the interrupt handler.
+ */
+static void atmel_tasklet_func(unsigned long data)
+{
+ struct uart_port *port = (struct uart_port *)data;
+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *)port;
+ unsigned int status;
+ unsigned int status_change;
+
+ /* The interrupt handler does not take the lock */
+ spin_lock(&port->lock);
+
+ atmel_tx_chars(port);
+
+ status = atmel_port->irq_status;
+ status_change = status ^ atmel_port->irq_status_prev;
+
+ if (status_change & (ATMEL_US_RI | ATMEL_US_DSR
+ | ATMEL_US_DCD | ATMEL_US_CTS)) {
+ /* TODO: All reads to CSR will clear these interrupts! */
+ if (status_change & ATMEL_US_RI)
+ port->icount.rng++;
+ if (status_change & ATMEL_US_DSR)
+ port->icount.dsr++;
+ if (status_change & ATMEL_US_DCD)
+ uart_handle_dcd_change(port, !(status & ATMEL_US_DCD));
+ if (status_change & ATMEL_US_CTS)
+ uart_handle_cts_change(port, !(status & ATMEL_US_CTS));
+
+ wake_up_interruptible(&port->info->delta_msr_wait);
+
+ atmel_port->irq_status_prev = status;
+ }
+
+ atmel_rx_from_ring(port);
+
+ spin_unlock(&port->lock);
+}
+
/*
* Perform initialization and enable port for reception
*/
@@ -762,6 +877,11 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port,
port->mapbase = pdev->resource[0].start;
port->irq = pdev->resource[1].start;
+ tasklet_init(&atmel_port->tasklet, atmel_tasklet_func,
+ (unsigned long)port);
+
+ memset(&atmel_port->rx_ring, 0, sizeof(atmel_port->rx_ring));
+
if (data->regs)
/* Already mapped by setup code */
port->membase = data->regs;
@@ -1001,11 +1121,20 @@ static int atmel_serial_resume(struct platform_device *pdev)
static int __devinit atmel_serial_probe(struct platform_device *pdev)
{
struct atmel_uart_port *port;
+ void *data;
int ret;
+ BUILD_BUG_ON(!is_power_of_2(ATMEL_SERIAL_RINGSIZE));
+
port = &atmel_ports[pdev->id];
atmel_init_port(port, pdev);
+ ret = -ENOMEM;
+ data = kmalloc(ATMEL_SERIAL_RINGSIZE, GFP_KERNEL);
+ if (!data)
+ goto err_alloc_ring;
+ port->rx_ring.buf = data;
+
ret = uart_add_one_port(&atmel_uart, &port->uart);
if (ret)
goto err_add_port;
@@ -1016,6 +1145,9 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev)
return 0;
err_add_port:
+ kfree(port->rx_ring.buf);
+ port->rx_ring.buf = NULL;
+err_alloc_ring:
if (!atmel_is_console_port(&port->uart)) {
clk_disable(port->clk);
clk_put(port->clk);
@@ -1036,6 +1168,9 @@ static int __devexit atmel_serial_remove(struct platform_device *pdev)
ret = uart_remove_one_port(&atmel_uart, port);
+ tasklet_kill(&atmel_port->tasklet);
+ kfree(atmel_port->rx_ring.buf);
+
/* "port" is allocated statically, so we shouldn't free it */
clk_disable(atmel_port->clk);
--
1.5.3.7
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/