[PATCHv2 8/8] [POWERPC] Move definition of buffer descriptor to cpm.h

From: Jochen Friedrich
Date: Wed Jan 23 2008 - 11:03:16 EST

Next message: Steven Rostedt: "[PATCH 00/20 -v5] mcount and latency tracing utility -v5"
Previous message: Jochen Friedrich: "[PATCHv2 7/8] [POWERPC] Rename commproc to cpm1 and cpm2_common.cto cpm2.c"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Buffer descriptors are used by both CPM1 and CPM2. Move the definitions
from the cpm dependent include file to common cpm.h

Signed-off-by: Jochen Friedrich <jochen@xxxxxxxx>
---
include/asm-powerpc/cpm.h | 73 ++++++++++++++++++++++++++++++++++++++++++++
include/asm-powerpc/cpm1.h | 65 ---------------------------------------
include/asm-powerpc/cpm2.h | 64 --------------------------------------
3 files changed, 73 insertions(+), 129 deletions(-)

diff --git a/include/asm-powerpc/cpm.h b/include/asm-powerpc/cpm.h
index fae83b1..77e39da 100644
--- a/include/asm-powerpc/cpm.h
+++ b/include/asm-powerpc/cpm.h
@@ -4,6 +4,79 @@
#include <linux/compiler.h>
#include <linux/types.h>

+/* Buffer descriptors used by many of the CPM protocols. */
+typedef struct cpm_buf_desc {
+ ushort cbd_sc; /* Status and Control */
+ ushort cbd_datlen; /* Data length in buffer */
+ uint cbd_bufaddr; /* Buffer address in host memory */
+} cbd_t;
+
+/* Buffer descriptor control/status used by serial
+ */
+
+#define BD_SC_EMPTY (0x8000) /* Receive is empty */
+#define BD_SC_READY (0x8000) /* Transmit is ready */
+#define BD_SC_WRAP (0x2000) /* Last buffer descriptor */
+#define BD_SC_INTRPT (0x1000) /* Interrupt on change */
+#define BD_SC_LAST (0x0800) /* Last buffer in frame */
+#define BD_SC_TC (0x0400) /* Transmit CRC */
+#define BD_SC_CM (0x0200) /* Continous mode */
+#define BD_SC_ID (0x0100) /* Rec'd too many idles */
+#define BD_SC_P (0x0100) /* xmt preamble */
+#define BD_SC_BR (0x0020) /* Break received */
+#define BD_SC_FR (0x0010) /* Framing error */
+#define BD_SC_PR (0x0008) /* Parity error */
+#define BD_SC_NAK (0x0004) /* NAK - did not respond */
+#define BD_SC_OV (0x0002) /* Overrun */
+#define BD_SC_UN (0x0002) /* Underrun */
+#define BD_SC_CD (0x0001) /* */
+#define BD_SC_CL (0x0001) /* Collision */
+
+/* Buffer descriptor control/status used by Ethernet receive.
+ * Common to SCC and FCC.
+ */
+#define BD_ENET_RX_EMPTY (0x8000)
+#define BD_ENET_RX_WRAP (0x2000)
+#define BD_ENET_RX_INTR (0x1000)
+#define BD_ENET_RX_LAST (0x0800)
+#define BD_ENET_RX_FIRST (0x0400)
+#define BD_ENET_RX_MISS (0x0100)
+#define BD_ENET_RX_BC (0x0080) /* FCC Only */
+#define BD_ENET_RX_MC (0x0040) /* FCC Only */
+#define BD_ENET_RX_LG (0x0020)
+#define BD_ENET_RX_NO (0x0010)
+#define BD_ENET_RX_SH (0x0008)
+#define BD_ENET_RX_CR (0x0004)
+#define BD_ENET_RX_OV (0x0002)
+#define BD_ENET_RX_CL (0x0001)
+#define BD_ENET_RX_STATS (0x01ff) /* All status bits */
+
+/* Buffer descriptor control/status used by Ethernet transmit.
+ * Common to SCC and FCC.
+ */
+#define BD_ENET_TX_READY (0x8000)
+#define BD_ENET_TX_PAD (0x4000)
+#define BD_ENET_TX_WRAP (0x2000)
+#define BD_ENET_TX_INTR (0x1000)
+#define BD_ENET_TX_LAST (0x0800)
+#define BD_ENET_TX_TC (0x0400)
+#define BD_ENET_TX_DEF (0x0200)
+#define BD_ENET_TX_HB (0x0100)
+#define BD_ENET_TX_LC (0x0080)
+#define BD_ENET_TX_RL (0x0040)
+#define BD_ENET_TX_RCMASK (0x003c)
+#define BD_ENET_TX_UN (0x0002)
+#define BD_ENET_TX_CSL (0x0001)
+#define BD_ENET_TX_STATS (0x03ff) /* All status bits */
+
+/* Buffer descriptor control/status used by Transparent mode SCC.
+ */
+#define BD_SCC_TX_LAST (0x0800)
+
+/* Buffer descriptor control/status used by I2C.
+ */
+#define BD_I2C_START (0x0400)
+
int cpm_muram_init(void);
unsigned long cpm_muram_alloc(unsigned long size, unsigned long align);
int cpm_muram_free(unsigned long offset);
diff --git a/include/asm-powerpc/cpm1.h b/include/asm-powerpc/cpm1.h
index 901a00b..b2ebd6a 100644
--- a/include/asm-powerpc/cpm1.h
+++ b/include/asm-powerpc/cpm1.h
@@ -91,32 +91,6 @@ extern void cpm_load_patch(cpm8xx_t *cp);

extern void cpm_reset(void);

-/* Buffer descriptors used by many of the CPM protocols.
-*/
-typedef struct cpm_buf_desc {
- ushort cbd_sc; /* Status and Control */
- ushort cbd_datlen; /* Data length in buffer */
- uint cbd_bufaddr; /* Buffer address in host memory */
-} cbd_t;
-
-#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */
-#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
-#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */
-#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
-#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */
-#define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */
-#define BD_SC_CM ((ushort)0x0200) /* Continous mode */
-#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */
-#define BD_SC_P ((ushort)0x0100) /* xmt preamble */
-#define BD_SC_BR ((ushort)0x0020) /* Break received */
-#define BD_SC_FR ((ushort)0x0010) /* Framing error */
-#define BD_SC_PR ((ushort)0x0008) /* Parity error */
-#define BD_SC_NAK ((ushort)0x0004) /* NAK - did not respond */
-#define BD_SC_OV ((ushort)0x0002) /* Overrun */
-#define BD_SC_UN ((ushort)0x0002) /* Underrun */
-#define BD_SC_CD ((ushort)0x0001) /* ?? */
-#define BD_SC_CL ((ushort)0x0001) /* Collision */
-
/* Parameter RAM offsets.
*/
#define PROFF_SCC1 ((uint)0x0000)
@@ -446,41 +420,6 @@ typedef struct scc_enet {
#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */
#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */

-/* Buffer descriptor control/status used by Ethernet receive.
-*/
-#define BD_ENET_RX_EMPTY ((ushort)0x8000)
-#define BD_ENET_RX_WRAP ((ushort)0x2000)
-#define BD_ENET_RX_INTR ((ushort)0x1000)
-#define BD_ENET_RX_LAST ((ushort)0x0800)
-#define BD_ENET_RX_FIRST ((ushort)0x0400)
-#define BD_ENET_RX_MISS ((ushort)0x0100)
-#define BD_ENET_RX_LG ((ushort)0x0020)
-#define BD_ENET_RX_NO ((ushort)0x0010)
-#define BD_ENET_RX_SH ((ushort)0x0008)
-#define BD_ENET_RX_CR ((ushort)0x0004)
-#define BD_ENET_RX_OV ((ushort)0x0002)
-#define BD_ENET_RX_CL ((ushort)0x0001)
-#define BD_ENET_RX_BC ((ushort)0x0080) /* DA is Broadcast */
-#define BD_ENET_RX_MC ((ushort)0x0040) /* DA is Multicast */
-#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */
-
-/* Buffer descriptor control/status used by Ethernet transmit.
-*/
-#define BD_ENET_TX_READY ((ushort)0x8000)
-#define BD_ENET_TX_PAD ((ushort)0x4000)
-#define BD_ENET_TX_WRAP ((ushort)0x2000)
-#define BD_ENET_TX_INTR ((ushort)0x1000)
-#define BD_ENET_TX_LAST ((ushort)0x0800)
-#define BD_ENET_TX_TC ((ushort)0x0400)
-#define BD_ENET_TX_DEF ((ushort)0x0200)
-#define BD_ENET_TX_HB ((ushort)0x0100)
-#define BD_ENET_TX_LC ((ushort)0x0080)
-#define BD_ENET_TX_RL ((ushort)0x0040)
-#define BD_ENET_TX_RCMASK ((ushort)0x003c)
-#define BD_ENET_TX_UN ((ushort)0x0002)
-#define BD_ENET_TX_CSL ((ushort)0x0001)
-#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
-
/* SCC as UART
*/
typedef struct scc_uart {
@@ -549,8 +488,6 @@ typedef struct scc_trans {
uint st_cmask; /* Constant mask for CRC */
} scc_trans_t;

-#define BD_SCC_TX_LAST ((ushort)0x0800)
-
/* IIC parameter RAM.
*/
typedef struct iic {
@@ -574,8 +511,6 @@ typedef struct iic {
char res2[2]; /* Reserved */
} iic_t;

-#define BD_IIC_START ((ushort)0x0400)
-
/* SPI parameter RAM.
*/
typedef struct spi {
diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h
index f1112c1..b93a53e 100644
--- a/include/asm-powerpc/cpm2.h
+++ b/include/asm-powerpc/cpm2.h
@@ -132,29 +132,6 @@ extern void cpm_setbrg(uint brg, uint rate);
extern void cpm2_fastbrg(uint brg, uint rate, int div16);
extern void cpm2_reset(void);

-
-/* Buffer descriptors used by many of the CPM protocols.
-*/
-typedef struct cpm_buf_desc {
- ushort cbd_sc; /* Status and Control */
- ushort cbd_datlen; /* Data length in buffer */
- uint cbd_bufaddr; /* Buffer address in host memory */
-} cbd_t;
-
-#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */
-#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
-#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */
-#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
-#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */
-#define BD_SC_CM ((ushort)0x0200) /* Continous mode */
-#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */
-#define BD_SC_P ((ushort)0x0100) /* xmt preamble */
-#define BD_SC_BR ((ushort)0x0020) /* Break received */
-#define BD_SC_FR ((ushort)0x0010) /* Framing error */
-#define BD_SC_PR ((ushort)0x0008) /* Parity error */
-#define BD_SC_OV ((ushort)0x0002) /* Overrun */
-#define BD_SC_CD ((ushort)0x0001) /* ?? */
-
/* Function code bits, usually generic to devices.
*/
#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */
@@ -456,43 +433,6 @@ typedef struct scc_enet {
#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */
#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */

-/* Buffer descriptor control/status used by Ethernet receive.
- * Common to SCC and FCC.
- */
-#define BD_ENET_RX_EMPTY ((ushort)0x8000)
-#define BD_ENET_RX_WRAP ((ushort)0x2000)
-#define BD_ENET_RX_INTR ((ushort)0x1000)
-#define BD_ENET_RX_LAST ((ushort)0x0800)
-#define BD_ENET_RX_FIRST ((ushort)0x0400)
-#define BD_ENET_RX_MISS ((ushort)0x0100)
-#define BD_ENET_RX_BC ((ushort)0x0080) /* FCC Only */
-#define BD_ENET_RX_MC ((ushort)0x0040) /* FCC Only */
-#define BD_ENET_RX_LG ((ushort)0x0020)
-#define BD_ENET_RX_NO ((ushort)0x0010)
-#define BD_ENET_RX_SH ((ushort)0x0008)
-#define BD_ENET_RX_CR ((ushort)0x0004)
-#define BD_ENET_RX_OV ((ushort)0x0002)
-#define BD_ENET_RX_CL ((ushort)0x0001)
-#define BD_ENET_RX_STATS ((ushort)0x01ff) /* All status bits */
-
-/* Buffer descriptor control/status used by Ethernet transmit.
- * Common to SCC and FCC.
- */
-#define BD_ENET_TX_READY ((ushort)0x8000)
-#define BD_ENET_TX_PAD ((ushort)0x4000)
-#define BD_ENET_TX_WRAP ((ushort)0x2000)
-#define BD_ENET_TX_INTR ((ushort)0x1000)
-#define BD_ENET_TX_LAST ((ushort)0x0800)
-#define BD_ENET_TX_TC ((ushort)0x0400)
-#define BD_ENET_TX_DEF ((ushort)0x0200)
-#define BD_ENET_TX_HB ((ushort)0x0100)
-#define BD_ENET_TX_LC ((ushort)0x0080)
-#define BD_ENET_TX_RL ((ushort)0x0040)
-#define BD_ENET_TX_RCMASK ((ushort)0x003c)
-#define BD_ENET_TX_UN ((ushort)0x0002)
-#define BD_ENET_TX_CSL ((ushort)0x0001)
-#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
-
/* SCC as UART
*/
typedef struct scc_uart {
@@ -562,8 +502,6 @@ typedef struct scc_trans {
uint st_cmask; /* Constant mask for CRC */
} scc_trans_t;

-#define BD_SCC_TX_LAST ((ushort)0x0800)
-
/* How about some FCCs.....
*/
#define FCC_GFMR_DIAG_NORM ((uint)0x00000000)
@@ -769,8 +707,6 @@ typedef struct spi {

#define SPI_EB ((u_char)0x10) /* big endian byte order */

-#define BD_IIC_START ((ushort)0x0400)
-
/* IDMA parameter RAM
*/
typedef struct idma {
--
1.5.3.8

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Steven Rostedt: "[PATCH 00/20 -v5] mcount and latency tracing utility -v5"
Previous message: Jochen Friedrich: "[PATCHv2 7/8] [POWERPC] Rename commproc to cpm1 and cpm2_common.cto cpm2.c"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]