Re: Troubles waking up from suspend (S3) - how to debug?

[R. J. Wysocki]

On Sunday, 27 of January 2008, Bruno Prémont wrote:
> I'm currently trying out suspend (S3) on a few machines but none of them wakes 
> up completely/properly (I have a few more hosts I'm planning to try suspend 
> on once I can get useful information out of those not waking up properly).
> 
> Tested kernels: 2.6.24(-rc8), on one 2.6.23.8
> 
> To suspend I enter the following from console:
>   echo -n mem > /sys/power/state
> 

Please try s2ram (http://suspend.sf.net/s2ram-support.html).

> Fujitsu-Siemens S7020 laptop (i915GM based):
>   Works fine except backlight that remains asleep and Xorg vesa driver
>   crashing Xorg.
>   It looks like a suspend cycle discards the VideoBIOS shadow copy.
>   Adjusting brightness using hotkeys or acpi-fujitsusiemens does not help
>   waking up the backlight.
>   At best backlight comes back when suspending from Xorg with
>   xf86-video-intel-2.2.x but then mode is distorded. Any attempt to fix this
>   using xrandr or switch to/from console puts backlight asleep.

This one is on the s2ram whitelist, should work.

> Acer Travelmate 660 laptop (i855GM based):
>   Laptop suspends as expected but hangs while waking up.

This might work with "s2ram -f --vbe_post --vbe_save", please try.
 
> Desktop with MSI nforce based mainboard with Athlon CPU, onboard graphics

What kind?

> and hdd on HighPoint RR1640 PCI card (USB mouse & keyboard):
>   Suspends as expected but hangs while waking up.
>   During wakeup I can ping the computer but userspace does not respond (e.g.
>   no answer when trying to connect via ssh)
>   The display remains off if using vga text console, display comes back with
>   garbadge when using nvidiafb (no Xorg running), USB is powered but triggers
>   no reactions on keyboard/mouse input
> 
> 
> I tried using netconsole on the desktop computer to capture eventual printks 
> during resume but I got not a line during wakup. (only suspend progress 
> messages before actual suspend)
> 
> What can I do to get more information out of those two last machines and find 
> out why they don't wake-up properly?

Please apply the patches 01-11 from:
http://www.sisk.pl/kernel/hibernation_and_suspend/2.6.24/patches/
on top of 2.6.24, compile the kernel and install it.  After booting, please do:

# echo core > /sys/power/pm_test
# echo mem > /sys/power/state

and see if the boxes survive it (this causes the suspend/resume sequence to
be executed without acutally suspending, but busy-waiting for 5 sec. instead).

Greetings,
Rafael
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/