Re: 2.6.25-rc3-mm1

From: Pavel Emelyanov
Date: Wed Mar 05 2008 - 09:29:08 EST


Kay Sievers wrote:
> On Wed, 2008-03-05 at 16:38 +0300, Pavel Emelyanov wrote:
>> Kay Sievers wrote:
>>> On Wed, 2008-03-05 at 16:04 +0300, Pavel Emelyanov wrote:
>>>> With CONFIG_SYSFS not set got this on boot:
>>>>
>>>> kobject: '<NULL>' (f88774c8): is not initialized, yet kobject_put() is
>>>> ------------[ cut here ]------------
>>>> WARNING: at lib/kobject.c:652 kobject_put+0x29/0x3c()
>>>> Modules linked in: sky2 e1000
>>>> Pid: 1303, comm: modprobe Not tainted 2.6.25-rc3-mm1 #79
>>>> [<c041855b>] warn_on_slowpath+0x40/0x66
>>>> [<c041c687>] irq_exit+0x50/0x67
>>>> [<c040cc70>] smp_apic_timer_interrupt+0x6e/0x7a
>>>> [<c0403380>] apic_timer_interrupt+0x28/0x30
>>>> [<c0418e36>] vprintk+0x2b0/0x2df
>>>> [<c04118e8>] __update_rq_clock+0x1d/0x110
>>>> [<c0565e43>] schedule_timeout+0x13/0x86
>>>>
>>>> [<c05656c2>] wait_for_common+0xd1/0x123
>>>> [<c0418e79>] printk+0x14/0x18
>>>> [<c04b34bf>] kobject_put+0x29/0x3c
>>>> [<c0431e39>] free_module+0x2f/0x72
>>>> [<c04328dd>] sys_init_module+0xa61/0x15d2
>>>>
>>>> [<c04ba863>] pci_bus_read_config_byte+0x0/0x58
>>>> [<c0454f87>] vfs_read+0x6c/0x8b
>>>> [<c0455323>] sys_read+0x3c/0x63
>>>> [<c04028b2>] sysenter_past_esp+0x5f/0x85
>>>>
>>>> =======================
>>>> ---[ end trace d50646e8e8e48682 ]---
>>> Does this fix it?:
>>>
>>> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=120fc3d77acfd91f3521737a440d42839c475982
>> This is already in 2.6.25-rc3-mm1, so the answer is "no it does not" :)
>
> Ok. Care to enable CONFIG_DEBUG_KOBJECT, and post the part of the log
> that happens right before the WARN()? We might get a hint where to look
> for the stuff that goes wrong.

Hm... Not sure how may lines are required, but here'are the ones
that are related to sky2 module, which is loaded and then removed:

kobject: 'sky2' (f74de280): kobject_add_internal: parent: 'drivers', set: 'drivers'
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 0000:02:00.0: v1.21 addr 0xdeefc000 irq 16 Yukon-EC (0xb6) rev 2
kobject: 'net' (f7512200): kobject_add_internal: parent: '0000:02:00.0', set: '<NULL>'
kobject: 'eth1' (f74ccb64): kobject_add_internal: parent: 'net', set: 'devices'
kobject: 'eth1' (f74ccb64): kobject_uevent_env
kobject: 'eth1' (f74ccb64): fill_kobj_path: path = '/devices/pci0000:00/0000:00:03.0/0000:02:00.0/net/eth1'
sky2 eth1: addr 00:0e:0c:3b:d8:8a
kobject: 'sky2' (f74de280): kobject_uevent_env
kobject: 'sky2' (f74de280): fill_kobj_path: path = '/bus/pci/drivers/sky2'
sky2 eth1: enabling interface
sky2 eth1: disabling interface
kobject: 'eth1' (f74ccb64): kobject_uevent_env
kobject: 'eth1' (f74ccb64): fill_kobj_path: path = '/devices/pci0000:00/0000:00:03.0/0000:02:00.0/net/eth1'
kobject: 'net' (f7512200): kobject_cleanup

kobject: 'net' (f7512200): auto cleanup kobject_del
kobject: 'net' (f7512200): calling ktype release
kobject: (f7512200): dynamic_kobj_release
kobject: 'net': free name
kobject: 'eth1' (f74ccb64): kobject_cleanup
kobject: 'eth1' (f74ccb64): calling ktype release
kobject: 'eth1': free name
kobject: 'sky2' (f74de280): kobject_cleanup

kobject: 'sky2' (f74de280): auto cleanup 'remove' event
kobject: 'sky2' (f74de280): kobject_uevent_env
kobject: 'sky2' (f74de280): fill_kobj_path: path = '/bus/pci/drivers/sky2'
kobject: 'sky2' (f74de280): auto cleanup kobject_del
kobject: 'sky2' (f74de280): calling ktype release

kobject: 'sky2': free name
kobject: '<NULL>' (f886cb48): is not initialized, yet kobject_put() is being called.
------------[ cut here ]------------
WARNING: at lib/kobject.c:652 kobject_put+0x29/0x3c()
Modules linked in: e1000 [last unloaded: sky2]
Pid: 3188, comm: rmmod Tainted: G W 2.6.25-rc3-mm1 #88
[<c041855b>] warn_on_slowpath+0x40/0x66

[<c041c687>] irq_exit+0x50/0x67
[<c040cc70>] smp_apic_timer_interrupt+0x6e/0x7a
[<c0403380>] apic_timer_interrupt+0x28/0x30
[<c0418e36>] vprintk+0x2b0/0x2df
[<c04118e8>] __update_rq_clock+0x1d/0x110
[<c0565f43>] schedule_timeout+0x13/0x86
[<c05657c2>] wait_for_common+0xd1/0x123
[<c0418e79>] printk+0x14/0x18
[<c04b3474>] kobject_put+0x29/0x3c
[<c0431e39>] free_module+0x2f/0x72
[<c0433a09>] sys_delete_module+0x19a/0x1b1
[<c040f866>] do_page_fault+0x1f6/0x4cc
[<c04028b2>] sysenter_past_esp+0x5f/0x85

=======================

But this happens _after_ the very first warning and I can't figure
out which modules causes one :( Do you need a full dmesg for that?

> Thanks,
> Kay
>
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/