Re: [bug] SLUB + mm/slab.c boot crash in -rc9

From: Ingo Molnar
Date: Tue Apr 15 2008 - 16:58:56 EST



* Christoph Lameter <clameter@xxxxxxx> wrote:

> Vexing. The failure in the slabs suggests that no lowmem pages were
> freed during the walk of the bootmem bitmaps. Could you call show_mem
> before kmem_cache_init() runs?

sure - find the crashlog below.

but it seems there's plenty of free RAM in the buddy:

[ 0.000999] DMA: 3*4kB 2*8kB 4*16kB 2*32kB 3*64kB 1*128kB 1*256kB
0*512kB 1*1024kB 1*2048kB 0*4096kB = 3804kB

[ 0.000999] Normal: 54*4kB 54*8kB 54*16kB 54*32kB 54*64kB 60*128kB
60*256kB 0*512kB 1*1024kB 0*2048kB 197*4096kB =
837672kB

and the bug pattern seems to be memory corruption - not memory
exhaustion.

i.e. we allocated RAM but it got corrupted after allocation.

Ingo

Index: linux/init/main.c
===================================================================
--- linux.orig/init/main.c
+++ linux/init/main.c
@@ -609,6 +609,7 @@ asmlinkage void __init start_kernel(void
mem_init();
enable_debug_pagealloc();
cpu_hotplug_init();
+ show_mem();
kmem_cache_init();
setup_per_cpu_pageset();
numa_policy_init();

[ 0.000000] Linux version 2.6.25-rc9 (mingo@dione) (gcc version 4.2.2) #968 SMP Tue Apr 15 22:39:35 CEST 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000efff8000 (usable)
[ 0.000000] BIOS-e820: 00000000efff8000 - 00000000f0000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000110000000 (usable)
[ 0.000000] console [earlyser0] enabled
[ 0.000000] Warning only 896MB will be used.
[ 0.000000] Use a HIGHMEM64G enabled kernel.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Scan SMP from c0000000 for 1024 bytes.
[ 0.000000] Scan SMP from c009fc00 for 1024 bytes.
[ 0.000000] Scan SMP from c00f0000 for 65536 bytes.
[ 0.000000] found SMP MP-table at [c00f4fd0] 000f4fd0
[ 0.000000] sparse_init()
[ 0.000000] section 0: sparse_mem_map_populate2(#0, (nd:0)): c1000000
[ 0.000000] map: c1000000, usemap: c1100000 [content: c1000003]
[ 0.000000] section 1: sparse_mem_map_populate2(#1, (nd:0)): c1180000
[ 0.000000] map: c1180000, usemap: c1280000 [content: c1100003]
[ 0.000000] section 2: sparse_mem_map_populate2(#2, (nd:0)): c1300000
[ 0.000000] map: c1300000, usemap: c1400000 [content: c1200003]
[ 0.000000] section 3: sparse_mem_map_populate2(#3, (nd:0)): c1480000
[ 0.000000] map: c1480000, usemap: c1580000 [content: c1300003]
[ 0.000000] section 4: sparse_mem_map_populate2(#4, (nd:0)): c1600000
[ 0.000000] map: c1600000, usemap: c1700000 [content: c1400003]
[ 0.000000] section 5: sparse_mem_map_populate2(#5, (nd:0)): c1780000
[ 0.000000] map: c1780000, usemap: c1880000 [content: c1500003]
[ 0.000000] section 6: sparse_mem_map_populate2(#6, (nd:0)): c1900000
[ 0.000000] map: c1900000, usemap: c1a00000 [content: c1600003]
[ 0.000000] section 7: sparse_mem_map_populate2(#7, (nd:0)): c1a80000
[ 0.000000] map: c1a80000, usemap: c1b80000 [content: c1700003]
[ 0.000000] section 8: sparse_mem_map_populate2(#8, (nd:0)): c1c00000
[ 0.000000] map: c1c00000, usemap: c1d00000 [content: c1800003]
[ 0.000000] section 9: sparse_mem_map_populate2(#9, (nd:0)): c1d80000
[ 0.000000] map: c1d80000, usemap: c1e80000 [content: c1900003]
[ 0.000000] section 10: sparse_mem_map_populate2(#10, (nd:0)): c1f00000
[ 0.000000] map: c1f00000, usemap: c2000000 [content: c1a00003]
[ 0.000000] section 11: sparse_mem_map_populate2(#11, (nd:0)): c2080000
[ 0.000000] map: c2080000, usemap: c2180000 [content: c1b00003]
[ 0.000000] section 12: sparse_mem_map_populate2(#12, (nd:0)): c2200000
[ 0.000000] map: c2200000, usemap: c2300000 [content: c1c00003]
[ 0.000000] section 13: sparse_mem_map_populate2(#13, (nd:0)): c2380000
[ 0.000000] map: c2380000, usemap: c2480000 [content: c1d00003]
[ 0.000000] section 14: sparse_mem_map_populate2(#14, (nd:0)): c2500000
[ 0.000000] map: c2500000, usemap: c2600000 [content: c1e00003]
[ 0.000000] section 15: sparse_mem_map_populate2(#15, (nd:0)): c2680000
[ 0.000000] map: c2680000, usemap: c2780000 [content: c1f00003]
[ 0.000000] section 16: sparse_mem_map_populate2(#16, (nd:0)): c2800000
[ 0.000000] map: c2800000, usemap: c2900000 [content: c2000003]
[ 0.000000] section 17: sparse_mem_map_populate2(#17, (nd:0)): c2980000
[ 0.000000] map: c2980000, usemap: c2a80000 [content: c2100003]
[ 0.000000] section 18: sparse_mem_map_populate2(#18, (nd:0)): c2b00000
[ 0.000000] map: c2b00000, usemap: c2c00000 [content: c2200003]
[ 0.000000] section 19: sparse_mem_map_populate2(#19, (nd:0)): c2c80000
[ 0.000000] map: c2c80000, usemap: c2d80000 [content: c2300003]
[ 0.000000] section 20: sparse_mem_map_populate2(#20, (nd:0)): c2e00000
[ 0.000000] map: c2e00000, usemap: c2f00000 [content: c2400003]
[ 0.000000] section 21: sparse_mem_map_populate2(#21, (nd:0)): c2f80000
[ 0.000000] map: c2f80000, usemap: c3080000 [content: c2500003]
[ 0.000000] section 22: sparse_mem_map_populate2(#22, (nd:0)): c3100000
[ 0.000000] map: c3100000, usemap: c3200000 [content: c2600003]
[ 0.000000] section 23: sparse_mem_map_populate2(#23, (nd:0)): c3280000
[ 0.000000] map: c3280000, usemap: c3380000 [content: c2700003]
[ 0.000000] section 24: sparse_mem_map_populate2(#24, (nd:0)): c3400000
[ 0.000000] map: c3400000, usemap: c3500000 [content: c2800003]
[ 0.000000] section 25: sparse_mem_map_populate2(#25, (nd:0)): c3580000
[ 0.000000] map: c3580000, usemap: c3680000 [content: c2900003]
[ 0.000000] section 26: sparse_mem_map_populate2(#26, (nd:0)): c3700000
[ 0.000000] map: c3700000, usemap: c3800000 [content: c2a00003]
[ 0.000000] section 27: sparse_mem_map_populate2(#27, (nd:0)): c3880000
[ 0.000000] map: c3880000, usemap: c3980000 [content: c2b00003]
[ 0.000000] section 28: sparse_mem_map_populate2(#28, (nd:0)): c3a00000
[ 0.000000] map: c3a00000, usemap: c3b00000 [content: c2c00003]
[ 0.000000] section 29: sparse_mem_map_populate2(#29, (nd:0)): c3b80000
[ 0.000000] map: c3b80000, usemap: c3c80000 [content: c2d00003]
[ 0.000000] section 30: sparse_mem_map_populate2(#30, (nd:0)): c3d00000
[ 0.000000] map: c3d00000, usemap: c3e00000 [content: c2e00003]
[ 0.000000] section 31: sparse_mem_map_populate2(#31, (nd:0)): c3e80000
[ 0.000000] map: c3e80000, usemap: c3f80000 [content: c2f00003]
[ 0.000000] section 32: sparse_mem_map_populate2(#32, (nd:0)): c4000000
[ 0.000000] map: c4000000, usemap: c4100000 [content: c3000003]
[ 0.000000] section 33: sparse_mem_map_populate2(#33, (nd:0)): c4180000
[ 0.000000] map: c4180000, usemap: c4280000 [content: c3100003]
[ 0.000000] section 34: sparse_mem_map_populate2(#34, (nd:0)): c4300000
[ 0.000000] map: c4300000, usemap: c4400000 [content: c3200003]
[ 0.000000] section 35: sparse_mem_map_populate2(#35, (nd:0)): c4480000
[ 0.000000] map: c4480000, usemap: c4580000 [content: c3300003]
[ 0.000000] section 36: sparse_mem_map_populate2(#36, (nd:0)): c4600000
[ 0.000000] map: c4600000, usemap: c4700000 [content: c3400003]
[ 0.000000] section 37: sparse_mem_map_populate2(#37, (nd:0)): c4780000
[ 0.000000] map: c4780000, usemap: c4880000 [content: c3500003]
[ 0.000000] section 38: sparse_mem_map_populate2(#38, (nd:0)): c4900000
[ 0.000000] map: c4900000, usemap: c4a00000 [content: c3600003]
[ 0.000000] section 39: sparse_mem_map_populate2(#39, (nd:0)): c4a80000
[ 0.000000] map: c4a80000, usemap: c4b80000 [content: c3700003]
[ 0.000000] section 40: sparse_mem_map_populate2(#40, (nd:0)): c4c00000
[ 0.000000] map: c4c00000, usemap: c4d00000 [content: c3800003]
[ 0.000000] section 41: sparse_mem_map_populate2(#41, (nd:0)): c4d80000
[ 0.000000] map: c4d80000, usemap: c4e80000 [content: c3900003]
[ 0.000000] section 42: sparse_mem_map_populate2(#42, (nd:0)): c4f00000
[ 0.000000] map: c4f00000, usemap: c5000000 [content: c3a00003]
[ 0.000000] section 43: sparse_mem_map_populate2(#43, (nd:0)): c5080000
[ 0.000000] map: c5080000, usemap: c5180000 [content: c3b00003]
[ 0.000000] section 44: sparse_mem_map_populate2(#44, (nd:0)): c5200000
[ 0.000000] map: c5200000, usemap: c5300000 [content: c3c00003]
[ 0.000000] section 45: sparse_mem_map_populate2(#45, (nd:0)): c5380000
[ 0.000000] map: c5380000, usemap: c5480000 [content: c3d00003]
[ 0.000000] section 46: sparse_mem_map_populate2(#46, (nd:0)): c5500000
[ 0.000000] map: c5500000, usemap: c5600000 [content: c3e00003]
[ 0.000000] section 47: sparse_mem_map_populate2(#47, (nd:0)): c5680000
[ 0.000000] map: c5680000, usemap: c5780000 [content: c3f00003]
[ 0.000000] section 48: sparse_mem_map_populate2(#48, (nd:0)): c5800000
[ 0.000000] map: c5800000, usemap: c5900000 [content: c4000003]
[ 0.000000] section 49: sparse_mem_map_populate2(#49, (nd:0)): c5980000
[ 0.000000] map: c5980000, usemap: c5a80000 [content: c4100003]
[ 0.000000] section 50: sparse_mem_map_populate2(#50, (nd:0)): c5b00000
[ 0.000000] map: c5b00000, usemap: c5c00000 [content: c4200003]
[ 0.000000] section 51: sparse_mem_map_populate2(#51, (nd:0)): c5c80000
[ 0.000000] map: c5c80000, usemap: c5d80000 [content: c4300003]
[ 0.000000] section 52: sparse_mem_map_populate2(#52, (nd:0)): c5e00000
[ 0.000000] map: c5e00000, usemap: c5f00000 [content: c4400003]
[ 0.000000] section 53: sparse_mem_map_populate2(#53, (nd:0)): c5f80000
[ 0.000000] map: c5f80000, usemap: c6080000 [content: c4500003]
[ 0.000000] section 54: sparse_mem_map_populate2(#54, (nd:0)): c6100000
[ 0.000000] map: c6100000, usemap: c6200000 [content: c4600003]
[ 0.000000] section 55: sparse_mem_map_populate2(#55, (nd:0)): c6280000
[ 0.000000] map: c6280000, usemap: c6380000 [content: c4700003]
[ 0.000000] section 56: sparse_mem_map_populate2(#56, (nd:0)): c6400000
[ 0.000000] map: c6400000, usemap: c6500000 [content: c4800003]
[ 0.000000] section 57: sparse_mem_map_populate2(#57, (nd:0)): c6580000
[ 0.000000] map: c6580000, usemap: c6680000 [content: c4900003]
[ 0.000000] section 58: sparse_mem_map_populate2(#58, (nd:0)): c6700000
[ 0.000000] map: c6700000, usemap: c6800000 [content: c4a00003]
[ 0.000000] section 59: sparse_mem_map_populate2(#59, (nd:0)): c6880000
[ 0.000000] map: c6880000, usemap: c6980000 [content: c4b00003]
[ 0.000000] section 60: !present
[ 0.000000] section 61: !present
[ 0.000000] section 62: !present
[ 0.000000] section 63: !present
[ 0.000000] Entering add_active_range(0, 0, 229376) 0 entries of 256 used
[ 0.000000] max_zone_pfn[max:3]:
[ 0.000000] # 0: 4096 [0000000000001000]
[ 0.000000] # 1: 229376 [0000000000038000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 229376
[ 0.000000] On node 0 totalpages: 229376
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] mem_init: 0 -> 4096
[ 0.000000] mem_init: Checking pfn <-> page mappings
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] mem_init: 4096 -> 229376
[ 0.000000] mem_init: Checking pfn <-> page mappings
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000F4F70, 0014 (r0 COMPAQ)
[ 0.000000] ACPI: RSDT EFFF8000, 002C (r1 Compaq 8500____ 1 ï 162E)
[ 0.000000] ACPI: FACP EFFF8040, 0074 (r1 Compaq 8500____ 1 ï 162E)
[ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 0000000000000000/2 [20070126]
[ 0.000000] ACPI: DSDT EFFF81C0, 3D9E (r1 COMPAQ 8500 16 MSFT 100000B)
[ 0.000000] ACPI: FACS EFFF80C0, 0040
[ 0.000000] ACPI: APIC EFFF8100, 00B2 (r1 Compaq 8500____ 1 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x240
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:10 APIC version 17
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:10 APIC version 17
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x02] enabled)
[ 0.000000] Processor #2 6:10 APIC version 17
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
[ 0.000000] Processor #3 6:10 APIC version 17
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] Processor #4 6:10 APIC version 17
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[ 0.000000] Processor #5 6:10 APIC version 17
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
[ 0.000000] Processor #6 6:10 APIC version 17
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x07] enabled)
[ 0.000000] Processor #7 6:10 APIC version 17
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-34
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at f1000000 (gap: f0000000:0ec00000)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227584
[ 0.000000] Kernel command line: root=/dev/ida/c0d0p3 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty 3 nmi_watchdog=0 debug initcall_debug selinux=0 panic=10
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 700.078 MHz processor.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console handover: boot [earlyser0] -> real [tty0]
[ 0.000999] console [ttyS0] enabled
[ 0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000999] Memory: 841476k/917504k available (6673k kernel code, 74928k reserved, 3662k data, 448k init, 0k highmem)
[ 0.000999] virtual kernel memory layout:
[ 0.000999] fixmap : 0xfffb3000 - 0xfffff000 ( 304 kB)
[ 0.000999] vmalloc : 0xf8800000 - 0xfffb1000 ( 119 MB)
[ 0.000999] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.000999] .init : 0xc0b23000 - 0xc0b93000 ( 448 kB)
[ 0.000999] .data : 0xc0784743 - 0xc0b180fc (3662 kB)
[ 0.000999] .text : 0xc0100000 - 0xc0784743 (6673 kB)
[ 0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000999] CPA: page pool initialized 0 of 1 pages preallocated
[ 0.000999] Mem-info:
[ 0.000999] DMA per-cpu:
[ 0.000999] CPU 0: Hot: hi: 0, btch: 1 usd: 0 Cold: hi: 0, btch: 1 usd: 0
[ 0.000999] Normal per-cpu:
[ 0.000999] CPU 0: Hot: hi: 186, btch: 31 usd: 177 Cold: hi: 62, btch: 15 usd: 0
[ 0.000999] Active:0 inactive:0 dirty:0 writeback:0 unstable:0
[ 0.000999] free:210369 slab:0 mapped:0 pagetables:0 bounce:0
[ 0.000999] DMA free:3804kB min:0kB low:0kB high:0kB active:0kB inactive:0kB present:16256kB pages_scanned:0 all_unreclaimable? no
[ 0.000999] lowmem_reserve[]: 0 0 0
[ 0.000999] Normal free:837672kB min:0kB low:0kB high:0kB active:0kB inactive:0kB present:894080kB pages_scanned:0 all_unreclaimable? no
[ 0.000999] lowmem_reserve[]: 0 0 0
[ 0.000999] DMA: 3*4kB 2*8kB 4*16kB 2*32kB 3*64kB 1*128kB 1*256kB 0*512kB 1*1024kB 1*2048kB 0*4096kB = 3804kB
[ 0.000999] Normal: 54*4kB 54*8kB 54*16kB 54*32kB 54*64kB 60*128kB 60*256kB 0*512kB 1*1024kB 0*2048kB 197*4096kB = 837672kB
[ 0.000999] Free swap: 0kB
[ 0.000999] 229376 pages of RAM
[ 0.000999] 0 pages of HIGHMEM
[ 0.000999] 18830 reserved pages
[ 0.000999] 0 pages shared
[ 0.000999] 0 pages swap cached
[ 0.000999] 0 pages dirty
[ 0.000999] 0 pages writeback
[ 0.000999] 0 pages mapped
[ 0.000999] 0 pages slab
[ 0.000999] 0 pages pagetables
[ 0.000999] BUG: unable to handle kernel paging request at b0030b10
[ 0.000999] IP: [<c015d3a8>] __kmalloc+0x8f/0xd8
[ 0.000999] *pde = 00000000
[ 0.000999] Oops: 0000 [#1] SMP
[ 0.000999]
[ 0.000999] Pid: 0, comm: swapper Not tainted (2.6.25-rc9 #968)
[ 0.000999] EIP: 0060:[<c015d3a8>] EFLAGS: 00010082 CPU: 0
[ 0.000999] EIP is at __kmalloc+0x8f/0xd8
[ 0.000999] EAX: f0009bd0 EBX: 00000000 ECX: c0b12258 EDX: f0009bd0
[ 0.000999] ESI: c0b12258 EDI: f0009bd0 EBP: c0b1bf4c ESP: c0b1bf30
[ 0.000999] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[ 0.000999] Process swapper (pid: 0, ti=c0b1a000 task=c0a21300 task.ti=c0b1a000)
[ 0.000999] Stack: f0009bd0 000000d0 00000240 00000286 00000000 000000d0 c0b12258 c0b1bf60
[ 0.000999] c015dbc0 00000000 000000d0 c0b12258 c0b1bf8c c015dcb7 00000026 c09421eb
[ 0.000999] c0b12258 000000d0 c0b1bf8c 00038000 20000000 c0b12258 00000060 c0b1bfb4
[ 0.000999] Call Trace:
[ 0.000999] [<c015dbc0>] ? alloc_kmem_cache_cpu+0x3a/0x6a
[ 0.000999] [<c015dcb7>] ? kmem_cache_open+0xc7/0x128
[ 0.000999] [<c015dd59>] ? create_kmalloc_cache+0x41/0x90
[ 0.000999] [<c0b34165>] ? kmem_cache_init+0x4e/0x123
[ 0.000999] [<c0b23b55>] ? start_kernel+0x29e/0x323
[ 0.000999] =======================
[ 0.000999] Code: b8 c0 8b 5c 86 78 8b 3b 89 7d e4 85 ff 75 16 53 52 83 c9 ff 8b 55 e8 89 f0 e8 f8 ed ff ff 89 45 e4 58 5a eb 0e 8b 43 0c 8b 55 e4 <8b> 04 82 89 03 ff 43 14 8b 45 f0 51 52 ff 15 c8 3e a2 c0 5a 59
[ 0.000999] EIP: [<c015d3a8>] __kmalloc+0x8f/0xd8 SS:ESP 0068:c0b1bf30
[ 0.000999] ---[ end trace ca143223eefdc828 ]---
[ 0.000999] Kernel panic - not syncing: Attempted to kill the idle task!
[ 0.000999] Rebooting in 10 seconds..
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/