Re: PIIX4 DMA Timeout

[Maciej W. Rozycki]

On Tue, 20 May 2008, Gavin Shan wrote:

> There has one MV64460 on my board, which includes 2 PCI bridges. PIIX4 is on slot 3 of PCI1.
> But now, IDE driver reported it's timeouted on DMA operation. Thanks in advance for your
> suggestions.
[...]
> PIIX4: chipset revision 1
> PIIX4: not 100% native mode: will probe irqs later
>     ide0: BM-DMA at 0xd8000000-0xd8000007, BIOS settings: hda:pio, hdb:pio
>     ide1: BM-DMA at 0xd8000008-0xd800000f, BIOS settings: hdc:pio, hdd:pio
> hdc: HTE721010G9AT00, ATA DISK drive
> hdc: max request size: 512KiB
> hdc: 195371568 sectors (100030 MB) w/7539KiB Cache, CHS=16383/255/63, UDMA(33)
> hdc: cache flushes supported
>  hdc:<4>hdc: dma_timer_expiry: dma status == 0x26
> hdc: DMA interrupt recovery
> hdc: lost interrupt
> hdc: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest }
> ide: failed opcode was: unknown
> hdc: DMA disabled
> ide1: reset: success
>  hdc2 hdc3 hdc4

 It looks like some problem with interrupt routing.  At least with some of
the PIIX chips I recall there was some limitation about how the IDE
interrupts had to be used for DMA to be operational.  For PIO modes there
were no restrictions.  Do you have chip-level documentation for your
board?

  Maciej
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/