Re: Redzone overwritten with CONFIG_SECURITY

[Eric Sesterhenn]

* Chris Wright (chrisw@xxxxxxxxxxxx) wrote:
> * Pekka Enberg (penberg@xxxxxxxxxxxxxx) wrote:
> > On Mon, May 26, 2008 at 5:34 PM, Eric Sesterhenn <snakebyte@xxxxxx> wrote:
> > > i enabled CONFIG_SECURITY on current git and get tons of
> > > Redzone overwritten errors during early boot, even
> > > with CONFIG_SECURITY_CAPABILITIES and CONFIG_SECURITY_NETWORK
> > > disabled. After a while it ends with a kernel panic
> > > saying: not syncing: Out of memory and no killable process...
> > > Root partition is ext3 format.
> > 
> > So what kernel version is this and what's the last known version that
> > worked? As it's early boot crash, maybe you can try to do git bisect
> > on it?
> > 
> > >
> > > At the moment i dont have a camera at hand, so i'll try
> > > to write down everything which looks interesting, please tell
> > > me if i missed something.
> > >
> > > The first 24 Bytes of the overwritten section contain
> > > zeros. Then we have a constant 0x18, and three changing
> > > values. the next three bites contain exactly the same
> > > values, first the 0x18, then the two changing ones.
> > >
> > > The only value i found so far matching the 0x18 and
> > > which might be related to CONFIG_SECURITY is CAP_SYS_RESOURCE
> > > defined in /include/linux/capability.h
> > >
> > > BUG hugetlbfs_inode_cache: Redzone overwritten
> > >
> > > INFO: 0xccd8e250-0xccd8e253. First byte 0x0 instead of 0xbb
> > > Info: Slab 0xc119d1c0 objects=12 used=0 fs=0xccd8e000 flags=0x400020c3
> > > Info: Object 0xccd8e00 offset=0 fp=0xccd8e280
> > >
> > > Object 0xccd8e00: 00 00 00 ...
> > > Object 0xccd8e10: 00 00 00 00 00 00 00 00 00 18 e0 d8 cc 18 e0 d8 cc
> > > Object 0xccd8e20  00 00 00 ...
> 
> That looks like an addr within the object, like an INIT_LIST_HEAD.
> 
> > > Pid: 1, comm:swapper Not tainted 2.6.26-rc3-00436-gb373303 #42
> > > print_trailer
> > > check_bytes_and_report
> > > check_object
> > > __slab_alloc
> > > kmem_cache_alloc
> > > ? hugetlbfs_alloc_inode
> > > ? hugetlbfs_alloc_inode
> > > hugetlbfs_alloc_inode
> > > alloc_inote
> > > new_inode
> > > hugetlbs_get_inote
> > > hugetlbfs_fill_super
> > > ? sget
> > > ? set_anon_super
> > > get_sb_node
> > > hugetlbfs_get_sb
> > > ? hugetlbfs_fill_super
> > > vfs_kern_mount
> > > kern_mount_data
> > > init_hugetlbfs_fs
> > > ? init_once
> > > ? kernel_init
> > > kernel_init
> 
> ok, do_init_calls time frame with that config...CONFIG_SECURITY isn't
> really doing any allocations, nor much in the way of memory writes.
> It would get called into via the:
> 
>  hugetlbs_get_inode
>    new_inode
>      alloc_inode
>        security_inode_alloc <-- and that'd be basically a no-op
> 
> > > Config follows:
> 
> I couldn't recreate with that config.

I did a fresh git-clone and tried again without being able
to reproduce this.
I diffed all .h and .c files and except for
the autogenerated ones they are exactly the same...

Is it possible that this was caused because a file didnt
get rebuild correctly? I can still reproduce it with the
old checkout. Sorry if this causes unessecary noise :(

Greetings, Eric
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/