Re: [patch 04/41] cpu ops: Core piece for generic atomic per cpuoperations

[Andrew Morton]

On Thu, 29 May 2008 20:56:24 -0700 Christoph Lameter <clameter@xxxxxxx> wrote:

> Currently the per cpu subsystem is not able to use the atomic capabilities
> that are provided by many of the available processors.
> 
> This patch adds new functionality that allows the optimizing of per cpu
> variable handling. In particular it provides a simple way to exploit
> atomic operations in order to avoid having to disable interrupts or
> performing address calculation to access per cpu data.
> 
> F.e. Using our current methods we may do
> 
> 	unsigned long flags;
> 	struct stat_struct *p;
> 
> 	local_irq_save(flags);
> 	/* Calculate address of per processor area */
> 	p = CPU_PTR(stat, smp_processor_id());
> 	p->counter++;
> 	local_irq_restore(flags);

eh?  That's what local_t is for?

> The segment can be replaced by a single atomic CPU operation:
> 
> 	CPU_INC(stat->counter);

hm, I guess this _has_ to be implemented as a macro.  ho hum.  But
please: "cpu_inc"?

> Most processors have instructions to perform the increment using a
> a single atomic instruction. Processors may have segment registers,
> global registers or per cpu mappings of per cpu areas that can be used
> to generate atomic instructions that combine the following in a single
> operation:
> 
> 1. Adding of an offset / register to a base address
> 2. Read modify write operation on the address calculated by
>    the instruction.
> 
> If 1+2 are combined in an instruction then the instruction is atomic
> vs interrupts. This means that percpu atomic operations do not need
> to disable interrupts to increments counters etc.
> 
> The existing methods in use in the kernel cannot utilize the power of
> these atomic instructions. local_t is not really addressing the issue
> since the offset calculation performed before the atomic operation. The
> operation is therefor not atomic. Disabling interrupt or preemption is
> required in order to use local_t.

Your terminology is totally confusing here.

To me, an "atomic operation" is one which is atomic wrt other CPUs:
atomic_t, for example.

Here we're talking about atomic-wrt-this-cpu-only, yes?

If so, we should invent a new term for that different concept and stick
to it like glue.  How about "self-atomic"?  Or "locally-atomic" in
deference to the existing local_t?

> local_t is also very specific to the x86 processor.

And alpha, m32r, mips and powerpc, methinks.  Probably others, but
people just haven't got around to it.

> The solution here can
> utilize other methods than just those provided by the x86 instruction set.
> 
> 
> 
> On x86 the above CPU_INC translated into a single instruction:
> 
> 	inc %%gs:(&stat->counter)
> 
> This instruction is interrupt safe since it can either be completed
> or not. Both adding of the offset and the read modify write are combined
> in one instruction.
> 
> The determination of the correct per cpu area for the current processor
> does not require access to smp_processor_id() (expensive...). The gs
> register is used to provide a processor specific offset to the respective
> per cpu area where the per cpu variable resides.
> 
> Note that the counter offset into the struct was added *before* the segment
> selector was added. This is necessary to avoid calculations.  In the past
> we first determine the address of the stats structure on the respective
> processor and then added the field offset. However, the offset may as
> well be added earlier. The adding of the per cpu offset (here through the
> gs register) must be done by the instruction used for atomic per cpu
> access.
> 
> 
> 
> If "stat" was declared via DECLARE_PER_CPU then this patchset is capable of
> convincing the linker to provide the proper base address. In that case
> no calculations are necessary.
> 
> Should the stat structure be reachable via a register then the address
> calculation capabilities can be leveraged to avoid calculations.
> 
> On IA64 we can get the same combination of operations in a single instruction
> by using the virtual address that always maps to the local per cpu area:
> 
> 	fetchadd &stat->counter + (VCPU_BASE - __per_cpu_start)
> 
> The access is forced into the per cpu address reachable via the virtualized
> address. IA64 allows the embedding of an offset into the instruction. So the
> fetchadd can perform both the relocation of the pointer into the per cpu
> area as well as the atomic read modify write cycle.
> 
> 
> 
> In order to be able to exploit the atomicity of these instructions we
> introduce a series of new functions that take either:
> 
> 1. A per cpu pointer as returned by cpu_alloc() or CPU_ALLOC().
> 
> 2. A per cpu variable address as returned by per_cpu_var(<percpuvarname>).
> 
> CPU_READ()
> CPU_WRITE()
> CPU_INC
> CPU_DEC
> CPU_ADD
> CPU_SUB
> CPU_XCHG
> CPU_CMPXCHG
> 

I think I'll need to come back another time to understand all that ;)

Thanks for writing it up carefully.

> 
> ---
>  include/linux/percpu.h |  135 +++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 135 insertions(+)
> 
> Index: linux-2.6/include/linux/percpu.h
> ===================================================================
> --- linux-2.6.orig/include/linux/percpu.h	2008-05-28 22:31:43.000000000 -0700
> +++ linux-2.6/include/linux/percpu.h	2008-05-28 23:38:17.000000000 -0700

I wonder if all this stuff should be in a new header file.

We could get lazy and include that header from percpu.h if needed.

> @@ -179,4 +179,139 @@
>  void *cpu_alloc(unsigned long size, gfp_t flags, unsigned long align);
>  void cpu_free(void *cpu_pointer, unsigned long size);
>  
> +/*
> + * Fast atomic per cpu operations.
> + *
> + * The following operations can be overridden by arches to implement fast
> + * and efficient operations. The operations are atomic meaning that the
> + * determination of the processor, the calculation of the address and the
> + * operation on the data is an atomic operation.
> + *
> + * The parameter passed to the atomic per cpu operations is an lvalue not a
> + * pointer to the object.
> + */
> +#ifndef CONFIG_HAVE_CPU_OPS

If you move this functionality into a new cpu_alloc.h then the below
code goes into include/asm-generic/cpu_alloc.h and most architectures'
include/asm/cpu_alloc.h will include asm-generic/cpu_alloc.h.

include/linux/percpu.h can still include linux/cpu_alloc.h (which
includes asm/cpu_alloc.h) if needed.  But it would be better to just
teach the .c files to include <linux/cpu_alloc.h>

> +/*
> + * Fallback in case the arch does not provide for atomic per cpu operations.
> + *
> + * The first group of macros is used when it is safe to update the per
> + * cpu variable because preemption is off (per cpu variables that are not
> + * updated from interrupt context) or because interrupts are already off.
> + */
> +#define __CPU_READ(var)				\
> +({						\
> +	(*THIS_CPU(&(var)));			\
> +})
> +
> +#define __CPU_WRITE(var, value)			\
> +({						\
> +	*THIS_CPU(&(var)) = (value);		\
> +})
> +
> +#define __CPU_ADD(var, value)			\
> +({						\
> +	*THIS_CPU(&(var)) += (value);		\
> +})
> +
> +#define __CPU_INC(var) __CPU_ADD((var), 1)
> +#define __CPU_DEC(var) __CPU_ADD((var), -1)
> +#define __CPU_SUB(var, value) __CPU_ADD((var), -(value))
> +
> +#define __CPU_CMPXCHG(var, old, new)		\
> +({						\
> +	typeof(obj) x;				\
> +	typeof(obj) *p = THIS_CPU(&(obj));	\
> +	x = *p;					\
> +	if (x == (old))				\
> +		*p = (new);			\
> +	(x);					\
> +})
> +
> +#define __CPU_XCHG(obj, new)			\
> +({						\
> +	typeof(obj) x;				\
> +	typeof(obj) *p = THIS_CPU(&(obj));	\
> +	x = *p;					\
> +	*p = (new);				\
> +	(x);					\
> +})
> +
> +/*
> + * Second group used for per cpu variables that are not updated from an
> + * interrupt context. In that case we can simply disable preemption which
> + * may be free if the kernel is compiled without support for preemption.
> + */
> +#define _CPU_READ __CPU_READ
> +#define _CPU_WRITE __CPU_WRITE
> +
> +#define _CPU_ADD(var, value)			\
> +({						\
> +	preempt_disable();			\
> +	__CPU_ADD((var), (value));		\
> +	preempt_enable();			\
> +})
> +
> +#define _CPU_INC(var) _CPU_ADD((var), 1)
> +#define _CPU_DEC(var) _CPU_ADD((var), -1)
> +#define _CPU_SUB(var, value) _CPU_ADD((var), -(value))
> +
> +#define _CPU_CMPXCHG(var, old, new)		\
> +({						\
> +	typeof(addr) x;				\
> +	preempt_disable();			\
> +	x = __CPU_CMPXCHG((var), (old), (new));	\
> +	preempt_enable();			\
> +	(x);					\
> +})
> +
> +#define _CPU_XCHG(var, new)			\
> +({						\
> +	typeof(var) x;				\
> +	preempt_disable();			\
> +	x = __CPU_XCHG((var), (new));		\
> +	preempt_enable();			\
> +	(x);					\
> +})
> +
> +/*
> + * Third group: Interrupt safe CPU functions
> + */
> +#define CPU_READ __CPU_READ
> +#define CPU_WRITE __CPU_WRITE
> +
> +#define CPU_ADD(var, value)			\
> +({						\
> +	unsigned long flags;			\
> +	local_irq_save(flags);			\
> +	__CPU_ADD((var), (value));		\
> +	local_irq_restore(flags);		\
> +})
> +
> +#define CPU_INC(var) CPU_ADD((var), 1)
> +#define CPU_DEC(var) CPU_ADD((var), -1)
> +#define CPU_SUB(var, value) CPU_ADD((var), -(value))
> +
> +#define CPU_CMPXCHG(var, old, new)		\
> +({						\
> +	unsigned long flags;			\
> +	typeof(var) x;				\
> +	local_irq_save(flags);			\
> +	x = __CPU_CMPXCHG((var), (old), (new));	\
> +	local_irq_restore(flags);		\
> +	(x);					\
> +})
> +
> +#define CPU_XCHG(var, new)			\
> +({						\
> +	unsigned long flags;			\
> +	typeof(var) x;				\
> +	local_irq_save(flags);			\
> +	x = __CPU_XCHG((var), (new));		\
> +	local_irq_restore(flags);		\
> +	(x);					\
> +})
> +
> +#endif /* CONFIG_HAVE_CPU_OPS */
> +
>  #endif /* __LINUX_PERCPU_H */

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/