Re: 2,6.26-rc4-git2 - long pause during boot

From: Chris Clayton
Date: Sat Jun 07 2008 - 01:20:20 EST

Next message: Roland Dreier: "[PATCH] IB/umem: Avoid sign problems when demoting npages to integer"
Previous message: Andrey Panin: "Re: [PATCH] Add backlight driver for Nvidia-based Apple MacbookPros"
In reply to: James Bottomley: "Re: 2,6.26-rc4-git2 - long pause during boot"
Next in thread: James Bottomley: "Re: 2,6.26-rc4-git2 - long pause during boot"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Friday 06 June 2008, James Bottomley wrote:
> On Fri, 2008-06-06 at 11:03 -0700, Andrew Morton wrote:
> > On Fri, 06 Jun 2008 10:22:22 -0500 James Bottomley
<James.Bottomley@xxxxxxxxxxxxxxxxxxxxx> wrote:
> > > On Thu, 2008-06-05 at 23:25 -0700, Andrew Morton wrote:
> > > > On Thu, 5 Jun 2008 23:21:45 -0700 Andrew Morton
<akpm@xxxxxxxxxxxxxxxxxxxx> wrote:
> > > > > <watches wodim wibble for five minutes then report "CD/DVD-Recorder
> > > > > not ready." Pretends not to have noticed.>
> > > >
> > > > It goes much better when the CD is inserted upside up.
> > >
> > > So I can close this regression if I send you a pack of CD ring labels
> > > with "other way up" on them for you to affix to the underside of your
> > > CDs ... ?
> >
> > Would prefer double-sided CDs.
>
> I just discovered my budget only runs to a permanent marker for you to
> write the instructions on the rim yourself ...
>
> > Is this 20-second-delay thing known-about/expected/etc?
>
> If it's not the scsi_bus_uevent problem, then no, it isn't.
>
> The odd thing is that it occurs in the middle of USB initialisation from
>
> the log:
> > ïJun 6 17:25:19 upstairs kernel: uhci_hcd 0000:00:1d.0: UHCI Host
> > Controller Jun 6 17:25:19 upstairs kernel: uhci_hcd 0000:00:1d.0: new
> > USB bus registered, assigned bus number 1 Jun 6 17:25:19 upstairs
> > kernel: uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000a800 Jun 6 17:25:19
> > upstairs kernel: usb usb1: configuration #1 chosen from 1 choice Jun 6
> > 17:25:19 upstairs kernel: hub 1-0:1.0: USB hub found
> > Jun 6 17:25:19 upstairs kernel: hub 1-0:1.0: 2 ports detected
> > Jun 6 17:25:44 upstairs kernel: ohci_hcd: 2006 August 04 USB 1.1 'Open'
> > Host Controller (OHCI) Driver Jun 6 17:25:44 upstairs kernel: usb usb1:
> > New USB device found, idVendor=1d6b, idProduct=0001 Jun 6 17:25:44
> > upstairs kernel: usb usb1: New USB device strings: Mfr=3, Product=2,
> > SerialNumber=1 Jun 6 17:25:44 upstairs kernel: usb usb1: Product: UHCI
> > Host Controller Jun 6 17:25:44 upstairs kernel: usb usb1: Manufacturer:
> > Linux 2.6.26-rc5 uhci_hcd
>
> Note the jump from 19 to 44 seconds.
>
> There's another one here:
> > ïJun 6 17:25:44 upstairs kernel: EXT3-fs: mounted filesystem with
> > ordered data mode. Jun 6 17:25:44 upstairs kernel: Adding 4096532k swap
> > on /dev/sda5. Priority:-1 extents:1 across:4096532k Jun 6 17:25:44
> > upstairs kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 Jun 6
> > 17:25:44 upstairs kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
> > Jun 6 17:25:44 upstairs kernel: nf_conntrack version 0.5.0 (16384
> > buckets, 65536 max) Jun 6 17:25:44 upstairs kernel: parport_pc 00:06:
> > disabled
> > Jun 6 17:25:44 upstairs kernel: pnp: the driver 'parport_pc' has been
> > unregistered Jun 6 17:25:44 upstairs kernel: ieee1394: Node removed:
> > ID:BUS[0-00:1023] GUID[00110666000013cc] Jun 6 17:26:31 upstairs
> > kernel: usb 11-2: new high speed USB device using ehci_hcd and address 3
> > Jun 6 17:26:31 upstairs kernel: usb 11-2: configuration #1 chosen from 1
> > choice Jun 6 17:26:31 upstairs kernel: usb 11-2: New USB device found,
> > idVendor=0930, idProduct=6545 Jun 6 17:26:31 upstairs kernel: usb 11-2:
> > New USB device strings: Mfr=0, Product=2, SerialNumber=3 Jun 6 17:26:31
> > upstairs kernel: usb 11-2: Product: USB Flash Memory Jun 6 17:26:31
> > upstairs kernel: usb 11-2: SerialNumber: 0EC065712361A91E
>
> I'm a bit baffled as to how that could be SCSI related, but I suppose it
> could be udev related somehow. Perhaps turning on driver core debugging
> might help (that's CONFIG_DEBUG DRIVER ... it depends on
> CONFIG_DEBUG_KERNEL for activation). Hopefully the verbose kernel logs
> from here might tell us what's going on in the lacunae.
>

OK, here's a boot log with driver core debugging turned on. Hope it helps!

(Oh, and thanks for adding the word lacunae to my vocabulary. I'd never come
across it before.)

Chris

> James

--
Beauty is in the eye of the beerholder.
Jun 7 04:51:03 upstairs kernel: klogd 1.3-3, log source = /proc/kmsg started.
Jun 7 04:51:03 upstairs kernel: Inspecting /boot/System.map-2.6.26-rc5
Jun 7 04:51:04 upstairs kernel: Loaded 26357 symbols from /boot/System.map-2.6.26-rc5.
Jun 7 04:51:04 upstairs kernel: Symbols match kernel version 2.6.26.
Jun 7 04:51:04 upstairs kernel: No module symbols loaded - kernel modules not enabled.
Jun 7 04:51:04 upstairs kernel: evice, IDs PNP0c04 (active)
Jun 7 04:51:04 upstairs kernel: pnp 00:05: parse allocated resources
Jun 7 04:51:04 upstairs kernel: pnp 00:05: add irq 6 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:05: add dma 2 flags 0x0
Jun 7 04:51:04 upstairs kernel: pnp 00:05: add io 0x3f0-0x3f5 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:05: add io 0x3f7-0x3f7 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:05: parse resource options
Jun 7 04:51:04 upstairs kernel: pnp 00:05: new independent option
Jun 7 04:51:04 upstairs kernel: pnp 00:05: new dependent option (priority 0x0)
Jun 7 04:51:04 upstairs kernel: pnp 00:05: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000040 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:05: dma bitmask 0x4 flags 0x0
Jun 7 04:51:04 upstairs kernel: pnp 00:05: io min 0x3f0 max 0x3f0 align 1 size 6 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:05: io min 0x3f7 max 0x3f7 align 1 size 1 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:05: new dependent option (priority 0x1)
Jun 7 04:51:04 upstairs kernel: pnp 00:05: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:05: dma bitmask 0xe flags 0x0
Jun 7 04:51:04 upstairs kernel: pnp 00:05: io min 0x3f0 max 0x3f0 align 1 size 6 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:05: io min 0x3f7 max 0x3f7 align 1 size 1 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:05: new dependent option (priority 0x1)
Jun 7 04:51:04 upstairs kernel: pnp 00:05: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:05: dma bitmask 0xe flags 0x0
Jun 7 04:51:04 upstairs kernel: pnp 00:05: io min 0x370 max 0x370 align 1 size 6 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:05: io min 0x377 max 0x377 align 1 size 1 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:05: end dependent options
Jun 7 04:51:04 upstairs kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
Jun 7 04:51:04 upstairs kernel: pnp 00:06: parse allocated resources
Jun 7 04:51:04 upstairs kernel: pnp 00:06: add io 0x378-0x37f flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:06: add io 0x778-0x77b flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:06: add irq 7 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:06: add dma 3 flags 0x0
Jun 7 04:51:04 upstairs kernel: pnp 00:06: parse resource options
Jun 7 04:51:04 upstairs kernel: pnp 00:06: new independent option
Jun 7 04:51:04 upstairs kernel: pnp 00:06: new dependent option (priority 0x0)
Jun 7 04:51:04 upstairs kernel: pnp 00:06: io min 0x378 max 0x378 align 1 size 8 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:06: io min 0x778 max 0x778 align 1 size 4 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:06: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000080 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:06: dma bitmask 0x8 flags 0x0
Jun 7 04:51:04 upstairs kernel: pnp 00:06: new dependent option (priority 0x1)
Jun 7 04:51:04 upstairs kernel: pnp 00:06: io min 0x378 max 0x378 align 1 size 8 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:06: io min 0x778 max 0x778 align 1 size 4 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:06: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:06: dma bitmask 0xb flags 0x0
Jun 7 04:51:04 upstairs kernel: pnp 00:06: new dependent option (priority 0x1)
Jun 7 04:51:04 upstairs kernel: pnp 00:06: io min 0x278 max 0x278 align 1 size 8 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:06: io min 0x678 max 0x678 align 1 size 4 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:06: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:06: dma bitmask 0xb flags 0x0
Jun 7 04:51:04 upstairs kernel: pnp 00:06: new dependent option (priority 0x1)
Jun 7 04:51:04 upstairs kernel: pnp 00:06: io min 0x3bc max 0x3bc align 1 size 4 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:06: io min 0x7bc max 0x7bc align 1 size 4 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:06: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:06: dma bitmask 0xb flags 0x0
Jun 7 04:51:04 upstairs kernel: pnp 00:06: end dependent options
Jun 7 04:51:04 upstairs kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
Jun 7 04:51:04 upstairs kernel: pnp 00:07: parse allocated resources
Jun 7 04:51:04 upstairs kernel: pnp 00:07: add io 0x0-0xffffffff flags 0x10000001
Jun 7 04:51:04 upstairs kernel: pnp 00:07: add io 0x0-0xffffffff flags 0x10000001
Jun 7 04:51:04 upstairs kernel: pnp 00:07: add io 0x290-0x297 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:07: PNP0c02: calling quirk_system_pci_resources+0x0/0x1c1
Jun 7 04:51:04 upstairs kernel: pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
Jun 7 04:51:04 upstairs kernel: pnp 00:08: parse allocated resources
Jun 7 04:51:04 upstairs kernel: pnp 00:08: add io 0x10-0x1f flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:08: add io 0x22-0x3f flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:08: add io 0x44-0x5f flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:08: add io 0x62-0x63 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:08: add io 0x65-0x6f flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:08: add io 0x72-0x7f flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:08: add io 0x80-0x80 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:08: add io 0x84-0x86 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:08: add io 0x88-0x88 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:08: add io 0x8c-0x8e flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:08: add io 0x90-0x9f flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:08: add io 0xa2-0xbf flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:08: add io 0xe0-0xef flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:08: add io 0x4d0-0x4d1 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:08: add io 0x800-0x87f flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:08: add io 0x400-0x41f flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:08: add io 0x480-0x4bf flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:08: add mem 0xfed20000-0xfed8ffff flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:08: add mem 0xffb00000-0xffbfffff flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:08: PNP0c02: calling quirk_system_pci_resources+0x0/0x1c1
Jun 7 04:51:04 upstairs kernel: pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
Jun 7 04:51:04 upstairs kernel: pnp 00:09: parse allocated resources
Jun 7 04:51:04 upstairs kernel: pnp 00:09: add mem 0xfec00000-0xfec00fff flags 0x0
Jun 7 04:51:04 upstairs kernel: pnp 00:09: add mem 0xfee00000-0xfee00fff flags 0x0
Jun 7 04:51:04 upstairs kernel: pnp 00:09: PNP0c02: calling quirk_system_pci_resources+0x0/0x1c1
Jun 7 04:51:04 upstairs kernel: pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
Jun 7 04:51:04 upstairs kernel: pnp 00:0a: parse allocated resources
Jun 7 04:51:04 upstairs kernel: pnp 00:0a: add io 0x60-0x60 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:0a: add io 0x64-0x64 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:0a: add irq 1 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
Jun 7 04:51:04 upstairs kernel: pnp 00:0b: parse allocated resources
Jun 7 04:51:04 upstairs kernel: pnp 00:0b: add io 0x3f8-0x3ff flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:0b: add irq 4 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:0b: parse resource options
Jun 7 04:51:04 upstairs kernel: pnp 00:0b: new independent option
Jun 7 04:51:04 upstairs kernel: pnp 00:0b: new dependent option (priority 0x0)
Jun 7 04:51:04 upstairs kernel: pnp 00:0b: io min 0x3f8 max 0x3f8 align 4 size 8 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:0b: new dependent option (priority 0x1)
Jun 7 04:51:04 upstairs kernel: pnp 00:0b: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:0b: new dependent option (priority 0x1)
Jun 7 04:51:04 upstairs kernel: pnp 00:0b: io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:0b: new dependent option (priority 0x1)
Jun 7 04:51:04 upstairs kernel: pnp 00:0b: io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:0b: new dependent option (priority 0x1)
Jun 7 04:51:04 upstairs kernel: pnp 00:0b: io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:0b: end dependent options
Jun 7 04:51:04 upstairs kernel: pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
Jun 7 04:51:04 upstairs kernel: pnp 00:0c: parse allocated resources
Jun 7 04:51:04 upstairs kernel: pnp 00:0c: add mem 0x0-0x9ffff flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:0c: add mem 0xc0000-0xdffff flags 0x0
Jun 7 04:51:04 upstairs kernel: pnp 00:0c: add mem 0xe0000-0xfffff flags 0x0
Jun 7 04:51:04 upstairs kernel: pnp 00:0c: add mem 0x100000-0x7ffeffff flags 0x1
Jun 7 04:51:04 upstairs kernel: pnp 00:0c: add mem 0xfff00000-0xffffffff flags 0x0
Jun 7 04:51:04 upstairs kernel: pnp 00:0c: PNP0c01: calling quirk_system_pci_resources+0x0/0x1c1
Jun 7 04:51:04 upstairs kernel: pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
Jun 7 04:51:04 upstairs kernel: pnp: PnP ACPI: found 13 devices
Jun 7 04:51:04 upstairs kernel: ACPI: ACPI bus type pnp unregistered
Jun 7 04:51:04 upstairs kernel: SCSI subsystem initialized
Jun 7 04:51:04 upstairs kernel: libata version 3.00 loaded.
Jun 7 04:51:04 upstairs kernel: usbcore: registered new interface driver usbfs
Jun 7 04:51:04 upstairs kernel: usbcore: registered new interface driver hub
Jun 7 04:51:04 upstairs kernel: usbcore: registered new device driver usb
Jun 7 04:51:04 upstairs kernel: PCI: Using ACPI for IRQ routing
Jun 7 04:51:04 upstairs kernel: pnp: the driver 'system' has been registered
Jun 7 04:51:04 upstairs kernel: system 00:07: ioport range 0x290-0x297 has been reserved
Jun 7 04:51:04 upstairs kernel: system 00:07: iomem range 0x0-0x0 could not be reserved
Jun 7 04:51:04 upstairs last message repeated 23 times
Jun 7 04:51:04 upstairs kernel: system 00:07: driver attached
Jun 7 04:51:04 upstairs kernel: system 00:08: ioport range 0x4d0-0x4d1 has been reserved
Jun 7 04:51:04 upstairs kernel: system 00:08: ioport range 0x800-0x87f has been reserved
Jun 7 04:51:04 upstairs kernel: system 00:08: ioport range 0x400-0x41f has been reserved
Jun 7 04:51:04 upstairs kernel: system 00:08: ioport range 0x480-0x4bf has been reserved
Jun 7 04:51:04 upstairs kernel: system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
Jun 7 04:51:04 upstairs kernel: system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
Jun 7 04:51:04 upstairs kernel: system 00:08: iomem range 0x0-0x0 could not be reserved
Jun 7 04:51:04 upstairs last message repeated 21 times
Jun 7 04:51:04 upstairs kernel: system 00:08: driver attached
Jun 7 04:51:04 upstairs kernel: system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
Jun 7 04:51:04 upstairs kernel: system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
Jun 7 04:51:04 upstairs kernel: system 00:09: iomem range 0x0-0x0 could not be reserved
Jun 7 04:51:04 upstairs last message repeated 21 times
Jun 7 04:51:04 upstairs kernel: system 00:09: driver attached
Jun 7 04:51:04 upstairs kernel: system 00:0c: iomem range 0x0-0x9ffff could not be reserved
Jun 7 04:51:04 upstairs kernel: system 00:0c: iomem range 0xc0000-0xdffff could not be reserved
Jun 7 04:51:04 upstairs kernel: system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
Jun 7 04:51:04 upstairs kernel: system 00:0c: iomem range 0x100000-0x7ffeffff could not be reserved
Jun 7 04:51:04 upstairs kernel: system 00:0c: iomem range 0xfff00000-0xffffffff could not be reserved
Jun 7 04:51:04 upstairs kernel: system 00:0c: iomem range 0x0-0x0 could not be reserved
Jun 7 04:51:04 upstairs last message repeated 18 times
Jun 7 04:51:04 upstairs kernel: system 00:0c: driver attached
Jun 7 04:51:04 upstairs kernel: PCI: Bridge: 0000:00:01.0
Jun 7 04:51:04 upstairs kernel: IO window: c000-cfff
Jun 7 04:51:04 upstairs kernel: MEM window: 0xfa000000-0xfbefffff
Jun 7 04:51:04 upstairs kernel: PREFETCH window: 0x00000000f0000000-0x00000000f8ffffff
Jun 7 04:51:04 upstairs kernel: PCI: Bridge: 0000:00:1e.0
Jun 7 04:51:04 upstairs kernel: IO window: d000-efff
Jun 7 04:51:04 upstairs kernel: MEM window: 0xfbf00000-0xfbffffff
Jun 7 04:51:04 upstairs kernel: PREFETCH window: disabled.
Jun 7 04:51:04 upstairs kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64
Jun 7 04:51:04 upstairs kernel: NET: Registered protocol family 2
Jun 7 04:51:04 upstairs kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Jun 7 04:51:04 upstairs kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Jun 7 04:51:04 upstairs kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Jun 7 04:51:04 upstairs kernel: TCP: Hash tables configured (established 131072 bind 65536)
Jun 7 04:51:04 upstairs kernel: TCP reno registered
Jun 7 04:51:04 upstairs kernel: NET: Registered protocol family 1
Jun 7 04:51:04 upstairs kernel: highmem bounce pool size: 64 pages
Jun 7 04:51:04 upstairs kernel: msgmni has been set to 1750 for ipc namespace c03dea00
Jun 7 04:51:04 upstairs kernel: io scheduler noop registered
Jun 7 04:51:04 upstairs kernel: io scheduler cfq registered (default)
Jun 7 04:51:04 upstairs kernel: pci 0000:01:00.0: Boot video device
Jun 7 04:51:04 upstairs kernel: input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
Jun 7 04:51:04 upstairs kernel: ACPI: Power Button (FF) [PWRF]
Jun 7 04:51:04 upstairs kernel: input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
Jun 7 04:51:04 upstairs kernel: ACPI: Power Button (CM) [PWRB]
Jun 7 04:51:04 upstairs kernel: ACPI: ACPI0007:00 is registered as cooling_device0
Jun 7 04:51:04 upstairs kernel: ACPI: Processor [CPU1] (supports 8 throttling states)
Jun 7 04:51:04 upstairs kernel: ACPI: ACPI0007:01 is registered as cooling_device1
Jun 7 04:51:04 upstairs kernel: Real Time Clock Driver v1.12ac
Jun 7 04:51:04 upstairs kernel: Linux agpgart interface v0.103
Jun 7 04:51:04 upstairs kernel: agpgart: Detected an Intel 865 Chipset.
Jun 7 04:51:04 upstairs kernel: agpgart: AGP aperture is 64M @ 0xec000000
Jun 7 04:51:04 upstairs kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Jun 7 04:51:04 upstairs kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jun 7 04:51:04 upstairs kernel: pnp: the driver 'serial' has been registered
Jun 7 04:51:04 upstairs kernel: 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jun 7 04:51:04 upstairs kernel: serial 00:0b: driver attached
Jun 7 04:51:04 upstairs kernel: 8139too Fast Ethernet driver 0.9.28
Jun 7 04:51:04 upstairs kernel: ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 23 (level, low) -> IRQ 23
Jun 7 04:51:04 upstairs kernel: eth0: RealTek RTL8139 at 0xf8816c00, 00:17:31:a9:1d:48, IRQ 23
Jun 7 04:51:04 upstairs kernel: eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Jun 7 04:51:04 upstairs kernel: Driver 'sd' needs updating - please use bus_type methods
Jun 7 04:51:04 upstairs kernel: Driver 'sr' needs updating - please use bus_type methods
Jun 7 04:51:04 upstairs kernel: ata_piix 0000:00:1f.1: version 2.12
Jun 7 04:51:04 upstairs kernel: ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
Jun 7 04:51:04 upstairs kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
Jun 7 04:51:04 upstairs kernel: PCI: Setting latency timer of device 0000:00:1f.1 to 64
Jun 7 04:51:04 upstairs kernel: scsi0 : ata_piix
Jun 7 04:51:04 upstairs kernel: scsi1 : ata_piix
Jun 7 04:51:04 upstairs kernel: ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
Jun 7 04:51:04 upstairs kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
Jun 7 04:51:04 upstairs kernel: ata1.00: ATA-7: MAXTOR STM3250820A, 3.AAE, max UDMA/100
Jun 7 04:51:04 upstairs kernel: ata1.00: 488397168 sectors, multi 16: LBA48
Jun 7 04:51:04 upstairs kernel: ata1.01: ATA-7: Maxtor 6L160P0, BAJ41G20, max UDMA/133
Jun 7 04:51:04 upstairs kernel: ata1.01: 320173056 sectors, multi 16: LBA48
Jun 7 04:51:04 upstairs kernel: ata1.00: configured for UDMA/100
Jun 7 04:51:04 upstairs kernel: ata1.01: configured for UDMA/100
Jun 7 04:51:04 upstairs kernel: ata2.00: ATAPI: SONY DVD RW DW-G120A, MYS2, max UDMA/66
Jun 7 04:51:04 upstairs kernel: ata2.01: ATAPI: PHILIPS DVDR1628P1, Q2.2, max UDMA/33
Jun 7 04:51:04 upstairs kernel: Switched to NOHz mode on CPU #1
Jun 7 04:51:04 upstairs kernel: Switched to NOHz mode on CPU #0
Jun 7 04:51:04 upstairs kernel: ata2.00: configured for UDMA/66
Jun 7 04:51:04 upstairs kernel: ata2.01: configured for UDMA/33
Jun 7 04:51:04 upstairs kernel: scsi 0:0:0:0: Direct-Access ATA MAXTOR STM325082 3.AA PQ: 0 ANSI: 5
Jun 7 04:51:04 upstairs kernel: sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
Jun 7 04:51:04 upstairs kernel: sd 0:0:0:0: [sda] Write Protect is off
Jun 7 04:51:04 upstairs kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jun 7 04:51:04 upstairs kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 7 04:51:04 upstairs kernel: sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
Jun 7 04:51:04 upstairs kernel: sd 0:0:0:0: [sda] Write Protect is off
Jun 7 04:51:04 upstairs kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jun 7 04:51:04 upstairs kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 7 04:51:04 upstairs kernel: sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
Jun 7 04:51:04 upstairs kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Jun 7 04:51:04 upstairs kernel: scsi 0:0:1:0: Direct-Access ATA Maxtor 6L160P0 BAJ4 PQ: 0 ANSI: 5
Jun 7 04:51:04 upstairs kernel: sd 0:0:1:0: [sdb] 320173056 512-byte hardware sectors (163929 MB)
Jun 7 04:51:04 upstairs kernel: sd 0:0:1:0: [sdb] Write Protect is off
Jun 7 04:51:04 upstairs kernel: sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
Jun 7 04:51:04 upstairs kernel: sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 7 04:51:04 upstairs kernel: sd 0:0:1:0: [sdb] 320173056 512-byte hardware sectors (163929 MB)
Jun 7 04:51:04 upstairs kernel: sd 0:0:1:0: [sdb] Write Protect is off
Jun 7 04:51:04 upstairs kernel: sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
Jun 7 04:51:04 upstairs kernel: sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 7 04:51:04 upstairs kernel: sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 >
Jun 7 04:51:04 upstairs kernel: sdb2: <bsd: sdb9 sdb10 sdb11 sdb12 sdb13 >
Jun 7 04:51:04 upstairs kernel: sd 0:0:1:0: [sdb] Attached SCSI disk
Jun 7 04:51:04 upstairs kernel: scsi 1:0:0:0: CD-ROM SONY DVD RW DW-G120A MYS2 PQ: 0 ANSI: 5
Jun 7 04:51:04 upstairs kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Jun 7 04:51:04 upstairs kernel: Uniform CD-ROM driver Revision: 3.20
Jun 7 04:51:04 upstairs kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
Jun 7 04:51:04 upstairs kernel: scsi 1:0:1:0: CD-ROM PHILIPS DVDR1628P1 Q2.2 PQ: 0 ANSI: 5
Jun 7 04:51:04 upstairs kernel: sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Jun 7 04:51:04 upstairs kernel: sr 1:0:1:0: Attached scsi CD-ROM sr1
Jun 7 04:51:04 upstairs kernel: ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
Jun 7 04:51:04 upstairs kernel: ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
Jun 7 04:51:04 upstairs kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64
Jun 7 04:51:04 upstairs kernel: scsi2 : ata_piix
Jun 7 04:51:04 upstairs kernel: scsi3 : ata_piix
Jun 7 04:51:04 upstairs kernel: ata3: SATA max UDMA/133 cmd 0x9800 ctl 0x9400 bmdma 0x8400 irq 18
Jun 7 04:51:04 upstairs kernel: ata4: SATA max UDMA/133 cmd 0x9000 ctl 0x8800 bmdma 0x8408 irq 18
Jun 7 04:51:04 upstairs kernel: ata3.00: ATA-7: Hitachi HDS721616PLA380, P22OA70A, max UDMA/133
Jun 7 04:51:04 upstairs kernel: ata3.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32)
Jun 7 04:51:04 upstairs kernel: ata3.00: configured for UDMA/133
Jun 7 04:51:04 upstairs kernel: scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5
Jun 7 04:51:04 upstairs kernel: sd 2:0:0:0: [sdc] 321672960 512-byte hardware sectors (164697 MB)
Jun 7 04:51:04 upstairs kernel: sd 2:0:0:0: [sdc] Write Protect is off
Jun 7 04:51:04 upstairs kernel: sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Jun 7 04:51:04 upstairs kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 7 04:51:04 upstairs kernel: sd 2:0:0:0: [sdc] 321672960 512-byte hardware sectors (164697 MB)
Jun 7 04:51:04 upstairs kernel: sd 2:0:0:0: [sdc] Write Protect is off
Jun 7 04:51:04 upstairs kernel: sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Jun 7 04:51:04 upstairs kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 7 04:51:04 upstairs kernel: sdc: sdc1 sdc2
Jun 7 04:51:04 upstairs kernel: sd 2:0:0:0: [sdc] Attached SCSI disk
Jun 7 04:51:04 upstairs kernel: pnp: the driver 'i8042 kbd' has been registered
Jun 7 04:51:04 upstairs kernel: i8042 kbd 00:0a: driver attached
Jun 7 04:51:04 upstairs kernel: pnp: the driver 'i8042 aux' has been registered
Jun 7 04:51:04 upstairs kernel: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Jun 7 04:51:04 upstairs kernel: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Jun 7 04:51:04 upstairs kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jun 7 04:51:04 upstairs kernel: mice: PS/2 mouse device common for all mice
Jun 7 04:51:04 upstairs kernel: Advanced Linux Sound Architecture Driver Version 1.0.16.
Jun 7 04:51:04 upstairs kernel: ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
Jun 7 04:51:04 upstairs kernel: PCI: Setting latency timer of device 0000:00:1f.5 to 64
Jun 7 04:51:34 upstairs kernel: intel8x0_measure_ac97_clock: measured 50842 usecs
Jun 7 04:51:34 upstairs kernel: intel8x0: clocking to 48000
Jun 7 04:51:34 upstairs kernel: ALSA device list:
Jun 7 04:51:34 upstairs kernel: #0: Intel ICH5 with ALC655 at irq 17
Jun 7 04:51:34 upstairs kernel: TCP cubic registered
Jun 7 04:51:34 upstairs kernel: NET: Registered protocol family 15
Jun 7 04:51:34 upstairs kernel: p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
Jun 7 04:51:34 upstairs kernel: Starting balanced_irq
Jun 7 04:51:34 upstairs kernel: Using IPI No-Shortcut mode
Jun 7 04:51:34 upstairs kernel: kjournald starting. Commit interval 5 seconds
Jun 7 04:51:34 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun 7 04:51:34 upstairs kernel: VFS: Mounted root (ext3 filesystem) readonly.
Jun 7 04:51:34 upstairs kernel: Freeing unused kernel memory: 200k freed
Jun 7 04:51:34 upstairs kernel: EXT3 FS on sdc1, internal journal
Jun 7 04:51:34 upstairs kernel: ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
Jun 7 04:51:34 upstairs kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64
Jun 7 04:51:34 upstairs kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Jun 7 04:51:34 upstairs kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Jun 7 04:51:34 upstairs kernel: ehci_hcd 0000:00:1d.7: debug port 1
Jun 7 04:51:34 upstairs kernel: PCI: cache line size of 128 is not supported by device 0000:00:1d.7
Jun 7 04:51:34 upstairs kernel: ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fffc00
Jun 7 04:51:34 upstairs kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jun 7 04:51:34 upstairs kernel: usb usb1: configuration #1 chosen from 1 choice
Jun 7 04:51:34 upstairs kernel: hub 1-0:1.0: USB hub found
Jun 7 04:51:34 upstairs kernel: hub 1-0:1.0: 8 ports detected
Jun 7 04:51:34 upstairs kernel: ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Jun 7 04:51:34 upstairs kernel: USB Universal Host Controller Interface driver v3.0
Jun 7 04:51:34 upstairs kernel: pnp: the driver 'parport_pc' has been registered
Jun 7 04:51:34 upstairs kernel: parport_pc 00:06: reported by Plug and Play ACPI
Jun 7 04:51:34 upstairs kernel: parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
Jun 7 04:51:34 upstairs kernel: parport_pc 00:06: driver attached
Jun 7 04:51:34 upstairs kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Jun 7 04:51:34 upstairs kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 7 04:51:34 upstairs kernel: usb usb1: Product: EHCI Host Controller
Jun 7 04:51:34 upstairs kernel: usb usb1: Manufacturer: Linux 2.6.26-rc5 ehci_hcd
Jun 7 04:51:34 upstairs kernel: usb usb1: SerialNumber: 0000:00:1d.7
Jun 7 04:51:34 upstairs kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
Jun 7 04:51:34 upstairs kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64
Jun 7 04:51:34 upstairs kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jun 7 04:51:34 upstairs kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Jun 7 04:51:34 upstairs kernel: uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000a800
Jun 7 04:51:34 upstairs kernel: usb usb2: configuration #1 chosen from 1 choice
Jun 7 04:51:34 upstairs kernel: hub 2-0:1.0: USB hub found
Jun 7 04:51:34 upstairs kernel: hub 2-0:1.0: 2 ports detected
Jun 7 04:51:34 upstairs kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Jun 7 04:51:34 upstairs kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 7 04:51:34 upstairs kernel: usb usb2: Product: UHCI Host Controller
Jun 7 04:51:34 upstairs kernel: usb usb2: Manufacturer: Linux 2.6.26-rc5 uhci_hcd
Jun 7 04:51:34 upstairs kernel: usb usb2: SerialNumber: 0000:00:1d.0
Jun 7 04:51:34 upstairs kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
Jun 7 04:51:34 upstairs kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64
Jun 7 04:51:34 upstairs kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jun 7 04:51:34 upstairs kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Jun 7 04:51:34 upstairs kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000
Jun 7 04:51:34 upstairs kernel: usb usb3: configuration #1 chosen from 1 choice
Jun 7 04:51:34 upstairs kernel: hub 3-0:1.0: USB hub found
Jun 7 04:51:34 upstairs kernel: hub 3-0:1.0: 2 ports detected
Jun 7 04:51:34 upstairs kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Jun 7 04:51:34 upstairs kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 7 04:51:34 upstairs kernel: usb usb3: Product: UHCI Host Controller
Jun 7 04:51:34 upstairs kernel: usb usb3: Manufacturer: Linux 2.6.26-rc5 uhci_hcd
Jun 7 04:51:34 upstairs kernel: usb usb3: SerialNumber: 0000:00:1d.1
Jun 7 04:51:34 upstairs kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Jun 7 04:51:34 upstairs kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64
Jun 7 04:51:34 upstairs kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jun 7 04:51:34 upstairs kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Jun 7 04:51:34 upstairs kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
Jun 7 04:51:34 upstairs kernel: usb usb4: configuration #1 chosen from 1 choice
Jun 7 04:51:34 upstairs kernel: hub 4-0:1.0: USB hub found
Jun 7 04:51:34 upstairs kernel: hub 4-0:1.0: 2 ports detected
Jun 7 04:51:34 upstairs kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Jun 7 04:51:34 upstairs kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 7 04:51:34 upstairs kernel: usb usb4: Product: UHCI Host Controller
Jun 7 04:51:34 upstairs kernel: usb usb4: Manufacturer: Linux 2.6.26-rc5 uhci_hcd
Jun 7 04:51:34 upstairs kernel: usb usb4: SerialNumber: 0000:00:1d.2
Jun 7 04:51:34 upstairs kernel: ACPI: PCI Interrupt 0000:02:09.2[C] -> GSI 19 (level, low) -> IRQ 19
Jun 7 04:51:34 upstairs kernel: ehci_hcd 0000:02:09.2: EHCI Host Controller
Jun 7 04:51:34 upstairs kernel: ehci_hcd 0000:02:09.2: new USB bus registered, assigned bus number 5
Jun 7 04:51:34 upstairs kernel: ehci_hcd 0000:02:09.2: irq 19, io mem 0xfbfffc00
Jun 7 04:51:34 upstairs kernel: ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
Jun 7 04:51:34 upstairs kernel: PCI: Setting latency timer of device 0000:00:1d.3 to 64
Jun 7 04:51:34 upstairs kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
Jun 7 04:51:34 upstairs kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 6
Jun 7 04:51:34 upstairs kernel: uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800
Jun 7 04:51:34 upstairs kernel: usb usb6: configuration #1 chosen from 1 choice
Jun 7 04:51:34 upstairs kernel: hub 6-0:1.0: USB hub found
Jun 7 04:51:34 upstairs kernel: hub 6-0:1.0: 2 ports detected
Jun 7 04:51:34 upstairs kernel: ehci_hcd 0000:02:09.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jun 7 04:51:34 upstairs kernel: usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
Jun 7 04:51:34 upstairs kernel: usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 7 04:51:34 upstairs kernel: usb usb6: Product: UHCI Host Controller
Jun 7 04:51:34 upstairs kernel: usb usb6: Manufacturer: Linux 2.6.26-rc5 uhci_hcd
Jun 7 04:51:34 upstairs kernel: usb usb6: SerialNumber: 0000:00:1d.3
Jun 7 04:51:34 upstairs kernel: usb usb5: configuration #1 chosen from 1 choice
Jun 7 04:51:34 upstairs kernel: hub 5-0:1.0: USB hub found
Jun 7 04:51:34 upstairs kernel: hub 5-0:1.0: 4 ports detected
Jun 7 04:51:34 upstairs kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Jun 7 04:51:34 upstairs kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 7 04:51:34 upstairs kernel: usb usb5: Product: EHCI Host Controller
Jun 7 04:51:34 upstairs kernel: usb usb5: Manufacturer: Linux 2.6.26-rc5 ehci_hcd
Jun 7 04:51:34 upstairs kernel: usb usb5: SerialNumber: 0000:02:09.2
Jun 7 04:51:34 upstairs kernel: ACPI: PCI Interrupt 0000:02:0a.2[C] -> GSI 23 (level, low) -> IRQ 23
Jun 7 04:51:34 upstairs kernel: ehci_hcd 0000:02:0a.2: EHCI Host Controller
Jun 7 04:51:34 upstairs kernel: ehci_hcd 0000:02:0a.2: new USB bus registered, assigned bus number 7
Jun 7 04:51:34 upstairs kernel: ehci_hcd 0000:02:0a.2: irq 23, io mem 0xfbfff800
Jun 7 04:51:34 upstairs kernel: usb 2-2: new full speed USB device using uhci_hcd and address 2
Jun 7 04:51:34 upstairs kernel: ehci_hcd 0000:02:0a.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
Jun 7 04:51:34 upstairs kernel: usb usb7: configuration #1 chosen from 1 choice
Jun 7 04:51:34 upstairs kernel: hub 7-0:1.0: USB hub found
Jun 7 04:51:34 upstairs kernel: hub 7-0:1.0: 5 ports detected
Jun 7 04:51:34 upstairs kernel: usb 2-2: configuration #1 chosen from 1 choice
Jun 7 04:51:34 upstairs kernel: usb 2-2: New USB device found, idVendor=06bd, idProduct=2061
Jun 7 04:51:34 upstairs kernel: usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jun 7 04:51:34 upstairs kernel: usb 2-2: Product: SNAPSCAN
Jun 7 04:51:34 upstairs kernel: usb 2-2: Manufacturer: AGFA
Jun 7 04:51:34 upstairs kernel: usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
Jun 7 04:51:34 upstairs kernel: usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 7 04:51:34 upstairs kernel: usb usb7: Product: EHCI Host Controller
Jun 7 04:51:34 upstairs kernel: usb usb7: Manufacturer: Linux 2.6.26-rc5 ehci_hcd
Jun 7 04:51:34 upstairs kernel: usb usb7: SerialNumber: 0000:02:0a.2
Jun 7 04:51:34 upstairs kernel: ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 17 (level, low) -> IRQ 17
Jun 7 04:51:34 upstairs kernel: uhci_hcd 0000:02:09.0: UHCI Host Controller
Jun 7 04:51:34 upstairs kernel: uhci_hcd 0000:02:09.0: new USB bus registered, assigned bus number 8
Jun 7 04:51:34 upstairs kernel: uhci_hcd 0000:02:09.0: irq 17, io base 0x0000e400
Jun 7 04:51:34 upstairs kernel: usb usb8: configuration #1 chosen from 1 choice
Jun 7 04:51:34 upstairs kernel: hub 8-0:1.0: USB hub found
Jun 7 04:51:34 upstairs kernel: hub 8-0:1.0: 2 ports detected
Jun 7 04:51:34 upstairs kernel: usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
Jun 7 04:51:34 upstairs kernel: usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 7 04:51:34 upstairs kernel: usb usb8: Product: UHCI Host Controller
Jun 7 04:51:34 upstairs kernel: usb usb8: Manufacturer: Linux 2.6.26-rc5 uhci_hcd
Jun 7 04:51:34 upstairs kernel: usb usb8: SerialNumber: 0000:02:09.0
Jun 7 04:51:34 upstairs kernel: ACPI: PCI Interrupt 0000:02:09.1[B] -> GSI 18 (level, low) -> IRQ 18
Jun 7 04:51:34 upstairs kernel: uhci_hcd 0000:02:09.1: UHCI Host Controller
Jun 7 04:51:34 upstairs kernel: uhci_hcd 0000:02:09.1: new USB bus registered, assigned bus number 9
Jun 7 04:51:34 upstairs kernel: uhci_hcd 0000:02:09.1: irq 18, io base 0x0000e800
Jun 7 04:51:34 upstairs kernel: usb usb9: configuration #1 chosen from 1 choice
Jun 7 04:51:34 upstairs kernel: hub 9-0:1.0: USB hub found
Jun 7 04:51:34 upstairs kernel: hub 9-0:1.0: 2 ports detected
Jun 7 04:51:34 upstairs kernel: usb 3-2: new low speed USB device using uhci_hcd and address 2
Jun 7 04:51:34 upstairs kernel: usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
Jun 7 04:51:34 upstairs kernel: usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 7 04:51:34 upstairs kernel: usb usb9: Product: UHCI Host Controller
Jun 7 04:51:34 upstairs kernel: usb usb9: Manufacturer: Linux 2.6.26-rc5 uhci_hcd
Jun 7 04:51:34 upstairs kernel: usb usb9: SerialNumber: 0000:02:09.1
Jun 7 04:51:34 upstairs kernel: ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 21 (level, low) -> IRQ 21
Jun 7 04:51:34 upstairs kernel: ohci_hcd 0000:02:0a.0: OHCI Host Controller
Jun 7 04:51:34 upstairs kernel: ohci_hcd 0000:02:0a.0: new USB bus registered, assigned bus number 10
Jun 7 04:51:34 upstairs kernel: ohci_hcd 0000:02:0a.0: irq 21, io mem 0xfbffd000
Jun 7 04:51:34 upstairs kernel: usb 3-2: configuration #1 chosen from 1 choice
Jun 7 04:51:34 upstairs kernel: usb 3-2: New USB device found, idVendor=045e, idProduct=00f1
Jun 7 04:51:34 upstairs kernel: usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jun 7 04:51:34 upstairs kernel: usb 3-2: Product: Microsoft Wireless Desktop Receiver 3.1A
Jun 7 04:51:34 upstairs kernel: usb 3-2: Manufacturer: Microsft
Jun 7 04:51:34 upstairs kernel: usb 5-1: new high speed USB device using ehci_hcd and address 2
Jun 7 04:51:34 upstairs kernel: usb 5-1: configuration #1 chosen from 1 choice
Jun 7 04:51:34 upstairs kernel: usb 5-1: New USB device found, idVendor=2040, idProduct=9950
Jun 7 04:51:34 upstairs kernel: usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jun 7 04:51:34 upstairs kernel: usb 5-1: Product: WinTV Nova-DT
Jun 7 04:51:34 upstairs kernel: usb 5-1: Manufacturer: Hauppauge
Jun 7 04:51:34 upstairs kernel: usb 5-1: SerialNumber: 4030248054
Jun 7 04:51:34 upstairs kernel: dib0700: loaded with support for 7 different device-types
Jun 7 04:51:34 upstairs kernel: usb 7-3: new high speed USB device using ehci_hcd and address 2
Jun 7 04:51:34 upstairs kernel: usb 7-3: configuration #1 chosen from 1 choice
Jun 7 04:51:34 upstairs kernel: hub 7-3:1.0: USB hub found
Jun 7 04:51:34 upstairs kernel: hub 7-3:1.0: 4 ports detected
Jun 7 04:51:34 upstairs kernel: usb usb10: configuration #1 chosen from 1 choice
Jun 7 04:51:34 upstairs kernel: hub 10-0:1.0: USB hub found
Jun 7 04:51:34 upstairs kernel: hub 10-0:1.0: 3 ports detected
Jun 7 04:51:34 upstairs kernel: usb 7-3: New USB device found, idVendor=0409, idProduct=0059
Jun 7 04:51:34 upstairs kernel: usb 7-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jun 7 04:51:34 upstairs kernel: dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware
Jun 7 04:51:34 upstairs kernel: firmware: requesting dvb-usb-dib0700-1.10.fw
Jun 7 04:51:34 upstairs kernel: dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
Jun 7 04:51:34 upstairs kernel: usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
Jun 7 04:51:34 upstairs kernel: usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 7 04:51:34 upstairs kernel: usb usb10: Product: OHCI Host Controller
Jun 7 04:51:34 upstairs kernel: usb usb10: Manufacturer: Linux 2.6.26-rc5 ohci_hcd
Jun 7 04:51:34 upstairs kernel: usb usb10: SerialNumber: 0000:02:0a.0
Jun 7 04:51:34 upstairs kernel: ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 22 (level, low) -> IRQ 22
Jun 7 04:51:34 upstairs kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fbfff000-fbfff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
Jun 7 04:51:34 upstairs kernel: ACPI: PCI Interrupt 0000:02:0a.1[B] -> GSI 22 (level, low) -> IRQ 22
Jun 7 04:51:34 upstairs kernel: ohci_hcd 0000:02:0a.1: OHCI Host Controller
Jun 7 04:51:34 upstairs kernel: ohci_hcd 0000:02:0a.1: new USB bus registered, assigned bus number 11
Jun 7 04:51:34 upstairs kernel: ohci_hcd 0000:02:0a.1: irq 22, io mem 0xfbffe000
Jun 7 04:51:34 upstairs kernel: input: Microsft Microsoft Wireless Desktop Receiver 3.1A as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input2
Jun 7 04:51:34 upstairs kernel: dib0700: firmware started successfully.
Jun 7 04:51:34 upstairs kernel: input: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1A] on usb-0000:00:1d.1-2
Jun 7 04:51:34 upstairs kernel: input: Microsft Microsoft Wireless Desktop Receiver 3.1A as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input3
Jun 7 04:51:34 upstairs kernel: input: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1A] on usb-0000:00:1d.1-2
Jun 7 04:51:34 upstairs kernel: usb usb11: configuration #1 chosen from 1 choice
Jun 7 04:51:34 upstairs kernel: hub 11-0:1.0: USB hub found
Jun 7 04:51:34 upstairs kernel: hub 11-0:1.0: 2 ports detected
Jun 7 04:51:34 upstairs kernel: dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state.
Jun 7 04:51:34 upstairs kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Jun 7 04:51:34 upstairs kernel: DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
Jun 7 04:51:34 upstairs kernel: DVB: registering frontend 0 (DiBcom 3000MC/P)...
Jun 7 04:51:34 upstairs kernel: MT2060: successfully identified (IF1 = 1230)
Jun 7 04:51:34 upstairs kernel: usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
Jun 7 04:51:34 upstairs kernel: usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 7 04:51:34 upstairs kernel: usb usb11: Product: OHCI Host Controller
Jun 7 04:51:34 upstairs kernel: usb usb11: Manufacturer: Linux 2.6.26-rc5 ohci_hcd
Jun 7 04:51:34 upstairs kernel: usb usb11: SerialNumber: 0000:02:0a.1
Jun 7 04:51:34 upstairs kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Jun 7 04:51:34 upstairs kernel: DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
Jun 7 04:51:34 upstairs kernel: DVB: registering frontend 1 (DiBcom 3000MC/P)...
Jun 7 04:51:34 upstairs kernel: ieee1394: Host added: ID:BUS[0-00:1023] GUID[00110666000013cc]
Jun 7 04:51:34 upstairs kernel: MT2060: successfully identified (IF1 = 1234)
Jun 7 04:51:34 upstairs kernel: input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1e.0/0000:02:09.2/usb5/5-1/input/input4
Jun 7 04:51:34 upstairs kernel: dvb-usb: schedule remote query interval to 150 msecs.
Jun 7 04:51:34 upstairs kernel: dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected.
Jun 7 04:51:34 upstairs kernel: usbcore: registered new interface driver usbhid
Jun 7 04:51:34 upstairs kernel: usbhid: v2.6:USB HID core driver
Jun 7 04:51:34 upstairs kernel: usbcore: registered new interface driver dvb_usb_dib0700
Jun 7 04:51:34 upstairs kernel: fuse init (API version 7.9)
Jun 7 04:51:34 upstairs kernel: kjournald starting. Commit interval 5 seconds
Jun 7 04:51:34 upstairs kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jun 7 04:51:34 upstairs kernel: EXT3 FS on sdb6, internal journal
Jun 7 04:51:34 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun 7 04:51:34 upstairs kernel: kjournald starting. Commit interval 5 seconds
Jun 7 04:51:34 upstairs kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jun 7 04:51:34 upstairs kernel: EXT3 FS on sda6, internal journal
Jun 7 04:51:34 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun 7 04:51:34 upstairs kernel: kjournald starting. Commit interval 5 seconds
Jun 7 04:51:34 upstairs kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jun 7 04:51:34 upstairs kernel: EXT3 FS on sda7, internal journal
Jun 7 04:51:34 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun 7 04:51:34 upstairs kernel: kjournald starting. Commit interval 5 seconds
Jun 7 04:51:34 upstairs kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jun 7 04:51:34 upstairs kernel: EXT3 FS on sdc2, internal journal
Jun 7 04:51:34 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun 7 04:51:34 upstairs kernel: Adding 4096532k swap on /dev/sda5. Priority:-1 extents:1 across:4096532k
Jun 7 04:51:34 upstairs kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Jun 7 04:51:34 upstairs kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jun 7 04:51:34 upstairs kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Jun 7 04:51:34 upstairs kernel: parport_pc 00:06: disabled
Jun 7 04:51:34 upstairs kernel: pnp: the driver 'parport_pc' has been unregistered
Jun 7 04:51:34 upstairs kernel: ieee1394: Node removed: ID:BUS[0-00:1023] GUID[00110666000013cc]
Jun 7 05:04:29 upstairs kernel: klogd 1.3-3, log source = /proc/kmsg started.
Jun 7 05:04:29 upstairs kernel: Inspecting /boot/System.map-2.6.26-rc5
Jun 7 05:04:30 upstairs kernel: Loaded 26367 symbols from /boot/System.map-2.6.26-rc5.
Jun 7 05:04:30 upstairs kernel: Symbols match kernel version 2.6.26.
Jun 7 05:04:30 upstairs kernel: No module symbols loaded - kernel modules not enabled.
Jun 7 05:04:30 upstairs kernel: _add
Jun 7 05:04:30 upstairs kernel: bus: 'usb': add device 2-0:1.0
Jun 7 05:04:30 upstairs kernel: PM: Adding info for usb:2-0:1.0
Jun 7 05:04:30 upstairs kernel: bus: 'usb': driver_probe_device: matched device 2-0:1.0 with driver hub
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: probing driver hub with device 2-0:1.0
Jun 7 05:04:30 upstairs kernel: hub 2-0:1.0: USB hub found
Jun 7 05:04:30 upstairs kernel: hub 2-0:1.0: 2 ports detected
Jun 7 05:04:30 upstairs kernel: bus: 'pci': add driver ohci1394
Jun 7 05:04:30 upstairs kernel: driver: '2-0:1.0': driver_bound: bound to device 'hub'
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: bound device 2-0:1.0 to driver hub
Jun 7 05:04:30 upstairs kernel: device: 'usbdev2.1_ep81': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usbdev2.1_ep81
Jun 7 05:04:30 upstairs kernel: driver: 'usb2': driver_bound: bound to device 'usb'
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: bound device usb2 to driver usb
Jun 7 05:04:30 upstairs kernel: device: 'usbdev2.1_ep00': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usbdev2.1_ep00
Jun 7 05:04:30 upstairs kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Jun 7 05:04:30 upstairs kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 7 05:04:30 upstairs kernel: usb usb2: Product: UHCI Host Controller
Jun 7 05:04:30 upstairs kernel: usb usb2: Manufacturer: Linux 2.6.26-rc5 uhci_hcd
Jun 7 05:04:30 upstairs kernel: usb usb2: SerialNumber: 0000:00:1d.1
Jun 7 05:04:30 upstairs kernel: driver: '0000:00:1d.1': driver_bound: bound to device 'uhci_hcd'
Jun 7 05:04:30 upstairs kernel: bus: 'pci': really_probe: bound device 0000:00:1d.1 to driver uhci_hcd
Jun 7 05:04:30 upstairs kernel: bus: 'pci': driver_probe_device: matched device 0000:00:1d.2 with driver uhci_hcd
Jun 7 05:04:30 upstairs kernel: bus: 'pci': really_probe: probing driver uhci_hcd with device 0000:00:1d.2
Jun 7 05:04:30 upstairs kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Jun 7 05:04:30 upstairs kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64
Jun 7 05:04:30 upstairs kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jun 7 05:04:30 upstairs kernel: device: 'usb_host3': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usb_host3
Jun 7 05:04:30 upstairs kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Jun 7 05:04:30 upstairs kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
Jun 7 05:04:30 upstairs kernel: device: 'usb3': device_add
Jun 7 05:04:30 upstairs kernel: bus: 'usb': add device usb3
Jun 7 05:04:30 upstairs kernel: PM: Adding info for usb:usb3
Jun 7 05:04:30 upstairs kernel: bus: 'usb': driver_probe_device: matched device usb3 with driver usb
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: probing driver usb with device usb3
Jun 7 05:04:30 upstairs kernel: usb usb3: configuration #1 chosen from 1 choice
Jun 7 05:04:30 upstairs kernel: device: '3-0:1.0': device_add
Jun 7 05:04:30 upstairs kernel: bus: 'usb': add device 3-0:1.0
Jun 7 05:04:30 upstairs kernel: PM: Adding info for usb:3-0:1.0
Jun 7 05:04:30 upstairs kernel: bus: 'usb': driver_probe_device: matched device 3-0:1.0 with driver hub
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: probing driver hub with device 3-0:1.0
Jun 7 05:04:30 upstairs kernel: hub 3-0:1.0: USB hub found
Jun 7 05:04:30 upstairs kernel: hub 3-0:1.0: 2 ports detected
Jun 7 05:04:30 upstairs kernel: driver: '3-0:1.0': driver_bound: bound to device 'hub'
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: bound device 3-0:1.0 to driver hub
Jun 7 05:04:30 upstairs kernel: device: 'usbdev3.1_ep81': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usbdev3.1_ep81
Jun 7 05:04:30 upstairs kernel: driver: 'usb3': driver_bound: bound to device 'usb'
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: bound device usb3 to driver usb
Jun 7 05:04:30 upstairs kernel: device: 'usbdev3.1_ep00': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usbdev3.1_ep00
Jun 7 05:04:30 upstairs kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Jun 7 05:04:30 upstairs kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 7 05:04:30 upstairs kernel: usb usb3: Product: UHCI Host Controller
Jun 7 05:04:30 upstairs kernel: usb usb3: Manufacturer: Linux 2.6.26-rc5 uhci_hcd
Jun 7 05:04:30 upstairs kernel: usb usb3: SerialNumber: 0000:00:1d.2
Jun 7 05:04:30 upstairs kernel: driver: '0000:00:1d.2': driver_bound: bound to device 'uhci_hcd'
Jun 7 05:04:30 upstairs kernel: bus: 'pci': really_probe: bound device 0000:00:1d.2 to driver uhci_hcd
Jun 7 05:04:30 upstairs kernel: bus: 'pci': driver_probe_device: matched device 0000:00:1d.3 with driver uhci_hcd
Jun 7 05:04:30 upstairs kernel: bus: 'pci': really_probe: probing driver uhci_hcd with device 0000:00:1d.3
Jun 7 05:04:30 upstairs kernel: ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
Jun 7 05:04:30 upstairs kernel: PCI: Setting latency timer of device 0000:00:1d.3 to 64
Jun 7 05:04:30 upstairs kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
Jun 7 05:04:30 upstairs kernel: device: 'usb_host4': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usb_host4
Jun 7 05:04:30 upstairs kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Jun 7 05:04:30 upstairs kernel: uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800
Jun 7 05:04:30 upstairs kernel: device: 'usb4': device_add
Jun 7 05:04:30 upstairs kernel: bus: 'usb': add device usb4
Jun 7 05:04:30 upstairs kernel: PM: Adding info for usb:usb4
Jun 7 05:04:30 upstairs kernel: bus: 'usb': driver_probe_device: matched device usb4 with driver usb
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: probing driver usb with device usb4
Jun 7 05:04:30 upstairs kernel: usb usb4: configuration #1 chosen from 1 choice
Jun 7 05:04:30 upstairs kernel: device: '4-0:1.0': device_add
Jun 7 05:04:30 upstairs kernel: bus: 'usb': add device 4-0:1.0
Jun 7 05:04:30 upstairs kernel: PM: Adding info for usb:4-0:1.0
Jun 7 05:04:30 upstairs kernel: bus: 'usb': driver_probe_device: matched device 4-0:1.0 with driver hub
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: probing driver hub with device 4-0:1.0
Jun 7 05:04:30 upstairs kernel: hub 4-0:1.0: USB hub found
Jun 7 05:04:30 upstairs kernel: hub 4-0:1.0: 2 ports detected
Jun 7 05:04:30 upstairs kernel: usb 1-2: new full speed USB device using uhci_hcd and address 2
Jun 7 05:04:30 upstairs kernel: device: '1-2': device_add
Jun 7 05:04:30 upstairs kernel: bus: 'usb': add device 1-2
Jun 7 05:04:30 upstairs kernel: PM: Adding info for usb:1-2
Jun 7 05:04:30 upstairs kernel: bus: 'usb': driver_probe_device: matched device 1-2 with driver usb
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: probing driver usb with device 1-2
Jun 7 05:04:30 upstairs kernel: usb 1-2: configuration #1 chosen from 1 choice
Jun 7 05:04:30 upstairs kernel: device: '1-2:1.0': device_add
Jun 7 05:04:30 upstairs kernel: bus: 'usb': add device 1-2:1.0
Jun 7 05:04:30 upstairs kernel: PM: Adding info for usb:1-2:1.0
Jun 7 05:04:30 upstairs kernel: device: 'usbdev1.2_ep81': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usbdev1.2_ep81
Jun 7 05:04:30 upstairs kernel: device: 'usbdev1.2_ep02': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usbdev1.2_ep02
Jun 7 05:04:30 upstairs kernel: device: 'usbdev1.2_ep83': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usbdev1.2_ep83
Jun 7 05:04:30 upstairs kernel: driver: '1-2': driver_bound: bound to device 'usb'
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: bound device 1-2 to driver usb
Jun 7 05:04:30 upstairs kernel: device: 'usbdev1.2_ep00': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usbdev1.2_ep00
Jun 7 05:04:30 upstairs kernel: usb 1-2: New USB device found, idVendor=06bd, idProduct=2061
Jun 7 05:04:30 upstairs kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jun 7 05:04:30 upstairs kernel: usb 1-2: Product: SNAPSCAN
Jun 7 05:04:30 upstairs kernel: usb 1-2: Manufacturer: AGFA
Jun 7 05:04:30 upstairs kernel: driver: '4-0:1.0': driver_bound: bound to device 'hub'
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: bound device 4-0:1.0 to driver hub
Jun 7 05:04:30 upstairs kernel: device: 'usbdev4.1_ep81': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usbdev4.1_ep81
Jun 7 05:04:30 upstairs kernel: driver: 'usb4': driver_bound: bound to device 'usb'
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: bound device usb4 to driver usb
Jun 7 05:04:30 upstairs kernel: device: 'usbdev4.1_ep00': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usbdev4.1_ep00
Jun 7 05:04:30 upstairs kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Jun 7 05:04:30 upstairs kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 7 05:04:30 upstairs kernel: usb usb4: Product: UHCI Host Controller
Jun 7 05:04:30 upstairs kernel: usb usb4: Manufacturer: Linux 2.6.26-rc5 uhci_hcd
Jun 7 05:04:30 upstairs kernel: usb usb4: SerialNumber: 0000:00:1d.3
Jun 7 05:04:30 upstairs kernel: driver: '0000:00:1d.3': driver_bound: bound to device 'uhci_hcd'
Jun 7 05:04:30 upstairs kernel: bus: 'pci': really_probe: bound device 0000:00:1d.3 to driver uhci_hcd
Jun 7 05:04:30 upstairs kernel: bus: 'pci': driver_probe_device: matched device 0000:00:1d.7 with driver ehci_hcd
Jun 7 05:04:30 upstairs kernel: bus: 'pci': really_probe: probing driver ehci_hcd with device 0000:00:1d.7
Jun 7 05:04:30 upstairs kernel: ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
Jun 7 05:04:30 upstairs kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64
Jun 7 05:04:30 upstairs kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Jun 7 05:04:30 upstairs kernel: device: 'usb_host5': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usb_host5
Jun 7 05:04:30 upstairs kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
Jun 7 05:04:30 upstairs kernel: ehci_hcd 0000:00:1d.7: debug port 1
Jun 7 05:04:30 upstairs kernel: PCI: cache line size of 128 is not supported by device 0000:00:1d.7
Jun 7 05:04:30 upstairs kernel: ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fffc00
Jun 7 05:04:30 upstairs kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jun 7 05:04:30 upstairs kernel: device: 'usb5': device_add
Jun 7 05:04:30 upstairs kernel: bus: 'usb': add device usb5
Jun 7 05:04:30 upstairs kernel: PM: Adding info for usb:usb5
Jun 7 05:04:30 upstairs kernel: bus: 'usb': driver_probe_device: matched device usb5 with driver usb
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: probing driver usb with device usb5
Jun 7 05:04:30 upstairs kernel: usb usb5: configuration #1 chosen from 1 choice
Jun 7 05:04:30 upstairs kernel: device: '5-0:1.0': device_add
Jun 7 05:04:30 upstairs kernel: bus: 'usb': add device 5-0:1.0
Jun 7 05:04:30 upstairs kernel: PM: Adding info for usb:5-0:1.0
Jun 7 05:04:30 upstairs kernel: bus: 'usb': driver_probe_device: matched device 5-0:1.0 with driver hub
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: probing driver hub with device 5-0:1.0
Jun 7 05:04:30 upstairs kernel: hub 5-0:1.0: USB hub found
Jun 7 05:04:30 upstairs kernel: hub 5-0:1.0: 8 ports detected
Jun 7 05:04:30 upstairs kernel: driver: '5-0:1.0': driver_bound: bound to device 'hub'
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: bound device 5-0:1.0 to driver hub
Jun 7 05:04:30 upstairs kernel: device: 'usbdev5.1_ep81': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usbdev5.1_ep81
Jun 7 05:04:30 upstairs kernel: driver: 'usb5': driver_bound: bound to device 'usb'
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: bound device usb5 to driver usb
Jun 7 05:04:30 upstairs kernel: device: 'usbdev5.1_ep00': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usbdev5.1_ep00
Jun 7 05:04:30 upstairs kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Jun 7 05:04:30 upstairs kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 7 05:04:30 upstairs kernel: usb usb5: Product: EHCI Host Controller
Jun 7 05:04:30 upstairs kernel: usb usb5: Manufacturer: Linux 2.6.26-rc5 ehci_hcd
Jun 7 05:04:30 upstairs kernel: usb usb5: SerialNumber: 0000:00:1d.7
Jun 7 05:04:30 upstairs kernel: driver: '0000:00:1d.7': driver_bound: bound to device 'ehci_hcd'
Jun 7 05:04:30 upstairs kernel: bus: 'pci': really_probe: bound device 0000:00:1d.7 to driver ehci_hcd
Jun 7 05:04:30 upstairs kernel: bus: 'pci': driver_probe_device: matched device 0000:02:09.0 with driver uhci_hcd
Jun 7 05:04:30 upstairs kernel: bus: 'pci': really_probe: probing driver uhci_hcd with device 0000:02:09.0
Jun 7 05:04:30 upstairs kernel: ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 17 (level, low) -> IRQ 17
Jun 7 05:04:30 upstairs kernel: uhci_hcd 0000:02:09.0: UHCI Host Controller
Jun 7 05:04:30 upstairs kernel: device: 'usb_host6': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usb_host6
Jun 7 05:04:30 upstairs kernel: uhci_hcd 0000:02:09.0: new USB bus registered, assigned bus number 6
Jun 7 05:04:30 upstairs kernel: uhci_hcd 0000:02:09.0: irq 17, io base 0x0000e400
Jun 7 05:04:30 upstairs kernel: device: 'usb6': device_add
Jun 7 05:04:30 upstairs kernel: bus: 'usb': add device usb6
Jun 7 05:04:30 upstairs kernel: PM: Adding info for usb:usb6
Jun 7 05:04:30 upstairs kernel: bus: 'usb': driver_probe_device: matched device usb6 with driver usb
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: probing driver usb with device usb6
Jun 7 05:04:30 upstairs kernel: usb usb6: configuration #1 chosen from 1 choice
Jun 7 05:04:30 upstairs kernel: device: '6-0:1.0': device_add
Jun 7 05:04:30 upstairs kernel: bus: 'usb': add device 6-0:1.0
Jun 7 05:04:30 upstairs kernel: PM: Adding info for usb:6-0:1.0
Jun 7 05:04:30 upstairs kernel: bus: 'usb': driver_probe_device: matched device 6-0:1.0 with driver hub
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: probing driver hub with device 6-0:1.0
Jun 7 05:04:30 upstairs kernel: hub 6-0:1.0: USB hub found
Jun 7 05:04:30 upstairs kernel: hub 6-0:1.0: 2 ports detected
Jun 7 05:04:30 upstairs kernel: driver: '6-0:1.0': driver_bound: bound to device 'hub'
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: bound device 6-0:1.0 to driver hub
Jun 7 05:04:30 upstairs kernel: device: 'usbdev6.1_ep81': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usbdev6.1_ep81
Jun 7 05:04:30 upstairs kernel: driver: 'usb6': driver_bound: bound to device 'usb'
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: bound device usb6 to driver usb
Jun 7 05:04:30 upstairs kernel: device: 'usbdev6.1_ep00': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usbdev6.1_ep00
Jun 7 05:04:30 upstairs kernel: usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
Jun 7 05:04:30 upstairs kernel: usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 7 05:04:30 upstairs kernel: usb usb6: Product: UHCI Host Controller
Jun 7 05:04:30 upstairs kernel: usb usb6: Manufacturer: Linux 2.6.26-rc5 uhci_hcd
Jun 7 05:04:30 upstairs kernel: usb usb6: SerialNumber: 0000:02:09.0
Jun 7 05:04:30 upstairs kernel: driver: '0000:02:09.0': driver_bound: bound to device 'uhci_hcd'
Jun 7 05:04:30 upstairs kernel: bus: 'pci': really_probe: bound device 0000:02:09.0 to driver uhci_hcd
Jun 7 05:04:30 upstairs kernel: bus: 'pci': driver_probe_device: matched device 0000:02:09.1 with driver uhci_hcd
Jun 7 05:04:30 upstairs kernel: bus: 'pci': really_probe: probing driver uhci_hcd with device 0000:02:09.1
Jun 7 05:04:30 upstairs kernel: ACPI: PCI Interrupt 0000:02:09.1[B] -> GSI 18 (level, low) -> IRQ 18
Jun 7 05:04:30 upstairs kernel: uhci_hcd 0000:02:09.1: UHCI Host Controller
Jun 7 05:04:30 upstairs kernel: device: 'usb_host7': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usb_host7
Jun 7 05:04:30 upstairs kernel: uhci_hcd 0000:02:09.1: new USB bus registered, assigned bus number 7
Jun 7 05:04:30 upstairs kernel: uhci_hcd 0000:02:09.1: irq 18, io base 0x0000e800
Jun 7 05:04:30 upstairs kernel: device: 'usb7': device_add
Jun 7 05:04:30 upstairs kernel: bus: 'usb': add device usb7
Jun 7 05:04:30 upstairs kernel: PM: Adding info for usb:usb7
Jun 7 05:04:30 upstairs kernel: bus: 'usb': driver_probe_device: matched device usb7 with driver usb
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: probing driver usb with device usb7
Jun 7 05:04:30 upstairs kernel: usb usb7: configuration #1 chosen from 1 choice
Jun 7 05:04:30 upstairs kernel: device: '7-0:1.0': device_add
Jun 7 05:04:30 upstairs kernel: bus: 'usb': add device 7-0:1.0
Jun 7 05:04:30 upstairs kernel: PM: Adding info for usb:7-0:1.0
Jun 7 05:04:30 upstairs kernel: bus: 'usb': driver_probe_device: matched device 7-0:1.0 with driver hub
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: probing driver hub with device 7-0:1.0
Jun 7 05:04:30 upstairs kernel: hub 7-0:1.0: USB hub found
Jun 7 05:04:30 upstairs kernel: hub 7-0:1.0: 2 ports detected
Jun 7 05:04:30 upstairs kernel: driver: '7-0:1.0': driver_bound: bound to device 'hub'
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: bound device 7-0:1.0 to driver hub
Jun 7 05:04:30 upstairs kernel: device: 'usbdev7.1_ep81': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usbdev7.1_ep81
Jun 7 05:04:30 upstairs kernel: driver: 'usb7': driver_bound: bound to device 'usb'
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: bound device usb7 to driver usb
Jun 7 05:04:30 upstairs kernel: device: 'usbdev7.1_ep00': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usbdev7.1_ep00
Jun 7 05:04:30 upstairs kernel: usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
Jun 7 05:04:30 upstairs kernel: usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 7 05:04:30 upstairs kernel: usb usb7: Product: UHCI Host Controller
Jun 7 05:04:30 upstairs kernel: usb usb7: Manufacturer: Linux 2.6.26-rc5 uhci_hcd
Jun 7 05:04:30 upstairs kernel: usb usb7: SerialNumber: 0000:02:09.1
Jun 7 05:04:30 upstairs kernel: driver: '0000:02:09.1': driver_bound: bound to device 'uhci_hcd'
Jun 7 05:04:30 upstairs kernel: bus: 'pci': really_probe: bound device 0000:02:09.1 to driver uhci_hcd
Jun 7 05:04:30 upstairs kernel: bus: 'pci': driver_probe_device: matched device 0000:02:09.2 with driver ehci_hcd
Jun 7 05:04:30 upstairs kernel: bus: 'pci': really_probe: probing driver ehci_hcd with device 0000:02:09.2
Jun 7 05:04:30 upstairs kernel: ACPI: PCI Interrupt 0000:02:09.2[C] -> GSI 19 (level, low) -> IRQ 19
Jun 7 05:04:30 upstairs kernel: ehci_hcd 0000:02:09.2: EHCI Host Controller
Jun 7 05:04:30 upstairs kernel: device: 'usb_host8': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usb_host8
Jun 7 05:04:30 upstairs kernel: ehci_hcd 0000:02:09.2: new USB bus registered, assigned bus number 8
Jun 7 05:04:30 upstairs kernel: ehci_hcd 0000:02:09.2: irq 19, io mem 0xfbfffc00
Jun 7 05:04:30 upstairs kernel: ehci_hcd 0000:02:09.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jun 7 05:04:30 upstairs kernel: device: 'usb8': device_add
Jun 7 05:04:30 upstairs kernel: bus: 'usb': add device usb8
Jun 7 05:04:30 upstairs kernel: PM: Adding info for usb:usb8
Jun 7 05:04:30 upstairs kernel: bus: 'usb': driver_probe_device: matched device usb8 with driver usb
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: probing driver usb with device usb8
Jun 7 05:04:30 upstairs kernel: usb usb8: configuration #1 chosen from 1 choice
Jun 7 05:04:30 upstairs kernel: device: '8-0:1.0': device_add
Jun 7 05:04:30 upstairs kernel: bus: 'usb': add device 8-0:1.0
Jun 7 05:04:30 upstairs kernel: PM: Adding info for usb:8-0:1.0
Jun 7 05:04:30 upstairs kernel: bus: 'usb': driver_probe_device: matched device 8-0:1.0 with driver hub
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: probing driver hub with device 8-0:1.0
Jun 7 05:04:30 upstairs kernel: hub 8-0:1.0: USB hub found
Jun 7 05:04:30 upstairs kernel: hub 8-0:1.0: 4 ports detected
Jun 7 05:04:30 upstairs kernel: driver: '8-0:1.0': driver_bound: bound to device 'hub'
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: bound device 8-0:1.0 to driver hub
Jun 7 05:04:30 upstairs kernel: device: 'usbdev8.1_ep81': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usbdev8.1_ep81
Jun 7 05:04:30 upstairs kernel: driver: 'usb8': driver_bound: bound to device 'usb'
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: bound device usb8 to driver usb
Jun 7 05:04:30 upstairs kernel: device: 'usbdev8.1_ep00': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usbdev8.1_ep00
Jun 7 05:04:30 upstairs kernel: usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
Jun 7 05:04:30 upstairs kernel: usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 7 05:04:30 upstairs kernel: usb usb8: Product: EHCI Host Controller
Jun 7 05:04:30 upstairs kernel: usb usb8: Manufacturer: Linux 2.6.26-rc5 ehci_hcd
Jun 7 05:04:30 upstairs kernel: usb usb8: SerialNumber: 0000:02:09.2
Jun 7 05:04:30 upstairs kernel: driver: '0000:02:09.2': driver_bound: bound to device 'ehci_hcd'
Jun 7 05:04:30 upstairs kernel: bus: 'pci': really_probe: bound device 0000:02:09.2 to driver ehci_hcd
Jun 7 05:04:30 upstairs kernel: bus: 'pci': driver_probe_device: matched device 0000:02:0a.0 with driver ohci_hcd
Jun 7 05:04:30 upstairs kernel: bus: 'pci': really_probe: probing driver ohci_hcd with device 0000:02:0a.0
Jun 7 05:04:30 upstairs kernel: ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 21 (level, low) -> IRQ 21
Jun 7 05:04:30 upstairs kernel: ohci_hcd 0000:02:0a.0: OHCI Host Controller
Jun 7 05:04:30 upstairs kernel: device: 'usb_host9': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usb_host9
Jun 7 05:04:30 upstairs kernel: ohci_hcd 0000:02:0a.0: new USB bus registered, assigned bus number 9
Jun 7 05:04:30 upstairs kernel: ohci_hcd 0000:02:0a.0: irq 21, io mem 0xfbffd000
Jun 7 05:04:30 upstairs kernel: usb 1-2: USB disconnect, address 2
Jun 7 05:04:30 upstairs kernel: PM: Removing info for usb:1-2:1.0
Jun 7 05:04:30 upstairs kernel: bus: 'usb': remove device 1-2:1.0
Jun 7 05:04:30 upstairs kernel: device: 'usbdev1.2_ep81': device_unregister
Jun 7 05:04:30 upstairs kernel: PM: Removing info for No Bus:usbdev1.2_ep81
Jun 7 05:04:30 upstairs kernel: device: 'usbdev1.2_ep02': device_unregister
Jun 7 05:04:30 upstairs kernel: PM: Removing info for No Bus:usbdev1.2_ep02
Jun 7 05:04:30 upstairs kernel: device: 'usbdev1.2_ep83': device_unregister
Jun 7 05:04:30 upstairs kernel: PM: Removing info for No Bus:usbdev1.2_ep83
Jun 7 05:04:30 upstairs kernel: device: 'usbdev1.2_ep00': device_unregister
Jun 7 05:04:30 upstairs kernel: PM: Removing info for No Bus:usbdev1.2_ep00
Jun 7 05:04:30 upstairs kernel: PM: Removing info for usb:1-2
Jun 7 05:04:30 upstairs kernel: bus: 'usb': remove device 1-2
Jun 7 05:04:30 upstairs kernel: usb 1-2: new full speed USB device using uhci_hcd and address 3
Jun 7 05:04:30 upstairs kernel: device: '1-2': device_add
Jun 7 05:04:30 upstairs kernel: bus: 'usb': add device 1-2
Jun 7 05:04:30 upstairs kernel: PM: Adding info for usb:1-2
Jun 7 05:04:30 upstairs kernel: bus: 'usb': driver_probe_device: matched device 1-2 with driver usb
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: probing driver usb with device 1-2
Jun 7 05:04:30 upstairs kernel: usb 1-2: configuration #1 chosen from 1 choice
Jun 7 05:04:30 upstairs kernel: device: '1-2:1.0': device_add
Jun 7 05:04:30 upstairs kernel: bus: 'usb': add device 1-2:1.0
Jun 7 05:04:30 upstairs kernel: PM: Adding info for usb:1-2:1.0
Jun 7 05:04:30 upstairs kernel: device: 'usbdev1.3_ep81': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usbdev1.3_ep81
Jun 7 05:04:30 upstairs kernel: device: 'usbdev1.3_ep02': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usbdev1.3_ep02
Jun 7 05:04:30 upstairs kernel: device: 'usbdev1.3_ep83': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usbdev1.3_ep83
Jun 7 05:04:30 upstairs kernel: driver: '1-2': driver_bound: bound to device 'usb'
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: bound device 1-2 to driver usb
Jun 7 05:04:30 upstairs kernel: device: 'usbdev1.3_ep00': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usbdev1.3_ep00
Jun 7 05:04:30 upstairs kernel: usb 1-2: New USB device found, idVendor=06bd, idProduct=2061
Jun 7 05:04:30 upstairs kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jun 7 05:04:30 upstairs kernel: usb 1-2: Product: SNAPSCAN
Jun 7 05:04:30 upstairs kernel: usb 1-2: Manufacturer: AGFA
Jun 7 05:04:30 upstairs kernel: device: 'usb9': device_add
Jun 7 05:04:30 upstairs kernel: bus: 'usb': add device usb9
Jun 7 05:04:30 upstairs kernel: PM: Adding info for usb:usb9
Jun 7 05:04:30 upstairs kernel: bus: 'usb': driver_probe_device: matched device usb9 with driver usb
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: probing driver usb with device usb9
Jun 7 05:04:30 upstairs kernel: usb usb9: configuration #1 chosen from 1 choice
Jun 7 05:04:30 upstairs kernel: device: '9-0:1.0': device_add
Jun 7 05:04:30 upstairs kernel: bus: 'usb': add device 9-0:1.0
Jun 7 05:04:30 upstairs kernel: PM: Adding info for usb:9-0:1.0
Jun 7 05:04:30 upstairs kernel: bus: 'usb': driver_probe_device: matched device 9-0:1.0 with driver hub
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: probing driver hub with device 9-0:1.0
Jun 7 05:04:30 upstairs kernel: hub 9-0:1.0: USB hub found
Jun 7 05:04:30 upstairs kernel: hub 9-0:1.0: 3 ports detected
Jun 7 05:04:30 upstairs kernel: usb 8-1: new high speed USB device using ehci_hcd and address 2
Jun 7 05:04:30 upstairs kernel: device: '8-1': device_add
Jun 7 05:04:30 upstairs kernel: bus: 'usb': add device 8-1
Jun 7 05:04:30 upstairs kernel: PM: Adding info for usb:8-1
Jun 7 05:04:30 upstairs kernel: bus: 'usb': driver_probe_device: matched device 8-1 with driver usb
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: probing driver usb with device 8-1
Jun 7 05:04:30 upstairs kernel: usb 8-1: configuration #1 chosen from 1 choice
Jun 7 05:04:30 upstairs kernel: device: '8-1:1.0': device_add
Jun 7 05:04:30 upstairs kernel: bus: 'usb': add device 8-1:1.0
Jun 7 05:04:30 upstairs kernel: PM: Adding info for usb:8-1:1.0
Jun 7 05:04:30 upstairs kernel: device: 'usbdev8.2_ep01': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usbdev8.2_ep01
Jun 7 05:04:30 upstairs kernel: device: 'usbdev8.2_ep81': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usbdev8.2_ep81
Jun 7 05:04:30 upstairs kernel: device: 'usbdev8.2_ep82': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usbdev8.2_ep82
Jun 7 05:04:30 upstairs kernel: device: 'usbdev8.2_ep83': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usbdev8.2_ep83
Jun 7 05:04:30 upstairs kernel: driver: '8-1': driver_bound: bound to device 'usb'
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: bound device 8-1 to driver usb
Jun 7 05:04:30 upstairs kernel: device: 'usbdev8.2_ep00': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usbdev8.2_ep00
Jun 7 05:04:30 upstairs kernel: usb 8-1: New USB device found, idVendor=2040, idProduct=9950
Jun 7 05:04:30 upstairs kernel: usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jun 7 05:04:30 upstairs kernel: usb 8-1: Product: WinTV Nova-DT
Jun 7 05:04:30 upstairs kernel: usb 8-1: Manufacturer: Hauppauge
Jun 7 05:04:30 upstairs kernel: usb 8-1: SerialNumber: 4030248054
Jun 7 05:04:30 upstairs kernel: driver: '9-0:1.0': driver_bound: bound to device 'hub'
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: bound device 9-0:1.0 to driver hub
Jun 7 05:04:30 upstairs kernel: device: 'usbdev9.1_ep81': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usbdev9.1_ep81
Jun 7 05:04:30 upstairs kernel: driver: 'usb9': driver_bound: bound to device 'usb'
Jun 7 05:04:30 upstairs kernel: bus: 'usb': really_probe: bound device usb9 to driver usb
Jun 7 05:04:30 upstairs kernel: device: 'usbdev9.1_ep00': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usbdev9.1_ep00
Jun 7 05:04:30 upstairs kernel: usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
Jun 7 05:04:30 upstairs kernel: usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 7 05:04:30 upstairs kernel: usb usb9: Product: OHCI Host Controller
Jun 7 05:04:30 upstairs kernel: usb usb9: Manufacturer: Linux 2.6.26-rc5 ohci_hcd
Jun 7 05:04:30 upstairs kernel: usb usb9: SerialNumber: 0000:02:0a.0
Jun 7 05:04:30 upstairs kernel: driver: '0000:02:0a.0': driver_bound: bound to device 'ohci_hcd'
Jun 7 05:04:30 upstairs kernel: bus: 'pci': really_probe: bound device 0000:02:0a.0 to driver ohci_hcd
Jun 7 05:04:30 upstairs kernel: bus: 'pci': driver_probe_device: matched device 0000:02:0a.2 with driver ehci_hcd
Jun 7 05:04:30 upstairs kernel: bus: 'pci': really_probe: probing driver ehci_hcd with device 0000:02:0a.2
Jun 7 05:04:30 upstairs kernel: ACPI: PCI Interrupt 0000:02:0a.2[C] -> GSI 23 (level, low) -> IRQ 23
Jun 7 05:04:30 upstairs kernel: ehci_hcd 0000:02:0a.2: EHCI Host Controller
Jun 7 05:04:30 upstairs kernel: device: 'usb_host10': device_add
Jun 7 05:04:30 upstairs kernel: PM: Adding info for No Bus:usb_host10
Jun 7 05:04:30 upstairs kernel: ehci_hcd 0000:02:0a.2: new USB bus registered, assigned bus number 10
Jun 7 05:04:30 upstairs kernel: ehci_hcd 0000:02:0a.2: irq 23, io mem 0xfbfff800
Jun 7 05:04:30 upstairs kernel: usb 2-2: new low speed USB device using uhci_hcd and address 2
Jun 7 05:04:30 upstairs kernel: ehci_hcd 0000:02:0a.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
Jun 7 05:05:03 upstairs kernel: device: 'usb10': device_add
Jun 7 05:05:03 upstairs kernel: bus: 'usb': add device usb10
Jun 7 05:05:03 upstairs kernel: PM: Adding info for usb:usb10
Jun 7 05:05:03 upstairs kernel: bus: 'usb': driver_probe_device: matched device usb10 with driver usb
Jun 7 05:05:03 upstairs kernel: bus: 'usb': really_probe: probing driver usb with device usb10
Jun 7 05:05:03 upstairs kernel: usb usb10: configuration #1 chosen from 1 choice
Jun 7 05:05:03 upstairs kernel: device: '10-0:1.0': device_add
Jun 7 05:05:03 upstairs kernel: bus: 'usb': add device 10-0:1.0
Jun 7 05:05:03 upstairs kernel: PM: Adding info for usb:10-0:1.0
Jun 7 05:05:03 upstairs kernel: bus: 'usb': driver_probe_device: matched device 10-0:1.0 with driver hub
Jun 7 05:05:03 upstairs kernel: bus: 'usb': really_probe: probing driver hub with device 10-0:1.0
Jun 7 05:05:03 upstairs kernel: hub 10-0:1.0: USB hub found
Jun 7 05:05:03 upstairs kernel: hub 10-0:1.0: 5 ports detected
Jun 7 05:05:03 upstairs kernel: device: '2-2': device_add
Jun 7 05:05:03 upstairs kernel: bus: 'usb': add device 2-2
Jun 7 05:05:03 upstairs kernel: PM: Adding info for usb:2-2
Jun 7 05:05:03 upstairs kernel: bus: 'usb': driver_probe_device: matched device 2-2 with driver usb
Jun 7 05:05:03 upstairs kernel: bus: 'usb': really_probe: probing driver usb with device 2-2
Jun 7 05:05:03 upstairs kernel: usb 2-2: configuration #1 chosen from 1 choice
Jun 7 05:05:03 upstairs kernel: device: '2-2:1.0': device_add
Jun 7 05:05:03 upstairs kernel: bus: 'usb': add device 2-2:1.0
Jun 7 05:05:03 upstairs kernel: PM: Adding info for usb:2-2:1.0
Jun 7 05:05:03 upstairs kernel: device: 'usbdev2.2_ep81': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:usbdev2.2_ep81
Jun 7 05:05:03 upstairs kernel: device: '2-2:1.1': device_add
Jun 7 05:05:03 upstairs kernel: bus: 'usb': add device 2-2:1.1
Jun 7 05:05:03 upstairs kernel: PM: Adding info for usb:2-2:1.1
Jun 7 05:05:03 upstairs kernel: device: 'usbdev2.2_ep82': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:usbdev2.2_ep82
Jun 7 05:05:03 upstairs kernel: driver: '2-2': driver_bound: bound to device 'usb'
Jun 7 05:05:03 upstairs kernel: bus: 'usb': really_probe: bound device 2-2 to driver usb
Jun 7 05:05:03 upstairs kernel: device: 'usbdev2.2_ep00': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:usbdev2.2_ep00
Jun 7 05:05:03 upstairs kernel: usb 2-2: New USB device found, idVendor=045e, idProduct=00f1
Jun 7 05:05:03 upstairs kernel: usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jun 7 05:05:03 upstairs kernel: usb 2-2: Product: Microsoft Wireless Desktop Receiver 3.1A
Jun 7 05:05:03 upstairs kernel: usb 2-2: Manufacturer: Microsft
Jun 7 05:05:03 upstairs kernel: driver: '10-0:1.0': driver_bound: bound to device 'hub'
Jun 7 05:05:03 upstairs kernel: bus: 'usb': really_probe: bound device 10-0:1.0 to driver hub
Jun 7 05:05:03 upstairs kernel: device: 'usbdev10.1_ep81': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:usbdev10.1_ep81
Jun 7 05:05:03 upstairs kernel: driver: 'usb10': driver_bound: bound to device 'usb'
Jun 7 05:05:03 upstairs kernel: bus: 'usb': really_probe: bound device usb10 to driver usb
Jun 7 05:05:03 upstairs kernel: device: 'usbdev10.1_ep00': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:usbdev10.1_ep00
Jun 7 05:05:03 upstairs kernel: usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
Jun 7 05:05:03 upstairs kernel: usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 7 05:05:03 upstairs kernel: usb usb10: Product: EHCI Host Controller
Jun 7 05:05:03 upstairs kernel: usb usb10: Manufacturer: Linux 2.6.26-rc5 ehci_hcd
Jun 7 05:05:03 upstairs kernel: usb usb10: SerialNumber: 0000:02:0a.2
Jun 7 05:05:03 upstairs kernel: driver: '0000:02:0a.2': driver_bound: bound to device 'ehci_hcd'
Jun 7 05:05:03 upstairs kernel: bus: 'pci': really_probe: bound device 0000:02:0a.2 to driver ehci_hcd
Jun 7 05:05:03 upstairs kernel: bus: 'pci': driver_probe_device: matched device 0000:02:0a.1 with driver ohci_hcd
Jun 7 05:05:03 upstairs kernel: bus: 'pci': really_probe: probing driver ohci_hcd with device 0000:02:0a.1
Jun 7 05:05:03 upstairs kernel: ACPI: PCI Interrupt 0000:02:0a.1[B] -> GSI 22 (level, low) -> IRQ 22
Jun 7 05:05:03 upstairs kernel: ohci_hcd 0000:02:0a.1: OHCI Host Controller
Jun 7 05:05:03 upstairs kernel: device: 'usb_host11': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:usb_host11
Jun 7 05:05:03 upstairs kernel: ohci_hcd 0000:02:0a.1: new USB bus registered, assigned bus number 11
Jun 7 05:05:03 upstairs kernel: ohci_hcd 0000:02:0a.1: irq 22, io mem 0xfbffe000
Jun 7 05:05:03 upstairs kernel: usb 10-3: new high speed USB device using ehci_hcd and address 2
Jun 7 05:05:03 upstairs kernel: device: '10-3': device_add
Jun 7 05:05:03 upstairs kernel: bus: 'usb': add device 10-3
Jun 7 05:05:03 upstairs kernel: PM: Adding info for usb:10-3
Jun 7 05:05:03 upstairs kernel: bus: 'usb': driver_probe_device: matched device 10-3 with driver usb
Jun 7 05:05:03 upstairs kernel: bus: 'usb': really_probe: probing driver usb with device 10-3
Jun 7 05:05:03 upstairs kernel: usb 10-3: configuration #1 chosen from 1 choice
Jun 7 05:05:03 upstairs kernel: device: '10-3:1.0': device_add
Jun 7 05:05:03 upstairs kernel: bus: 'usb': add device 10-3:1.0
Jun 7 05:05:03 upstairs kernel: PM: Adding info for usb:10-3:1.0
Jun 7 05:05:03 upstairs kernel: bus: 'usb': driver_probe_device: matched device 10-3:1.0 with driver hub
Jun 7 05:05:03 upstairs kernel: bus: 'usb': really_probe: probing driver hub with device 10-3:1.0
Jun 7 05:05:03 upstairs kernel: hub 10-3:1.0: USB hub found
Jun 7 05:05:03 upstairs kernel: hub 10-3:1.0: 4 ports detected
Jun 7 05:05:03 upstairs kernel: driver: '10-3:1.0': driver_bound: bound to device 'hub'
Jun 7 05:05:03 upstairs kernel: bus: 'usb': really_probe: bound device 10-3:1.0 to driver hub
Jun 7 05:05:03 upstairs kernel: device: 'usbdev10.2_ep81': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:usbdev10.2_ep81
Jun 7 05:05:03 upstairs kernel: driver: '10-3': driver_bound: bound to device 'usb'
Jun 7 05:05:03 upstairs kernel: bus: 'usb': really_probe: bound device 10-3 to driver usb
Jun 7 05:05:03 upstairs kernel: device: 'usbdev10.2_ep00': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:usbdev10.2_ep00
Jun 7 05:05:03 upstairs kernel: usb 10-3: New USB device found, idVendor=0409, idProduct=0059
Jun 7 05:05:03 upstairs kernel: usb 10-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jun 7 05:05:03 upstairs kernel: device: 'usb11': device_add
Jun 7 05:05:03 upstairs kernel: bus: 'usb': add device usb11
Jun 7 05:05:03 upstairs kernel: PM: Adding info for usb:usb11
Jun 7 05:05:03 upstairs kernel: bus: 'usb': driver_probe_device: matched device usb11 with driver usb
Jun 7 05:05:03 upstairs kernel: bus: 'usb': really_probe: probing driver usb with device usb11
Jun 7 05:05:03 upstairs kernel: usb usb11: configuration #1 chosen from 1 choice
Jun 7 05:05:03 upstairs kernel: device: '11-0:1.0': device_add
Jun 7 05:05:03 upstairs kernel: bus: 'usb': add device 11-0:1.0
Jun 7 05:05:03 upstairs kernel: PM: Adding info for usb:11-0:1.0
Jun 7 05:05:03 upstairs kernel: bus: 'usb': driver_probe_device: matched device 11-0:1.0 with driver hub
Jun 7 05:05:03 upstairs kernel: bus: 'usb': really_probe: probing driver hub with device 11-0:1.0
Jun 7 05:05:03 upstairs kernel: hub 11-0:1.0: USB hub found
Jun 7 05:05:03 upstairs kernel: hub 11-0:1.0: 2 ports detected
Jun 7 05:05:03 upstairs kernel: driver: '11-0:1.0': driver_bound: bound to device 'hub'
Jun 7 05:05:03 upstairs kernel: bus: 'usb': really_probe: bound device 11-0:1.0 to driver hub
Jun 7 05:05:03 upstairs kernel: device: 'usbdev11.1_ep81': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:usbdev11.1_ep81
Jun 7 05:05:03 upstairs kernel: driver: 'usb11': driver_bound: bound to device 'usb'
Jun 7 05:05:03 upstairs kernel: bus: 'usb': really_probe: bound device usb11 to driver usb
Jun 7 05:05:03 upstairs kernel: device: 'usbdev11.1_ep00': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:usbdev11.1_ep00
Jun 7 05:05:03 upstairs kernel: usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
Jun 7 05:05:03 upstairs kernel: usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 7 05:05:03 upstairs kernel: usb usb11: Product: OHCI Host Controller
Jun 7 05:05:03 upstairs kernel: usb usb11: Manufacturer: Linux 2.6.26-rc5 ohci_hcd
Jun 7 05:05:03 upstairs kernel: usb usb11: SerialNumber: 0000:02:0a.1
Jun 7 05:05:03 upstairs kernel: driver: '0000:02:0a.1': driver_bound: bound to device 'ohci_hcd'
Jun 7 05:05:03 upstairs kernel: bus: 'pci': really_probe: bound device 0000:02:0a.1 to driver ohci_hcd
Jun 7 05:05:03 upstairs kernel: bus: 'pci': driver_probe_device: matched device 0000:02:0b.0 with driver ohci1394
Jun 7 05:05:03 upstairs kernel: bus: 'pci': really_probe: probing driver ohci1394 with device 0000:02:0b.0
Jun 7 05:05:03 upstairs kernel: ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 22 (level, low) -> IRQ 22
Jun 7 05:05:03 upstairs kernel: device: 'fw-host0': device_add
Jun 7 05:05:03 upstairs kernel: bus: 'ieee1394': add device fw-host0
Jun 7 05:05:03 upstairs kernel: PM: Adding info for ieee1394:fw-host0
Jun 7 05:05:03 upstairs kernel: driver: 'fw-host0': driver_bound: bound to device 'nodemgr'
Jun 7 05:05:03 upstairs kernel: device: 'fw-host0': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:fw-host0
Jun 7 05:05:03 upstairs kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fbfff000-fbfff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
Jun 7 05:05:03 upstairs kernel: driver: '0000:02:0b.0': driver_bound: bound to device 'ohci1394'
Jun 7 05:05:03 upstairs kernel: bus: 'pci': really_probe: bound device 0000:02:0b.0 to driver ohci1394
Jun 7 05:05:03 upstairs kernel: bus: 'usb': add driver usbhid
Jun 7 05:05:03 upstairs kernel: bus: 'usb': driver_probe_device: matched device 2-2:1.0 with driver usbhid
Jun 7 05:05:03 upstairs kernel: bus: 'usb': really_probe: probing driver usbhid with device 2-2:1.0
Jun 7 05:05:03 upstairs kernel: bus: 'i2c': registered
Jun 7 05:05:03 upstairs kernel: device class 'i2c-adapter': registering
Jun 7 05:05:03 upstairs kernel: bus: 'i2c': add driver dummy
Jun 7 05:05:03 upstairs kernel: device: 'input2': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:input2
Jun 7 05:05:03 upstairs kernel: input: Microsft Microsoft Wireless Desktop Receiver 3.1A as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input2
Jun 7 05:05:03 upstairs kernel: device: 'event2': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:event2
Jun 7 05:05:03 upstairs kernel: input: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1A] on usb-0000:00:1d.1-2
Jun 7 05:05:03 upstairs kernel: driver: '2-2:1.0': driver_bound: bound to device 'usbhid'
Jun 7 05:05:03 upstairs kernel: bus: 'usb': really_probe: bound device 2-2:1.0 to driver usbhid
Jun 7 05:05:03 upstairs kernel: bus: 'usb': driver_probe_device: matched device 2-2:1.1 with driver usbhid
Jun 7 05:05:03 upstairs kernel: bus: 'usb': really_probe: probing driver usbhid with device 2-2:1.1
Jun 7 05:05:03 upstairs kernel: device class 'firmware': registering
Jun 7 05:05:03 upstairs kernel: device class 'dvb': registering
Jun 7 05:05:03 upstairs kernel: dib0700: loaded with support for 7 different device-types
Jun 7 05:05:03 upstairs kernel: bus: 'usb': add driver dvb_usb_dib0700
Jun 7 05:05:03 upstairs kernel: bus: 'usb': driver_probe_device: matched device 8-1:1.0 with driver dvb_usb_dib0700
Jun 7 05:05:03 upstairs kernel: bus: 'usb': really_probe: probing driver dvb_usb_dib0700 with device 8-1:1.0
Jun 7 05:05:03 upstairs kernel: dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state.
Jun 7 05:05:03 upstairs kernel: device: 'i2c-0': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:i2c-0
Jun 7 05:05:03 upstairs kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Jun 7 05:05:03 upstairs kernel: DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
Jun 7 05:05:03 upstairs kernel: device: 'dvb0.demux0': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:dvb0.demux0
Jun 7 05:05:03 upstairs kernel: device: 'dvb0.dvr0': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:dvb0.dvr0
Jun 7 05:05:03 upstairs kernel: device: 'dvb0.net0': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:dvb0.net0
Jun 7 05:05:03 upstairs kernel: device: 'input3': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:input3
Jun 7 05:05:03 upstairs kernel: input: Microsft Microsoft Wireless Desktop Receiver 3.1A as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.1/input/input3
Jun 7 05:05:03 upstairs kernel: device: 'mouse0': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:mouse0
Jun 7 05:05:03 upstairs kernel: device: 'event3': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:event3
Jun 7 05:05:03 upstairs kernel: input: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1A] on usb-0000:00:1d.1-2
Jun 7 05:05:03 upstairs kernel: driver: '2-2:1.1': driver_bound: bound to device 'usbhid'
Jun 7 05:05:03 upstairs kernel: bus: 'usb': really_probe: bound device 2-2:1.1 to driver usbhid
Jun 7 05:05:03 upstairs kernel: usbcore: registered new interface driver usbhid
Jun 7 05:05:03 upstairs kernel: usbhid: v2.6:USB HID core driver
Jun 7 05:05:03 upstairs kernel: device: 'i2c-1': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:i2c-1
Jun 7 05:05:03 upstairs kernel: DVB: registering frontend 0 (DiBcom 3000MC/P)...
Jun 7 05:05:03 upstairs kernel: device: 'dvb0.frontend0': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:dvb0.frontend0
Jun 7 05:05:03 upstairs kernel: MT2060: successfully identified (IF1 = 1230)
Jun 7 05:05:03 upstairs kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Jun 7 05:05:03 upstairs kernel: DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
Jun 7 05:05:03 upstairs kernel: device: 'dvb1.demux0': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:dvb1.demux0
Jun 7 05:05:03 upstairs kernel: device: 'dvb1.dvr0': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:dvb1.dvr0
Jun 7 05:05:03 upstairs kernel: device: 'dvb1.net0': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:dvb1.net0
Jun 7 05:05:03 upstairs kernel: device: 'i2c-2': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:i2c-2
Jun 7 05:05:03 upstairs kernel: DVB: registering frontend 1 (DiBcom 3000MC/P)...
Jun 7 05:05:03 upstairs kernel: device: 'dvb1.frontend0': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:dvb1.frontend0
Jun 7 05:05:03 upstairs kernel: MT2060: successfully identified (IF1 = 1234)
Jun 7 05:05:03 upstairs kernel: device: '00110666000013cc': device_add
Jun 7 05:05:03 upstairs kernel: bus: 'ieee1394': add device 00110666000013cc
Jun 7 05:05:03 upstairs kernel: PM: Adding info for ieee1394:00110666000013cc
Jun 7 05:05:03 upstairs kernel: device: '00110666000013cc': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:00110666000013cc
Jun 7 05:05:03 upstairs kernel: ieee1394: Host added: ID:BUS[0-00:1023] GUID[00110666000013cc]
Jun 7 05:05:03 upstairs kernel: device: 'input4': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:input4
Jun 7 05:05:03 upstairs kernel: input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1e.0/0000:02:09.2/usb8/8-1/input/input4
Jun 7 05:05:03 upstairs kernel: device: 'event4': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:event4
Jun 7 05:05:03 upstairs kernel: dvb-usb: schedule remote query interval to 150 msecs.
Jun 7 05:05:03 upstairs kernel: dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected.
Jun 7 05:05:03 upstairs kernel: driver: '8-1:1.0': driver_bound: bound to device 'dvb_usb_dib0700'
Jun 7 05:05:03 upstairs kernel: bus: 'usb': really_probe: bound device 8-1:1.0 to driver dvb_usb_dib0700
Jun 7 05:05:03 upstairs kernel: usbcore: registered new interface driver dvb_usb_dib0700
Jun 7 05:05:03 upstairs kernel: fuse init (API version 7.9)
Jun 7 05:05:03 upstairs kernel: device: 'fuse': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:fuse
Jun 7 05:05:03 upstairs kernel: device: '8:1-fuseblk': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:8:1-fuseblk
Jun 7 05:05:03 upstairs kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jun 7 05:05:03 upstairs kernel: kjournald starting. Commit interval 5 seconds
Jun 7 05:05:03 upstairs kernel: EXT3 FS on sdb6, internal journal
Jun 7 05:05:03 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun 7 05:05:03 upstairs kernel: kjournald starting. Commit interval 5 seconds
Jun 7 05:05:03 upstairs kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jun 7 05:05:03 upstairs kernel: EXT3 FS on sda6, internal journal
Jun 7 05:05:03 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun 7 05:05:03 upstairs kernel: kjournald starting. Commit interval 5 seconds
Jun 7 05:05:03 upstairs kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jun 7 05:05:03 upstairs kernel: EXT3 FS on sda7, internal journal
Jun 7 05:05:03 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun 7 05:05:03 upstairs kernel: kjournald starting. Commit interval 5 seconds
Jun 7 05:05:03 upstairs kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jun 7 05:05:03 upstairs kernel: EXT3 FS on sdc2, internal journal
Jun 7 05:05:03 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun 7 05:05:03 upstairs kernel: Adding 4096532k swap on /dev/sda5. Priority:-1 extents:1 across:4096532k
Jun 7 05:05:03 upstairs kernel: device: 'vcs1': device_unregister
Jun 7 05:05:03 upstairs kernel: PM: Removing info for No Bus:vcs1
Jun 7 05:05:03 upstairs kernel: device: 'vcs1': device_create_release
Jun 7 05:05:03 upstairs kernel: device: 'vcsa1': device_unregister
Jun 7 05:05:03 upstairs kernel: PM: Removing info for No Bus:vcsa1
Jun 7 05:05:03 upstairs kernel: device: 'vcsa1': device_create_release
Jun 7 05:05:03 upstairs kernel: device: 'vcs1': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:vcs1
Jun 7 05:05:03 upstairs kernel: device: 'vcsa1': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:vcsa1
Jun 7 05:05:03 upstairs kernel: device: 'vcs1': device_unregister
Jun 7 05:05:03 upstairs kernel: PM: Removing info for No Bus:vcs1
Jun 7 05:05:03 upstairs kernel: device: 'vcs1': device_create_release
Jun 7 05:05:03 upstairs kernel: device: 'vcsa1': device_unregister
Jun 7 05:05:03 upstairs kernel: PM: Removing info for No Bus:vcsa1
Jun 7 05:05:03 upstairs kernel: device: 'vcsa1': device_create_release
Jun 7 05:05:03 upstairs kernel: device: 'vcs1': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:vcs1
Jun 7 05:05:03 upstairs kernel: device: 'vcsa1': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:vcsa1
Jun 7 05:05:03 upstairs kernel: device: 'vcs1': device_unregister
Jun 7 05:05:03 upstairs kernel: PM: Removing info for No Bus:vcs1
Jun 7 05:05:03 upstairs kernel: device: 'vcs1': device_create_release
Jun 7 05:05:03 upstairs kernel: device: 'vcsa1': device_unregister
Jun 7 05:05:03 upstairs kernel: PM: Removing info for No Bus:vcsa1
Jun 7 05:05:03 upstairs kernel: device: 'vcsa1': device_create_release
Jun 7 05:05:03 upstairs kernel: device: 'vcs1': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:vcs1
Jun 7 05:05:03 upstairs kernel: device: 'vcsa1': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:vcsa1
Jun 7 05:05:03 upstairs kernel: device: 'vcs1': device_unregister
Jun 7 05:05:03 upstairs kernel: PM: Removing info for No Bus:vcs1
Jun 7 05:05:03 upstairs kernel: device: 'vcs1': device_create_release
Jun 7 05:05:03 upstairs kernel: device: 'vcsa1': device_unregister
Jun 7 05:05:03 upstairs kernel: PM: Removing info for No Bus:vcsa1
Jun 7 05:05:03 upstairs kernel: device: 'vcsa1': device_create_release
Jun 7 05:05:03 upstairs kernel: device: 'vcs1': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:vcs1
Jun 7 05:05:03 upstairs kernel: device: 'vcsa1': device_add
Jun 7 05:05:03 upstairs kernel: PM: Adding info for No Bus:vcsa1
Jun 7 05:05:03 upstairs kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Jun 7 05:05:03 upstairs kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jun 7 05:05:03 upstairs kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Jun 7 05:05:03 upstairs kernel: bus: 'pci': remove driver parport_pc
Jun 7 05:05:03 upstairs kernel: driver: 'parport_pc': driver_release
Jun 7 05:05:03 upstairs kernel: bus: 'pnp': remove driver parport_pc
Jun 7 05:05:03 upstairs kernel: parport_pc 00:06: disabled
Jun 7 05:05:03 upstairs kernel: driver: 'parport_pc': driver_release
Jun 7 05:05:06 upstairs kernel: pnp: the driver 'parport_pc' has been unregistered
Jun 7 05:05:06 upstairs kernel: bus: 'platform': remove driver parport_pc
Jun 7 05:05:06 upstairs kernel: driver: 'parport_pc': driver_release
Jun 7 05:05:06 upstairs kernel: bus: 'pci': remove driver ohci1394
Jun 7 05:05:06 upstairs kernel: ieee1394: Node removed: ID:BUS[0-00:1023] GUID[00110666000013cc]
Jun 7 05:05:06 upstairs kernel: device: '00110666000013cc': device_unregister
Jun 7 05:05:06 upstairs kernel: PM: Removing info for No Bus:00110666000013cc
Jun 7 05:05:06 upstairs kernel: device: '00110666000013cc': device_unregister
Jun 7 05:05:06 upstairs kernel: PM: Removing info for ieee1394:00110666000013cc
Jun 7 05:05:06 upstairs kernel: bus: 'ieee1394': remove device 00110666000013cc
Jun 7 05:05:06 upstairs kernel: device: 'fw-host0': device_unregister
Jun 7 05:05:06 upstairs kernel: PM: Removing info for No Bus:fw-host0
Jun 7 05:05:06 upstairs kernel: device: 'fw-host0': device_unregister
Jun 7 05:05:06 upstairs kernel: PM: Removing info for ieee1394:fw-host0
Jun 7 05:05:06 upstairs kernel: bus: 'ieee1394': remove device fw-host0
Jun 7 05:05:06 upstairs kernel: driver: 'ohci1394': driver_release
Jun 7 05:05:06 upstairs kernel: bus: 'ieee1394': remove driver nodemgr
Jun 7 05:05:06 upstairs kernel: driver: 'nodemgr': driver_release
Jun 7 05:05:06 upstairs kernel: device class 'ieee1394': unregistering
Jun 7 05:05:06 upstairs kernel: class 'ieee1394': release.
Jun 7 05:05:06 upstairs kernel: class 'ieee1394' does not have a release() function, be careful
Jun 7 05:05:06 upstairs kernel: device class 'ieee1394_node': unregistering
Jun 7 05:05:06 upstairs kernel: class 'ieee1394_node': release.
Jun 7 05:05:06 upstairs kernel: class 'ieee1394_node' does not have a release() function, be careful
Jun 7 05:05:06 upstairs kernel: device class 'ieee1394_protocol': unregistering
Jun 7 05:05:06 upstairs kernel: class 'ieee1394_protocol': release.
Jun 7 05:05:06 upstairs kernel: class_create_release called for ieee1394_protocol
Jun 7 05:05:06 upstairs kernel: device class 'ieee1394_host': unregistering
Jun 7 05:05:06 upstairs kernel: class 'ieee1394_host': release.
Jun 7 05:05:06 upstairs kernel: class 'ieee1394_host' does not have a release() function, be careful
Jun 7 05:05:06 upstairs kernel: bus: 'ieee1394': unregistering
Jun 7 05:05:06 upstairs kernel: device: 'vcs3': device_add
Jun 7 05:05:06 upstairs kernel: PM: Adding info for No Bus:vcs3
Jun 7 05:05:06 upstairs kernel: device: 'vcsa3': device_add
Jun 7 05:05:06 upstairs kernel: PM: Adding info for No Bus:vcsa3
Jun 7 05:05:06 upstairs kernel: device: 'vcs2': device_add
Jun 7 05:05:06 upstairs kernel: PM: Adding info for No Bus:vcs2
Jun 7 05:05:06 upstairs kernel: device: 'vcsa2': device_add
Jun 7 05:05:06 upstairs kernel: PM: Adding info for No Bus:vcsa2
Jun 7 05:05:06 upstairs kernel: device: 'vcs4': device_add
Jun 7 05:05:06 upstairs kernel: PM: Adding info for No Bus:vcs4
Jun 7 05:05:06 upstairs kernel: device: 'vcsa4': device_add
Jun 7 05:05:06 upstairs kernel: PM: Adding info for No Bus:vcsa4
Jun 7 05:05:06 upstairs kernel: device: 'vcs5': device_add
Jun 7 05:05:06 upstairs kernel: PM: Adding info for No Bus:vcs5
Jun 7 05:05:06 upstairs kernel: device: 'vcsa5': device_add
Jun 7 05:05:06 upstairs kernel: PM: Adding info for No Bus:vcsa5

Next message: Roland Dreier: "[PATCH] IB/umem: Avoid sign problems when demoting npages to integer"
Previous message: Andrey Panin: "Re: [PATCH] Add backlight driver for Nvidia-based Apple MacbookPros"
In reply to: James Bottomley: "Re: 2,6.26-rc4-git2 - long pause during boot"
Next in thread: James Bottomley: "Re: 2,6.26-rc4-git2 - long pause during boot"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]