Re: kernel 2.6.25 with ide driver cs5520 does not boot.

[Bartlomiej Zolnierkiewicz]

On Friday 30 May 2008, TAKADA Yoshihito wrote:
> From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
> Subject: Re: kernel 2.6.25 with ide driver cs5520 does not boot.
> Date: Thu, 15 May 2008 00:28:04 +0200
> 
> Hi. sorry, I'm too late.
> I tested the patch to re-enable DMA. But, this patch has no effect. It cannot boot.
> printk() message disappeared.

Now I'm late. ;-)

Thanks for info, I'll later prepare patch removing IDE_HFLAG_VDMA & co.

> > On Wednesday 14 May 2008, Bartlomiej Zolnierkiewicz wrote:
> > > On Friday 09 May 2008, TAKADA Yoshihito wrote:
> > > > Hi.
> > > > 
> > > > From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
> > > > Subject: Re: kernel 2.6.25 with ide driver cs5520 does not boot.
> > > > Date: Fri, 9 May 2008 11:27:53 +0200
> > > > 
> > > > > On Friday 09 May 2008, TAKADA Yoshihito wrote:
> > > > > > Thanks for quick reply.
> > > > > > 
> > > > > > I tried 2.6.26rc1. It hangs same as 2.6.25.
> > > > > > kernel 2.6.26rc1 with cs5520 cannot boot. cs5520 scans ide0 and ide1.
> > > > > > It seems 2nd port DMA base issue was solved.
> > > > > 
> > > > > [...]
> > > > > 
> > > > > Thanks.
> > > > > 
> > > > > The following patch for 2.6.26-rc1 disables VDMA, please give it a try
> > > > > (I haven't time to fully audit VDMA support yet but lets see if it is
> > > > > the main source of the problems).
> > > > 
> > > > I applied the patch. But kernel was hung.
> > > > And I attempt to kill IDE_HFLAG_CS5520. It cannot boot, oo.
> > > > 
> > > >   kill IDE_HFLAG_VDMA  : hang  
> > > >   kill IDE_HFLAG_CS5520: hang
> > > >   kill both flags      : boot
> > > 
> > > Thanks for investigating this - I forgot that currently VDMA and CS5520
> > > host flags use the same bit (so it also needs to be fixed).
> > > 
> > > I'm going to send the following patch to Linus (please verify it):
> > > 
> > > From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
> > > Subject: [PATCH] cs5520: disable VDMA
> > 
> > [...]
> > 
> > Please also try 2.6.26-rc2 without the above patch but with the following
> > patch applied instead - according to comments in OpenFirmware & pata_cs5520
> > code 0x60 register contains bus-master enable bit, it could be that it was
> > left disabled by BIOS and we need to explicitely enable it (if somebody has
> > CX5510 or CX5520 datasheet please verify this + send me a copy if possible).
> > 
> > ---
> >  drivers/ide/pci/cs5520.c |    8 ++++++++
> >  1 file changed, 8 insertions(+)
> > 
> > Index: b/drivers/ide/pci/cs5520.c
> > ===================================================================
> > --- a/drivers/ide/pci/cs5520.c
> > +++ b/drivers/ide/pci/cs5520.c
> > @@ -147,6 +147,7 @@ static int __devinit cs5520_init_one(str
> >  {
> >  	const struct ide_port_info *d = &cyrix_chipsets[id->driver_data];
> >  	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
> > +	u8 pcicfg;
> >  
> >  	ide_setup_pci_noise(dev, d);
> >  
> > @@ -163,6 +164,13 @@ static int __devinit cs5520_init_one(str
> >  		return -ENODEV;
> >  	}
> >  
> > +	pci_read_config_byte(dev, 0x60, &pcicfg);
> > +
> > +	if ((pcicfg & 0x40) == 0) {
> > +		printk(KERN_WARNING "cs5520: DMA mode disabled. Enabling.\n");
> > +		pci_write_config_byte(dev, 0x60, pcicfg | 0x40);
> > +	}
> > +
> >  	/*
> >  	 *	Now the chipset is configured we can let the core
> >  	 *	do all the device setup for us
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/