[PATCH 11/18] ide-cd: move request prep from cdrom_start_rw_cont to rq issue path

[Borislav Petkov]

... by factoring out the rq preparation code into a separate
function called in the request routine. Bart: As a nice
side effect, this minimizes the IRQ handler execution time.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@xxxxxxxxx>
---
 drivers/ide/ide-cd.c |   29 ++++++++++++++++++++---------
 1 files changed, 20 insertions(+), 9 deletions(-)

diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index da0f28c..a5715b1 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -691,16 +691,9 @@ static int ide_cd_check_transfer_size(ide_drive_t *drive, int len)
 
 static ide_startstop_t cdrom_newpc_intr(ide_drive_t *);
 
-/*
- * Routine to send a read/write packet command to the drive. This is usually
- * called directly from cdrom_start_{read,write}(). However, for drq_interrupt
- * devices, it is called from an interrupt when the drive is ready to accept
- * the command.
- */
-static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive)
+static ide_startstop_t ide_cd_prepare_rw_request(ide_drive_t *drive,
+						 struct request *rq)
 {
-	struct request *rq = HWGROUP(drive)->rq;
-
 	if (rq_data_dir(rq) == READ) {
 		unsigned short sectors_per_frame =
 			queue_hardsect_size(drive->queue) >> SECTOR_BITS;
@@ -737,6 +730,19 @@ static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive)
 	/* set up the command */
 	rq->timeout = ATAPI_WAIT_PC;
 
+	return ide_started;
+}
+
+/*
+ * Routine to send a read/write packet command to the drive. This is usually
+ * called directly from cdrom_start_{read,write}(). However, for drq_interrupt
+ * devices, it is called from an interrupt when the drive is ready to accept
+ * the command.
+ */
+static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive)
+{
+	struct request *rq = HWGROUP(drive)->rq;
+
 	/* send the command to the drive and return */
 	return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr);
 }
@@ -1238,10 +1244,15 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
 		} else {
 			xferlen = 32768;
 			fn = cdrom_start_rw_cont;
+
 			if (cdrom_start_rw(drive, rq) == ide_stopped)
 				return ide_stopped;
+
+			if (ide_cd_prepare_rw_request(drive, rq) == ide_stopped)
+				return ide_stopped;
 		}
 		info->last_block = block;
+
 	} else if (blk_sense_request(rq) || blk_pc_request(rq) ||
 		   rq->cmd_type == REQ_TYPE_ATA_PC) {
 		xferlen = rq->data_len;
-- 
1.5.5.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/