[patch 5/5] x86 PCI: use dev_printk when possible
From: Bjorn Helgaas
Date: Fri Jun 13 2008 - 12:54:59 EST
Convert printks to use dev_printk().
I converted DBG() to dev_dbg(). This DBG() is from arch/x86/pci/pci.h
and requires source-code modification to enable, so dev_dbg() seems
roughly equivalent.
The printks in arch/x86/pci/irq.c were a little hairy, with lines
printed in several pieces. I straightened it out a little, but
another set of eyes would be good.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@xxxxxx>
---
arch/x86/pci/fixup.c | 3 +
arch/x86/pci/i386.c | 26 ++++++--------
arch/x86/pci/irq.c | 91 ++++++++++++++++++++++-----------------------------
arch/x86/pci/numa.c | 5 +-
4 files changed, 57 insertions(+), 68 deletions(-)
Index: work11/arch/x86/pci/fixup.c
===================================================================
--- work11.orig/arch/x86/pci/fixup.c 2008-06-12 16:53:49.000000000 -0600
+++ work11/arch/x86/pci/fixup.c 2008-06-13 09:52:12.000000000 -0600
@@ -23,7 +23,8 @@ static void __devinit pci_fixup_i450nx(s
pci_read_config_byte(d, reg++, &busno);
pci_read_config_byte(d, reg++, &suba);
pci_read_config_byte(d, reg++, &subb);
- DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
+ dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno,
+ suba, subb);
if (busno)
pci_scan_bus_with_sysdata(busno); /* Bus A */
if (suba < subb)
Index: work11/arch/x86/pci/i386.c
===================================================================
--- work11.orig/arch/x86/pci/i386.c 2008-06-12 16:53:49.000000000 -0600
+++ work11/arch/x86/pci/i386.c 2008-06-13 09:52:12.000000000 -0600
@@ -128,10 +128,8 @@ static void __init pcibios_allocate_bus_
pr = pci_find_parent_resource(dev, r);
if (!r->start || !pr ||
request_resource(pr, r) < 0) {
- printk(KERN_ERR "PCI: Cannot allocate "
- "resource region %d "
- "of bridge %s\n",
- idx, pci_name(dev));
+ dev_err(&dev->dev, "BAR %d: can't "
+ "allocate resource\n", idx);
/*
* Something is wrong with the region.
* Invalidate the resource to prevent
@@ -166,15 +164,15 @@ static void __init pcibios_allocate_reso
else
disabled = !(command & PCI_COMMAND_MEMORY);
if (pass == disabled) {
- DBG("PCI: Resource %08lx-%08lx "
- "(f=%lx, d=%d, p=%d)\n",
- r->start, r->end, r->flags, disabled, pass);
+ dev_dbg(&dev->dev, "resource %#08llx-%#08llx "
+ "(f=%lx, d=%d, p=%d)\n",
+ (unsigned long long) r->start,
+ (unsigned long long) r->end,
+ r->flags, disabled, pass);
pr = pci_find_parent_resource(dev, r);
if (!pr || request_resource(pr, r) < 0) {
- printk(KERN_ERR "PCI: Cannot allocate "
- "resource region %d "
- "of device %s\n",
- idx, pci_name(dev));
+ dev_err(&dev->dev, "BAR %d: can't "
+ "allocate resource\n", idx);
/* We'll assign a new address later */
r->end -= r->start;
r->start = 0;
@@ -187,8 +185,7 @@ static void __init pcibios_allocate_reso
/* Turn the ROM off, leave the resource region,
* but keep it unregistered. */
u32 reg;
- DBG("PCI: Switching off ROM of %s\n",
- pci_name(dev));
+ dev_dbg(&dev->dev, "disabling ROM\n");
r->flags &= ~IORESOURCE_ROM_ENABLE;
pci_read_config_dword(dev,
dev->rom_base_reg, ®);
@@ -257,8 +254,7 @@ void pcibios_set_master(struct pci_dev *
lat = pcibios_max_latency;
else
return;
- printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n",
- pci_name(dev), lat);
+ dev_printk(KERN_DEBUG, &dev->dev, "setting latency timer to %d\n", lat);
pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
}
Index: work11/arch/x86/pci/irq.c
===================================================================
--- work11.orig/arch/x86/pci/irq.c 2008-06-12 16:53:49.000000000 -0600
+++ work11/arch/x86/pci/irq.c 2008-06-13 09:52:12.000000000 -0600
@@ -433,7 +433,7 @@ static int pirq_vlsi_get(struct pci_dev
{
WARN_ON_ONCE(pirq >= 9);
if (pirq > 8) {
- printk(KERN_INFO "VLSI router pirq escape (%d)\n", pirq);
+ dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq);
return 0;
}
return read_config_nybble(router, 0x74, pirq-1);
@@ -443,7 +443,7 @@ static int pirq_vlsi_set(struct pci_dev
{
WARN_ON_ONCE(pirq >= 9);
if (pirq > 8) {
- printk(KERN_INFO "VLSI router pirq escape (%d)\n", pirq);
+ dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq);
return 0;
}
write_config_nybble(router, 0x74, pirq-1, irq);
@@ -487,22 +487,18 @@ static int pirq_amd756_get(struct pci_de
u8 irq;
irq = 0;
if (pirq <= 4)
- {
irq = read_config_nybble(router, 0x56, pirq - 1);
- }
- printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d get irq : %2d\n",
+ dev_info(&dev->dev, "AMD756: dev [%04x/%04x], router PIRQ %d get IRQ %d\n",
dev->vendor, dev->device, pirq, irq);
return irq;
}
static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
{
- printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n",
+ dev_info(&dev->dev, "AMD756: dev [%04x/%04x], router PIRQ %d set IRQ %d\n",
dev->vendor, dev->device, pirq, irq);
if (pirq <= 4)
- {
write_config_nybble(router, 0x56, pirq - 1, irq);
- }
return 1;
}
@@ -736,7 +732,6 @@ static __init int ali_router_probe(struc
{
case PCI_DEVICE_ID_AL_M1533:
case PCI_DEVICE_ID_AL_M1563:
- printk(KERN_DEBUG "PCI: Using ALI IRQ Router\n");
r->name = "ALI";
r->get = pirq_ali_get;
r->set = pirq_ali_set;
@@ -845,11 +840,9 @@ static void __init pirq_find_router(stru
if (pirq_router_dev->vendor == h->vendor && h->probe(r, pirq_router_dev, pirq_router_dev->device))
break;
}
- printk(KERN_INFO "PCI: Using IRQ router %s [%04x/%04x] at %s\n",
- pirq_router.name,
- pirq_router_dev->vendor,
- pirq_router_dev->device,
- pci_name(pirq_router_dev));
+ dev_info(&pirq_router_dev->dev, "%s IRQ router [%04x/%04x]\n",
+ pirq_router.name,
+ pirq_router_dev->vendor, pirq_router_dev->device);
/* The device remains referenced for the kernel lifetime */
}
@@ -880,7 +873,7 @@ static int pcibios_lookup_irq(struct pci
/* Find IRQ pin */
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
if (!pin) {
- DBG(KERN_DEBUG " -> no interrupt pin\n");
+ dev_dbg(&dev->dev, "no interrupt pin\n");
return 0;
}
pin = pin - 1;
@@ -889,20 +882,21 @@ static int pcibios_lookup_irq(struct pci
if (!pirq_table)
return 0;
-
- DBG(KERN_DEBUG "IRQ for %s[%c]", pci_name(dev), 'A' + pin);
+
info = pirq_get_info(dev);
if (!info) {
- DBG(" -> not found in routing table\n" KERN_DEBUG);
+ dev_dbg(&dev->dev, "PCI INT%c# not found in routing table\n",
+ 'A' + pin);
return 0;
}
pirq = info->irq[pin].link;
mask = info->irq[pin].bitmap;
if (!pirq) {
- DBG(" -> not routed\n" KERN_DEBUG);
+ dev_dbg(&dev->dev, "PCI INT%c# not routed\n", 'A' + pin);
return 0;
}
- DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask, pirq_table->exclusive_irqs);
+ dev_dbg(&dev->dev, "PCI INT%c# -> PIRQ %02x, mask %04x, excl %04x",
+ 'A' + pin, pirq, mask, pirq_table->exclusive_irqs);
mask &= pcibios_irq_mask;
/* Work around broken HP Pavilion Notebooks which assign USB to
@@ -928,11 +922,11 @@ static int pcibios_lookup_irq(struct pci
*/
newirq = dev->irq;
if (newirq && !((1 << newirq) & mask)) {
- if ( pci_probe & PCI_USE_PIRQ_MASK) newirq = 0;
- else printk("\n" KERN_WARNING
- "PCI: IRQ %i for device %s doesn't match PIRQ mask "
- "- try pci=usepirqmask\n" KERN_DEBUG, newirq,
- pci_name(dev));
+ if (pci_probe & PCI_USE_PIRQ_MASK)
+ newirq = 0;
+ else
+ dev_warn(&dev->dev, "IRQ %d doesn't match PIRQ mask "
+ "%#x; try pci=usepirqmask\n", newirq, mask);
}
if (!newirq && assign) {
for (i = 0; i < 16; i++) {
@@ -942,37 +936,32 @@ static int pcibios_lookup_irq(struct pci
newirq = i;
}
}
- DBG(" -> newirq=%d", newirq);
+ dev_dbg(&dev->dev, "PCI INT%c# -> newirq %d", 'A' + pin, newirq);
/* Check if it is hardcoded */
if ((pirq & 0xf0) == 0xf0) {
irq = pirq & 0xf;
- DBG(" -> hardcoded IRQ %d\n", irq);
- msg = "Hardcoded";
+ msg = "hardcoded";
} else if ( r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \
((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask)) ) {
- DBG(" -> got IRQ %d\n", irq);
- msg = "Found";
+ msg = "found";
eisa_set_level_irq(irq);
} else if (newirq && r->set && (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
- DBG(" -> assigning IRQ %d", newirq);
if (r->set(pirq_router_dev, dev, pirq, newirq)) {
eisa_set_level_irq(newirq);
- DBG(" ... OK\n");
- msg = "Assigned";
+ msg = "assigned";
irq = newirq;
}
}
if (!irq) {
- DBG(" ... failed\n");
if (newirq && mask == (1 << newirq)) {
- msg = "Guessed";
+ msg = "guessed";
irq = newirq;
} else
return 0;
}
- printk(KERN_INFO "PCI: %s IRQ %d for device %s\n", msg, irq, pci_name(dev));
+ dev_info(&dev->dev, "%s PCI INT%c# -> IRQ %d\n", msg, 'A' + pin, irq);
/* Update IRQ for all devices with the same pirq value */
while ((dev2 = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev2)) != NULL) {
@@ -989,15 +978,17 @@ static int pcibios_lookup_irq(struct pci
(!(pci_probe & PCI_USE_PIRQ_MASK) || \
((1 << dev2->irq) & mask)) ) {
#ifndef CONFIG_PCI_MSI
- printk(KERN_INFO "IRQ routing conflict for %s, have irq %d, want irq %d\n",
- pci_name(dev2), dev2->irq, irq);
+ dev_info(&dev2->dev, "IRQ routing conflict: "
+ "have IRQ %d, want IRQ %d\n",
+ dev2->irq, irq);
#endif
continue;
}
dev2->irq = irq;
pirq_penalty[irq]++;
if (dev != dev2)
- printk(KERN_INFO "PCI: Sharing IRQ %d with %s\n", irq, pci_name(dev2));
+ dev_info(&dev->dev, "sharing IRQ %d with %s\n",
+ irq, pci_name(dev2));
}
}
return 1;
@@ -1015,7 +1006,7 @@ static void __init pcibios_fixup_irqs(vo
* Also keep track of which IRQ's are already in use.
*/
if (dev->irq >= 16) {
- DBG(KERN_DEBUG "%s: ignoring bogus IRQ %d\n", pci_name(dev), dev->irq);
+ dev_dbg(&dev->dev, "ignoring bogus IRQ %d\n", dev->irq);
dev->irq = 0;
}
/* If the IRQ is already assigned to a PCI device, ignore its ISA use penalty */
@@ -1051,12 +1042,12 @@ static void __init pcibios_fixup_irqs(vo
irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
PCI_SLOT(bridge->devfn), pin);
if (irq >= 0)
- printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n",
- pci_name(bridge), 'A' + pin, irq);
+ dev_warn(&dev->dev, "using bridge %s INT%c# to get IRQ %d\n",
+ pci_name(bridge), 'A' + pin, irq);
}
if (irq >= 0) {
- printk(KERN_INFO "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
- pci_name(dev), 'A' + pin, irq);
+ dev_info(&dev->dev, "PCI->APIC IRQ transform: INT%c# -> IRQ %d\n",
+ 'A' + pin, irq);
dev->irq = irq;
}
}
@@ -1209,14 +1200,14 @@ static int pirq_enable_irq(struct pci_de
irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
PCI_SLOT(bridge->devfn), pin);
if (irq >= 0)
- printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n",
- pci_name(bridge), 'A' + pin, irq);
+ dev_warn(&dev->dev, "using bridge %s INT%c# to get IRQ %d\n",
+ pci_name(bridge), 'A' + pin, irq);
dev = bridge;
}
dev = temp_dev;
if (irq >= 0) {
- printk(KERN_INFO "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
- pci_name(dev), 'A' + pin, irq);
+ dev_info(&dev->dev, "PCI->APIC IRQ transform: INT%c# -> IRQ %d\n",
+ 'A' + pin, irq);
dev->irq = irq;
return 0;
} else
@@ -1230,8 +1221,8 @@ static int pirq_enable_irq(struct pci_de
if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE && !(dev->class & 0x5))
return 0;
- printk(KERN_WARNING "PCI: No IRQ known for interrupt pin %c of device %s.%s\n",
- 'A' + pin, pci_name(dev), msg);
+ dev_warn(&dev->dev, "no IRQ known for INT%c#. %s\n",
+ 'A' + pin, msg);
}
return 0;
}
Index: work11/arch/x86/pci/numa.c
===================================================================
--- work11.orig/arch/x86/pci/numa.c 2008-06-12 16:53:49.000000000 -0600
+++ work11/arch/x86/pci/numa.c 2008-06-13 09:52:12.000000000 -0600
@@ -155,13 +155,14 @@ static void __devinit pci_fixup_i450nx(s
u8 busno, suba, subb;
int quad = BUS2QUAD(d->bus->number);
- printk("PCI: Searching for i450NX host bridges on %s\n", pci_name(d));
+ dev_info(&d->dev, "searching for i450NX host bridges\n");
reg = 0xd0;
for(pxb=0; pxb<2; pxb++) {
pci_read_config_byte(d, reg++, &busno);
pci_read_config_byte(d, reg++, &suba);
pci_read_config_byte(d, reg++, &subb);
- DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
+ dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n",
+ pxb, busno, suba, subb);
if (busno) {
/* Bus A */
pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, busno));
--
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/