Re: [v4l-dvb-maintainer] saa7134 duplicate device in module, butdifferent device_data?

From: hermann pitton
Date: Thu Jun 26 2008 - 21:02:43 EST



Am Donnerstag, den 26.06.2008, 20:06 -0400 schrieb Ben Collins:
> On Fri, 2008-06-27 at 01:56 +0200, hermann pitton wrote:
> > Hello,
> >
> > Am Donnerstag, den 26.06.2008, 13:24 -0400 schrieb Ben Collins:
> > > In the saa7134 module, there are these two entries in
> > > MODULE_DEVICE_TABLE():
> > >
> > >
> > > },{
> > > .vendor = PCI_VENDOR_ID_PHILIPS,
> > > .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
> > > .subvendor = 0x185b,
> > > .subdevice = 0xc100,
> > > .driver_data = SAA7134_BOARD_VIDEOMATE_TV,
> > > },{
> > > .vendor = PCI_VENDOR_ID_PHILIPS,
> > > .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
> > > .subvendor = 0x185b,
> > > .subdevice = 0xc100,
> > > .driver_data = SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUS,
> > > },{
> > >
> > > Both will exactly match, and I assume only the first one will ever be
> > > used, hence the second is just a wasted dupe. At least, I would assume
> > > if not for the differing driver_data. Anyway to clear up this ambiguity?
> > >
> >
> > there are even more devices with the same PCI device and subsystem ID
> > from that vendor and the problem goes also over saa7133 and saa7135
> > devices, for which we have no means to detect them as different, but the
> > saa7133 does only NTSC-M system TV sound decoding and saa7135 and the
> > even later saa7131e global analog TV sound.
> >
> > For the early saa7133 SAA7134_BOARD_VIDEOMATE_TV we don't have eeprom
> > readout data and the contributor doesn't have the card anymore.
> > A request for helping out with such on the list had no result so far.
> >
> > As of now, we can't try to separate them by eeprom differences, which
> > would be the best attempt and is done for some other Compro products
> > with similar flaws already.
> >
> > Before that likely possible eeprom detection ever happens, we have two
> > options left to make you feel better.
> >
> > Kick both out of the auto detection and the users will get a list of
> > supported devices printed out, from which they have to choose.
> >
> > Leave the oldest one in and print some warnings that they have to look
> > it up for their newer cards. Naming is quite consistent, except some
> > early Gold Plus II variants seen first in New Zealand coming with Gold
> > Plus only stickers. They also come with different tuners, latest have a
> > separate silicon radio tuner and all such usual ...
> >
> > Patches are always welcome.
> >
> > Internally it was only a reminder for missing eeprom data to be
> > investigated.
>
> Well I was thinking that mainly, this was just a table for loading and
> binding the driver with a device. In that case, only one entry is
> needed. The probing would have to decide which device it is.
>
> I'm not up for suggesting a fix, because I don't know enough about the
> background. This email is just a friendly reminder that there exists
> ambiguity, and at least for one of these devices, the driver isn't going
> to detect it properly anyway :)
>

I do agree and will be happy with any patch you provide to get it out of
sight ;)

Comes back to mind, there is another Compro one on M systems with a NEC
"deghoster", converting to s-video for that and hence hangs on unusally
TV vmux 7.

All through so far, but not on the ground enough, since users went away,
after they have it working ...

Cheers,
Hermann



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/