Re: [Bug #10868] Oops on loading ipaq module since 2.6.26,prevents use of device

[Adam Williamson]

On Mon, 2008-06-30 at 15:09 +0200, Oliver Neukum wrote:
> Am Freitag 27 Juni 2008 21:28:54 schrieb Adam Williamson:
> > On Wed, 2008-06-25 at 17:41 +0200, Oliver Neukum wrote:
> > > Am Mittwoch 25 Juni 2008 04:05:13 schrieb Adam Williamson:
> > > > On Mon, 2008-06-23 at 20:41 +0200, Oliver Neukum wrote:
> > > > 
> > > > > It is the module option "debug" for usb-serial.
> > > > 
> > > > OK, here you go:
> > > 
> > > Please also set the debug module parameter for the ipaq module.
> > 
> > OK.
> 
> Your device is considered to have two ports but not enough endpoints.
> Please provide the output of "lsusb -v"

Here's the lsusb stanza for the device.
-- 
adamw
Bus 003 Device 002: ID 03f0:1016 Hewlett-Packard Jornada 548 / iPAQ HW6515 Pocket PC 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.00
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass       255 Vendor Specific Subclass
  bDeviceProtocol       255 Vendor Specific Protocol
  bMaxPacketSize0        16
  idVendor           0x03f0 Hewlett-Packard
  idProduct          0x1016 Jornada 548 / iPAQ HW6515 Pocket PC 
  bcdDevice            0.00
  iManufacturer           0 
  iProduct                0 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower               50mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
Device Status:     0x0000
  (Bus Powered)