[PATCH] mfd: let asic3 use mem resource instead of bus_shift

From: Philipp Zabel
Date: Sat Jul 05 2008 - 16:20:20 EST


The bus_shift parameter in platform_data is not needed
as we can tell the driver with the IOMEM_RESOURCE whether
the ASIC is located on a 16bit or 32bit memory bus.

bus_shift as a configuration parameter is confusing at best
because sometimes it means "shift register number left by n bits",
sometimes it means "shift 32bit register address right by n bits"
(see asic->bus_shift = 2 - pdata->bus_shift ...).

The htc-egpio driver uses a more descriptive bus_width parameter,
but for drivers where the register map size is fixed, we don't even
need this. With this patch, the asic3 driver will calculate its
bus_shift from the memory resource size (ïASIC3_MAP_SIZE_16BIT or
ASIC3_MAP_SIZE_32BIT).

Signed-off-by: Philipp Zabel <philipp.zabel@xxxxxxxxx>
---
drivers/mfd/asic3.c | 11 +++++------
include/linux/mfd/asic3.h | 3 ++-
2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index f2fb233..3b870e7 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -313,6 +313,7 @@ static int __init asic3_irq_probe(struct platform_device *pdev)
struct asic3 *asic = platform_get_drvdata(pdev);
unsigned long clksel = 0;
unsigned int irq, irq_base;
+ int map_size;

asic->irq_nr = platform_get_irq(pdev, 0);
if (asic->irq_nr < 0)
@@ -551,8 +552,8 @@ static int __init asic3_probe(struct platform_device *pdev)
goto out_free;
}

-
- asic->mapping = ioremap(mem->start, PAGE_SIZE);
+ map_size = mem->end - mem->start + 1;
+ asic->mapping = ioremap(mem->start, map_size);
if (!asic->mapping) {
ret = -ENOMEM;
dev_err(asic->dev, "Couldn't ioremap\n");
@@ -561,10 +562,8 @@ static int __init asic3_probe(struct platform_device *pdev)

asic->irq_base = pdata->irq_base;

- if (pdata && pdata->bus_shift)
- asic->bus_shift = 2 - pdata->bus_shift;
- else
- asic->bus_shift = 0;
+ /* calculate bus shift from mem resource */
+ asic->bus_shift = 2 - (map_size >> 12);

clksel = 0;
asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL), clksel);
diff --git a/include/linux/mfd/asic3.h b/include/linux/mfd/asic3.h
index 8f8c46c..2de526a 100644
--- a/include/linux/mfd/asic3.h
+++ b/include/linux/mfd/asic3.h
@@ -498,6 +498,7 @@ struct asic3_platform_data {
#define ASIC3_SDIO_CTRL_LEDCtrl 0x7C
#define ASIC3_SDIO_CTRL_SoftwareReset 0x1C0

-#define ASIC3_MAP_SIZE 0x2000
+#define ASIC3_MAP_SIZE_32BIT 0x2000
+#define ASIC3_MAP_SIZE_16BIT 0x1000

#endif /* __ASIC3_H__ */
--
1.5.6


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/