Re: pata_it821x completely broken

From: Ondrej Zary
Date: Mon Jul 07 2008 - 14:08:05 EST

Next message: Tony Camuso: "Re: bfsort whitelist patch apparently applied twice"
Previous message: Rafael J. Wysocki: "Re: [PATCH 2/2] acpi: Disable IRQ 0 through I/O APIC for some HP systems"
In reply to: Alan Cox: "Re: pata_it821x completely broken"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Monday 07 July 2008 01:01:18 Alan Cox wrote:
> On Sun, Jul 06, 2008 at 11:50:33PM +0200, Ondrej Zary wrote:
> > Thanks, it does not complain about HPA anymore. However, there are some
> > error messages left. I thought that they were connected with the HPA, but
> > obviously they aren't:
>
> FLUSH_CACHE .. I would hope the firmware supports that if advertised. If so
> then adding it to the switch in it821x_smart_qc_issue might do the trick
> (ATA_CMD_FLUSH and ATA_CMD_FLUSH_EXT). I'd be interested to know if your
> firmware seems to support that or whether the entire thing goes castors up
> if it gets through.

It breaks - I get more errors and it takes ages to reboot. Looks like the
firmware does not like that command. I don't believe that it's so stupid - is
it even possible to safely turn off the machine when neither FLUSH nor STOP
command can be issued?

sd 2:0:0:0: [sdb] Synchronizing SCSI cache
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: limiting speed to UDMA/133:PIO6
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
sd 2:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 2:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: limiting speed to UDMA/33:PIO6
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
sd 2:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 2:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: limiting speed to PIO6
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: port is slow to respond, please be patient (Status 0xd0)
ata3: device not ready (errno=-16), forcing hardreset
ata3: soft resetting link
ata3.00: configured for DMA
ata3: EH complete
sd 2:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 2:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 2:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
sd 2:0:0:0: [sdb] Sense Key : 0xb [current] [descriptor]
sd 2:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
Restarting system.
machine restart

>
> Alan

--
Ondrej Zary
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Tony Camuso: "Re: bfsort whitelist patch apparently applied twice"
Previous message: Rafael J. Wysocki: "Re: [PATCH 2/2] acpi: Disable IRQ 0 through I/O APIC for some HP systems"
In reply to: Alan Cox: "Re: pata_it821x completely broken"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]