Linux version 2.6.26-git8 (root@aspid) (gcc version 4.3.1 (Debian 4.3.1-2) ) #6 SMP PREEMPT Tue Jul 22 02:09:26 MSD 2008 Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.26-git8 root=UUID=ab3ca6c5-8b16-456b-8cc2-d68b130df7b6 ro resume=/dev/sda1 vga=normal nosplash noapictimer apic=debug BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffa0000 (usable) BIOS-e820: 000000003ffa0000 - 000000003ffae000 (ACPI data) BIOS-e820: 000000003ffae000 - 000000003fff0000 (ACPI NVS) BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls last_pfn = 0x3ffa0 max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping 0000000000 - 003fe00000 page 2M 003fe00000 - 003ffa0000 page 4k kernel direct mapping tables up to 3ffa0000 @ 8000-b000 last_map_addr: 3ffa0000 end: 3ffa0000 RAMDISK: 2f9eb000 - 2fff79a0 DMI 2.4 present. ACPI: RSDP 000FBB20, 0014 (r0 ACPIAM) ACPI: RSDT 3FFA0000, 0040 (r1 _ASUS_ Notebook 4000724 MSFT 97) ACPI: FACP 3FFA0200, 0084 (r2 A M I OEMFACP 4000724 MSFT 97) ACPI: DSDT 3FFA05F0, 916E (r1 A0427 A0427000 0 INTL 2002026) ACPI: FACS 3FFAE000, 0040 ACPI: APIC 3FFA0390, 0070 (r1 A M I OEMAPIC 4000724 MSFT 97) ACPI: MCFG 3FFA0400, 003C (r1 A M I OEMMCFG 4000724 MSFT 97) ACPI: BOOT 3FFA05C0, 0028 (r1 A M I OEMBOOT 4000724 MSFT 97) ACPI: SLIC 3FFA0440, 0176 (r1 _ASUS_ Notebook 4000724 MSFT 97) ACPI: OEMB 3FFAE040, 0060 (r1 A M I AMI_OEM 4000724 MSFT 97) ACPI: HPET 3FFA9760, 0038 (r1 A M I OEMHPET0 4000724 MSFT 97) Entering add_active_range(0, 0x0, 0x9f) 0 entries of 256 used Entering add_active_range(0, 0x100, 0x3ffa0) 1 entries of 256 used (6 early reservations) ==> bootmem [0000000000 - 003ffa0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 0000b70c48] TEXT DATA BSS ==> [0000200000 - 0000b70c48] #3 [002f9eb000 - 002fff79a0] RAMDISK ==> [002f9eb000 - 002fff79a0] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] Scan SMP from ffff880000000000 for 1024 bytes. Scan SMP from ffff88000009fc00 for 1024 bytes. Scan SMP from ffff8800000f0000 for 65536 bytes. found SMP MP-table at [ffff8800000ff780] 000ff780 [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0003ffa0 On node 0 totalpages: 261951 DMA zone: 56 pages used for memmap DMA zone: 2518 pages reserved DMA zone: 1425 pages, LIFO batch:0 DMA32 zone: 3527 pages used for memmap DMA32 zone: 254425 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x508 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) Bus #0 is ISA ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to flat ACPI: HPET id: 0x10de8201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs mapped APIC to ffffffffff5fc000 ( fee00000) mapped IOAPIC to ffffffffff5fb000 (00000000fec00000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) PERCPU: Allocating 442688 bytes of per cpu data NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255850 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.26-git8 root=UUID=ab3ca6c5-8b16-456b-8cc2-d68b130df7b6 ro resume=/dev/sda1 vga=normal nosplash noapictimer apic=debug Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC calibrated against PM_TIMER Detected 1607.308 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 1840 kB per task-struct memory footprint: 3456 bytes Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ 242000000 size 32 MB Aperture beyond 4GB. Ignoring. Memory: 1014408k/1048192k available (2575k kernel code, 32868k reserved, 1556k data, 728k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. <6>3214.61 BogoMIPS (lpj=16073080) Security Framework initialized SELinux: Disabled at boot. Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using C1E aware idle routine ACPI: Core revision 20080609 Getting VERSION: 80050010 Getting VERSION: 80050010 Getting ID: 0 Getting ID: ff000000 Getting LVT0: 700 Getting LVT1: 400 enabled ExtINT on CPU#0 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0 not connected. IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0) IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02 Disabling APIC timer ++++++++++++++++++++=_---CPU UP 1 lockdep: fixing up alternatives. Booting processor 1/1 ip 6000 Setting warm reset code and vector. 1. 2. 3. Asserting INIT. Waiting for send to finish... Deasserting INIT. Waiting for send to finish... #startup loops: 2. Sending STARTUP #1. After apic_write. Initializing CPU#1 CPU#1 (phys ID: 1) waiting for CALLOUT Startup point 1. Waiting for send to finish... Sending STARTUP #2. After apic_write. Startup point 1. Waiting for send to finish... After Startup. Before Callout 1. After Callout 1. CALLIN, before setup_local_APIC(). masked ExtINT on CPU#1 Calibrating delay using timer specific routine.. <6>3214.77 BogoMIPS (lpj=16073864) Stack at about ffff88003f89bf44 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 System has C1E enabled OK. CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02 CPU has booted. Brought up 2 CPUs Boot done. Before bogomips. Total of 2 processors activated (6429.38 BogoMIPS). Before bogocount - setting activated=1. CPU0 attaching sched-domain: domain 0: span 0-1 level CPU groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level CPU groups: 1 0 net_namespace: 1576 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 node 0 link 0: io port [1000, ffffff] TOM: 0000000040000000 aka 1024M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [40000000, fe0bffff] bus: [00,ff] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [40000000, fcffffffff] bus: 00 index 2 mmio: [a0000, bffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access Switch to broadcast mode on CPU1 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: BIOS Bug: MCFG area at e0000000 is not reserved in ACPI motherboard resources PCI: Not using MMCONFIG. Switch to broadcast mode on CPU0 ACPI: EC: GPE = 0x20, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in poll mode ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:0a.1: PME# supported from D3hot D3cold pci 0000:00:0a.1: PME# disabled pci 0000:00:0b.0: supports D1 pci 0000:00:0b.0: supports D2 pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:0b.1: supports D1 pci 0000:00:0b.1: supports D2 pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.1: PME# disabled pci 0000:00:10.1: PME# supported from D3hot D3cold pci 0000:00:10.1: PME# disabled pci 0000:00:14.0: supports D1 pci 0000:00:14.0: supports D2 pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:14.0: PME# disabled pci 0000:05:01.0: PME# supported from D0 D3hot D3cold pci 0000:05:01.0: PME# disabled pci 0000:05:01.1: supports D1 pci 0000:05:01.1: supports D2 pci 0000:05:01.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:05:01.1: PME# disabled pci 0000:05:01.2: supports D1 pci 0000:05:01.2: supports D2 pci 0000:05:01.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:05:01.2: PME# disabled pci 0000:05:01.3: supports D1 pci 0000:05:01.3: supports D2 pci 0000:05:01.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:05:01.3: PME# disabled pci 0000:00:10.0: transparent bridge bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 16) *5 ACPI: PCI Interrupt Link [LNKB] (IRQs 17) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [LNEA] (IRQs 18) *11 ACPI: PCI Interrupt Link [LNEB] (IRQs 19) *11 ACPI: PCI Interrupt Link [LNEC] (IRQs 5) *0, disabled. ACPI: PCI Interrupt Link [LNED] (IRQs 11) *0, disabled. ACPI: PCI Interrupt Link [LUB0] (IRQs 10) *11 ACPI: PCI Interrupt Link [LUB2] (IRQs 20) *7 ACPI: PCI Interrupt Link [LMAC] (IRQs 21) *5 ACPI: PCI Interrupt Link [LAZA] (IRQs 22) *5 ACPI: PCI Interrupt Link [LACI] (IRQs 22) *0, disabled. ACPI: PCI Interrupt Link [LMC9] (IRQs 7) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 7) *5 ACPI: PCI Interrupt Link [LPMU] (IRQs 7) *10 ACPI: PCI Interrupt Link [LSA0] (IRQs 23) *10 ACPI: PCI Interrupt Link [LSA1] (IRQs 23) *0, disabled. ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered PCI: Using ACPI for IRQ routing number of MP IRQ sources: 15. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 02000000 ....... : arbitration: 02 .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 000 1 0 0 0 0 0 0 00 01 003 0 0 0 0 0 1 1 31 02 003 0 0 0 0 0 1 1 30 03 003 0 0 0 0 0 1 1 33 04 003 0 0 0 0 0 1 1 34 05 003 1 0 0 0 0 1 1 35 06 003 0 0 0 0 0 1 1 36 07 003 1 0 0 0 0 1 1 37 08 003 0 0 0 0 0 1 1 38 09 003 0 1 0 0 0 1 1 39 0a 003 1 0 0 0 0 1 1 3A 0b 003 1 0 0 0 0 1 1 3B 0c 003 0 0 0 0 0 1 1 3C 0d 003 0 0 0 0 0 1 1 3D 0e 003 0 0 0 0 0 1 1 3E 0f 003 0 0 0 0 0 1 1 3F 10 000 1 0 0 0 0 0 0 00 11 000 1 0 0 0 0 0 0 00 12 000 1 0 0 0 0 0 0 00 13 000 1 0 0 0 0 0 0 00 14 000 1 0 0 0 0 0 0 00 15 000 1 0 0 0 0 0 0 00 16 000 1 0 0 0 0 0 0 00 17 000 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default DMAR:parse DMAR table failure. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 hpet0: 3 32-bit timers, 25000000 Hz ACPI: RTC can wake from S4 Clockevents: could not switch to one-shot mode: lapic is not functional. Could not switch to high resolution mode on CPU 0 Clockevents: could not switch to one-shot mode: lapic is not functional. Could not switch to high resolution mode on CPU 1 system 00:07: ioport range 0x25c-0x25f has been reserved system 00:09: ioport range 0x4d0-0x4d1 has been reserved system 00:09: ioport range 0x800-0x80f has been reserved system 00:09: ioport range 0x500-0x57f has been reserved system 00:09: ioport range 0x580-0x5ff has been reserved system 00:09: ioport range 0x800-0x87f could not be reserved system 00:09: ioport range 0x880-0x8ff has been reserved system 00:09: ioport range 0x900-0x97f has been reserved system 00:09: ioport range 0x980-0x9ff has been reserved system 00:09: iomem range 0xfee01000-0xfeefffff could not be reserved system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:0c: iomem range 0xe0000000-0xe7ffffff has been reserved system 00:0d: iomem range 0x0-0x9ffff could not be reserved system 00:0d: iomem range 0xc0000-0xcffff has been reserved system 00:0d: iomem range 0xe0000-0xfffff could not be reserved system 00:0d: iomem range 0x100000-0x3fffffff could not be reserved system 00:0d: iomem range 0xff780000-0xffffffff could not be reserved pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 pci 0000:00:02.0: IO window: disabled pci 0000:00:02.0: MEM window: 0xdc700000-0xdc7fffff pci 0000:00:02.0: PREFETCH window: disabled pci 0000:00:03.0: PCI bridge, secondary bus 0000:02 pci 0000:00:03.0: IO window: 0xd000-0xdfff pci 0000:00:03.0: MEM window: 0xdc800000-0xdcffffff pci 0000:00:03.0: PREFETCH window: 0x000000be000000-0x000000bfffffff pci 0000:00:04.0: PCI bridge, secondary bus 0000:04 pci 0000:00:04.0: IO window: 0xe000-0xefff pci 0000:00:04.0: MEM window: 0xdd000000-0xdfefffff pci 0000:00:04.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff pci 0000:00:10.0: PCI bridge, secondary bus 0000:05 pci 0000:00:10.0: IO window: disabled pci 0000:00:10.0: MEM window: 0xdff00000-0xdfffffff pci 0000:00:10.0: PREFETCH window: disabled PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:10.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 10, 4194304 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 6194k freed Simple Boot Flag at 0x4c set to 0x1 IA-32 Microcode Update Driver: v1.14a microcode: CPU0 not a capable Intel processor microcode: CPU1 not a capable Intel processor audit: initializing netlink socket (disabled) type=2000 audit(1216686448.339:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 1994 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:02.0: Enabling HT MSI Mapping pci 0000:00:03.0: Enabling HT MSI Mapping pci 0000:00:04.0: Enabling HT MSI Mapping pci 0000:00:09.0: Enabling HT MSI Mapping pci 0000:00:0e.0: Enabling HT MSI Mapping pci 0000:00:10.0: Enabling HT MSI Mapping pci 0000:00:10.1: Enabling HT MSI Mapping pci 0000:04:00.0: Boot video device PCI: Setting latency timer of device 0000:00:02.0 to 64 pcieport-driver 0000:00:02.0: found MSI capability pci_express 0000:00:02.0:pcie00: allocate port service PCI: Setting latency timer of device 0000:00:03.0 to 64 pcieport-driver 0000:00:03.0: found MSI capability pci_express 0000:00:03.0:pcie00: allocate port service PCI: Setting latency timer of device 0000:00:04.0 to 64 pcieport-driver 0000:00:04.0: found MSI capability pci_express 0000:00:04.0:pcie00: allocate port service ALI M7101 PMU not found. uvesafb: failed to execute /sbin/v86d uvesafb: make sure that the v86d helper is installed and executable uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) uvesafb: vbe_init() failed with -22 uvesafb: probe of uvesafb.0 failed with error -22 vga16fb: initializing vga16fb: mapped to 0xffff8800000a0000 Console: switching to colour frame buffer device 80x30 fb0: VGA16 VGA frame buffer device ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: LNXTHERM:01 is registered as thermal_zone0 ACPI: Thermal Zone [TZ00] (60 C) hpet_resources: 0xfed00000 is busy Linux agpgart interface v0.103 Serial: 8250/16550 driver4 ports, IRQ sharing disabled brd: module loaded asus-laptop: Asus Laptop Support version 0.42 asus-laptop: F3T model detected ACPI: EC: non-query interrupt received, switching to interrupt mode Registered led device: asus::mail PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k cpuidle: using governor ladder cpuidle: using governor menu TCP bic registered NET: Registered protocol family 17 powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-52 processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x13 powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e rtc_cmos 00:02: setting system clock to 2008-07-22 00:27:29 UTC (1216686449) Freeing unused kernel memory: 728k freed input: AT Translated Set 2 keyboard as /class/input/input0 powernow-k8: ph2 null fid transition 0x8 No dock devices found. SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21 IOAPIC[0]: Set routing entry (2-21 -> 0x61 -> IRQ 21 Mode:1 Active:1) forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:14.0 to 64 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman libata version 3.00 loaded. ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ricoh-mmc: Ricoh MMC Controller disabling driver ricoh-mmc: Copyright(c) Philip Langdale forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 66:77:44:22:33:11 forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3 sata_nv 0000:00:0e.0: version 3.5 ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 IOAPIC[0]: Set routing entry (2-23 -> 0x69 -> IRQ 23 Mode:1 Active:1) sata_nv 0000:00:0e.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 sata_nv 0000:00:0e.0: Using SWNCQ mode PCI: Setting latency timer of device 0000:00:0e.0 to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 23 ata2: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 23 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: HTS541010G9SA00, MBZOC60R, max UDMA/100 ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/100 Clocksource tsc unstable (delta = -170038645 ns) ata2: SATA link down (SStatus 0 SControl 300) isa bounce pool size: 16 pages scsi 0:0:0:0: Direct-Access ATA HTS541010G9SA00 MBZO PQ: 0 ANSI: 5 ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20 IOAPIC[0]: Set routing entry (2-20 -> 0x71 -> IRQ 20 Mode:1 Active:1) ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20 udev: renamed network interface eth0 to eth1 PCI: Setting latency timer of device 0000:00:0b.1 to 64 ehci_hcd 0000:00:0b.1: EHCI Host Controller ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0b.1: debug port 1 ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported ehci_hcd 0000:00:0b.1: irq 20, io mem 0xdc6bfc00 ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.26-git8 ehci_hcd usb usb1: SerialNumber: 0000:00:0b.1 ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 10 IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:1 Active:1) ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUB0] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:0b.0 to 64 ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0b.0: irq 10, io mem 0xdc6be000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.26-git8 ohci_hcd usb usb2: SerialNumber: 0000:00:0b.0 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 16 IOAPIC[0]: Set routing entry (2-16 -> 0x79 -> IRQ 16 Mode:1 Active:1) firewire_ohci 0000:05:01.0: PCI INT A -> Link[LNKA] -> GSI 16 (level, low) -> IRQ 16 pata_amd 0000:00:0d.0: version 0.3.10 PCI: Setting latency timer of device 0000:00:0d.0 to 64 scsi2 : pata_amd scsi3 : pata_amd ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 firewire_ohci: Added fw-ohci device 0000:05:01.0, OHCI version 1.0 ricoh-mmc: Ricoh MMC controller found at 0000:05:01.2 [1180:0843] (rev 1) ricoh-mmc: Controller is now disabled. usb 1-7: new high speed USB device using ehci_hcd and address 3 usb 1-7: configuration #1 chosen from 1 choice usb 1-7: New USB device found, idVendor=05e1, idProduct=0501 usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-7: Product: USB 2.0 Image Capture Controller usb 1-7: Manufacturer: Syntek Semiconductor ata4.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, HJ02, max UDMA/33 ata4: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc000) ACPI=0x701f (60:900:0x11) ata4.00: configured for UDMA/33 scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GMA-4082N HJ02 PQ: 0 ANSI: 5 sdhci-pci 0000:05:01.1: SDHCI controller found [1180:0822] (rev 19) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 17 IOAPIC[0]: Set routing entry (2-17 -> 0x81 -> IRQ 17 Mode:1 Active:1) sdhci-pci 0000:05:01.1: PCI INT B -> Link[LNKB] -> GSI 17 (level, low) -> IRQ 17 Registered led device: mmc0 mmc0: SDHCI controller on PCI [0000:05:01.1] using PIO firewire_core: created device fw0: GUID 00e0180003715a18, S400 Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<4>Driver 'sr' needs updating - please use bus_type methods usb 2-3: new low speed USB device using ohci_hcd and address 2 usb 2-3: configuration #1 chosen from 1 choice sda1 sda2 sda3 <<6>usb 2-3: New USB device found, idVendor=046d, idProduct=c019 usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-3: Product: Logitech USB Optical Mouse sda5 sda6<6>usb 2-3: Manufacturer: Logitech sda7 > sda4 usbcore: registered new interface driver hiddev sd 0:0:0:0: [sda] Attached SCSI disk input: Logitech Logitech USB Optical Mouse as /class/input/input1 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:0b.0-3 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 3:0:0:0: Attached scsi generic sg1 type 5 PM: Starting manual resume from disk ReiserFS: sda2: found reiserfs format "3.6" with standard journal ReiserFS: sda2: using ordered data mode ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda2: checking transaction log (sda2) ReiserFS: sda2: Using r5 hash to sort names input: Power Button (FF) as /class/input/input2 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input3 ACPI: Sleep Button (CM) [SLPB] input: Lid Switch as /class/input/input4 ACPI: AC Adapter [AC0] (on-line) ACPI: Lid Switch [LID] input: Power Button (CM) as /class/input/input5 ACPI: device:09 is registered as cooling_device2 input: Video Bus as /class/input/input6 ACPI: Power Button (CM) [PWRB] ACPI: WMI: Mapper loaded ACPI: I/O resource nForce2_smbus [0x600-0x63f] conflicts with ACPI region SMRG [0x600-0x60f] ACPI: Device needs an ACPI driver i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) ACPI: Battery Slot [BAT0] (battery present) input: PC Speaker as /class/input/input7 ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22 IOAPIC[0]: Set routing entry (2-22 -> 0x89 -> IRQ 22 Mode:1 Active:1) HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:10.1 to 64 input: PS/2 Mouse as /class/input/input8 input: AlpsPS/2 ALPS GlidePoint as /class/input/input9 Adding 1574328k swap on /dev/sda1. Priority:-1 extents:1 across:1574328k loop: module loaded fuse init (API version 7.9) ReiserFS: sda4: found reiserfs format "3.6" with standard journal ReiserFS: sda4: using ordered data mode ReiserFS: sda4: journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda4: checking transaction log (sda4) ReiserFS: sda4: Using r5 hash to sort names ReiserFS: sda5: found reiserfs format "3.6" with standard journal ReiserFS: sda5: using ordered data mode ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda5: checking transaction log (sda5) ReiserFS: sda5: Using r5 hash to sort names ReiserFS: sda6: found reiserfs format "3.6" with standard journal ReiserFS: sda6: using ordered data mode ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda6: checking transaction log (sda6) ReiserFS: sda6: Using r5 hash to sort names ReiserFS: sda7: found reiserfs format "3.6" with standard journal ReiserFS: sda7: using ordered data mode ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda7: checking transaction log (sda7) ReiserFS: sda7: Using r5 hash to sort names IPv4 FIB: Using LC-trie version 0.408 eth1: no link during initialization. eth1: no link during initialization. eth1: no link during initialization. eth1: no link during initialization. NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth1: link is not ready warning: `ntpd' uses 32-bit capabilities (legacy support in use) Bluetooth: Core ver 2.12 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.10 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10