Re: [PATCH] Remove newline from the description of moduleparameters

From: Randy Dunlap
Date: Sun Jul 27 2008 - 23:34:00 EST

Next message: Simon Horman: "Re: [patch] crashdump: fix undefined reference to `elfcorehdr_addr'"
Previous message: Jaswinder Singh: "Re: [PATCH] typhoon: use request_firmware"
In reply to: Niels de Vos: "[PATCH] Remove newline from the description of module parameters"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Sun, 27 Jul 2008 20:12:27 +0200 Niels de Vos wrote:

> Some module parameters with only one line have the '\n' at the end of
> the description. This is not needed nor wanted as after the
> description the type (i.e. int) is followed by a newline.
>
> Some modules contain a multi-line description, these are not affected
> by this patch.
>
> Signed-off-by: Niels de Vos <niels.devos@xxxxxxxxxxxxxxxxxx>

Acked-by: Randy Dunlap <randy.dunlap@xxxxxxxxxx>

Thanks.

> ---
> drivers/acpi/asus_acpi.c | 4 ++--
> drivers/block/aoe/aoenet.c | 2 +-
> drivers/gpu/drm/radeon/radeon_drv.c | 2 +-
> drivers/infiniband/hw/ipath/ipath_iba7220.c | 2 +-
> drivers/media/video/cs5345.c | 2 +-
> drivers/media/video/cs53l32a.c | 2 +-
> drivers/media/video/mt9v022.c | 2 +-
> drivers/net/netconsole.c | 2 +-
> drivers/net/tokenring/3c359.c | 8 ++++----
> drivers/net/wireless/ipw2200.c | 2 +-
> drivers/net/wireless/iwlwifi/iwl-4965.c | 2 +-
> drivers/video/matrox/matroxfb_base.c | 2 +-
> 12 files changed, 16 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/acpi/asus_acpi.c b/drivers/acpi/asus_acpi.c
> index 44ad90c..d3d0886 100644
> --- a/drivers/acpi/asus_acpi.c
> +++ b/drivers/acpi/asus_acpi.c
> @@ -78,9 +78,9 @@ MODULE_LICENSE("GPL");
> static uid_t asus_uid;
> static gid_t asus_gid;
> module_param(asus_uid, uint, 0);
> -MODULE_PARM_DESC(asus_uid, "UID for entries in /proc/acpi/asus.\n");
> +MODULE_PARM_DESC(asus_uid, "UID for entries in /proc/acpi/asus");
> module_param(asus_gid, uint, 0);
> -MODULE_PARM_DESC(asus_gid, "GID for entries in /proc/acpi/asus.\n");
> +MODULE_PARM_DESC(asus_gid, "GID for entries in /proc/acpi/asus");
>
> /* For each model, all features implemented,
> * those marked with R are relative to HOTK, A for absolute */
> diff --git a/drivers/block/aoe/aoenet.c b/drivers/block/aoe/aoenet.c
> index d625169..0c81ca7 100644
> --- a/drivers/block/aoe/aoenet.c
> +++ b/drivers/block/aoe/aoenet.c
> @@ -30,7 +30,7 @@ enum {
>
> static char aoe_iflist[IFLISTSZ];
> module_param_string(aoe_iflist, aoe_iflist, IFLISTSZ, 0600);
> -MODULE_PARM_DESC(aoe_iflist, "aoe_iflist=\"dev1 [dev2 ...]\"\n");
> +MODULE_PARM_DESC(aoe_iflist, "aoe_iflist=\"dev1 [dev2 ...]\"");
>
> #ifndef MODULE
> static int __init aoe_iflist_setup(char *str)
> diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
> index 349ac3d..637bd7f 100644
> --- a/drivers/gpu/drm/radeon/radeon_drv.c
> +++ b/drivers/gpu/drm/radeon/radeon_drv.c
> @@ -38,7 +38,7 @@
>
> int radeon_no_wb;
>
> -MODULE_PARM_DESC(no_wb, "Disable AGP writeback for scratch registers\n");
> +MODULE_PARM_DESC(no_wb, "Disable AGP writeback for scratch registers");
> module_param_named(no_wb, radeon_no_wb, int, 0444);
>
> static int dri_library_name(struct drm_device *dev, char *buf)
> diff --git a/drivers/infiniband/hw/ipath/ipath_iba7220.c b/drivers/infiniband/hw/ipath/ipath_iba7220.c
> index fb70712..fadbfbf 100644
> --- a/drivers/infiniband/hw/ipath/ipath_iba7220.c
> +++ b/drivers/infiniband/hw/ipath/ipath_iba7220.c
> @@ -528,7 +528,7 @@ static const struct ipath_cregs ipath_7220_cregs = {
>
> static char int_type[16] = "auto";
> module_param_string(interrupt_type, int_type, sizeof(int_type), 0444);
> -MODULE_PARM_DESC(int_type, " interrupt_type=auto|force_msi|force_intx\n");
> +MODULE_PARM_DESC(int_type, " interrupt_type=auto|force_msi|force_intx");
>
> /* packet rate matching delay; chip has support */
> static u8 rate_to_delay[2][2] = {
> diff --git a/drivers/media/video/cs5345.c b/drivers/media/video/cs5345.c
> index 1c3fa3a..2fb2c0e 100644
> --- a/drivers/media/video/cs5345.c
> +++ b/drivers/media/video/cs5345.c
> @@ -35,7 +35,7 @@ static int debug;
>
> module_param(debug, bool, 0644);
>
> -MODULE_PARM_DESC(debug, "Debugging messages\n\t\t\t0=Off (default), 1=On");
> +MODULE_PARM_DESC(debug, "Debugging messages, 0=Off (default), 1=On");
>
>
> /* ----------------------------------------------------------------------- */
> diff --git a/drivers/media/video/cs53l32a.c b/drivers/media/video/cs53l32a.c
> index 645b339..d9f920e 100644
> --- a/drivers/media/video/cs53l32a.c
> +++ b/drivers/media/video/cs53l32a.c
> @@ -39,7 +39,7 @@ static int debug;
>
> module_param(debug, bool, 0644);
>
> -MODULE_PARM_DESC(debug, "Debugging messages\n\t\t\t0=Off (default), 1=On");
> +MODULE_PARM_DESC(debug, "Debugging messages, 0=Off (default), 1=On");
>
> static unsigned short normal_i2c[] = { 0x22 >> 1, I2C_CLIENT_END };
>
> diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
> index b31ba4e..56808cd 100644
> --- a/drivers/media/video/mt9v022.c
> +++ b/drivers/media/video/mt9v022.c
> @@ -25,7 +25,7 @@
>
> static char *sensor_type;
> module_param(sensor_type, charp, S_IRUGO);
> -MODULE_PARM_DESC(sensor_type, "Sensor type: \"colour\" or \"monochrome\"\n");
> +MODULE_PARM_DESC(sensor_type, "Sensor type: \"colour\" or \"monochrome\"");
>
> /* mt9v022 selected register addresses */
> #define MT9V022_CHIP_VERSION 0x00
> diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c
> index e13966b..9681618 100644
> --- a/drivers/net/netconsole.c
> +++ b/drivers/net/netconsole.c
> @@ -53,7 +53,7 @@ MODULE_LICENSE("GPL");
>
> static char config[MAX_PARAM_LENGTH];
> module_param_string(netconsole, config, MAX_PARAM_LENGTH, 0);
> -MODULE_PARM_DESC(netconsole, " netconsole=[src-port]@[src-ip]/[dev],[tgt-port]@<tgt-ip>/[tgt-macaddr]\n");
> +MODULE_PARM_DESC(netconsole, " netconsole=[src-port]@[src-ip]/[dev],[tgt-port]@<tgt-ip>/[tgt-macaddr]");
>
> #ifndef MODULE
> static int __init option_setup(char *opt)
> diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
> index 7766cde..bf62132 100644
> --- a/drivers/net/tokenring/3c359.c
> +++ b/drivers/net/tokenring/3c359.c
> @@ -95,20 +95,20 @@ MODULE_DESCRIPTION("3Com 3C359 Velocity XL Token Ring Adapter Driver \n") ;
> static int ringspeed[XL_MAX_ADAPTERS] = {0,} ;
>
> module_param_array(ringspeed, int, NULL, 0);
> -MODULE_PARM_DESC(ringspeed,"3c359: Ringspeed selection - 4,16 or 0") ;
> +MODULE_PARM_DESC(ringspeed,"3c359: Ringspeed selection - 4,16 or 0") ;
>
> /* Packet buffer size */
>
> static int pkt_buf_sz[XL_MAX_ADAPTERS] = {0,} ;
>
> module_param_array(pkt_buf_sz, int, NULL, 0) ;
> -MODULE_PARM_DESC(pkt_buf_sz,"3c359: Initial buffer size") ;
> +MODULE_PARM_DESC(pkt_buf_sz,"3c359: Initial buffer size") ;
> /* Message Level */
>
> -static int message_level[XL_MAX_ADAPTERS] = {0,} ;
> +static int message_level[XL_MAX_ADAPTERS] = {0,} ;
>
> module_param_array(message_level, int, NULL, 0) ;
> -MODULE_PARM_DESC(message_level, "3c359: Level of reported messages \n") ;
> +MODULE_PARM_DESC(message_level, "3c359: Level of reported messages") ;
> /*
> * This is a real nasty way of doing this, but otherwise you
> * will be stuck with 1555 lines of hex #'s in the code.
> diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
> index 1acfbcd..846a7d0 100644
> --- a/drivers/net/wireless/ipw2200.c
> +++ b/drivers/net/wireless/ipw2200.c
> @@ -11946,7 +11946,7 @@ module_param(auto_create, int, 0444);
> MODULE_PARM_DESC(auto_create, "auto create adhoc network (default on)");
>
> module_param(led, int, 0444);
> -MODULE_PARM_DESC(led, "enable led control on some systems (default 0 off)\n");
> +MODULE_PARM_DESC(led, "enable led control on some systems (default 0 off)");
>
> module_param(debug, int, 0444);
> MODULE_PARM_DESC(debug, "debug output mask");
> diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
> index 9afecb8..ba2df1b 100644
> --- a/drivers/net/wireless/iwlwifi/iwl-4965.c
> +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
> @@ -2469,7 +2469,7 @@ MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
> module_param_named(disable, iwl4965_mod_params.disable, int, 0444);
> MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
> module_param_named(swcrypto, iwl4965_mod_params.sw_crypto, int, 0444);
> -MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])\n");
> +MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
> module_param_named(debug, iwl4965_mod_params.debug, int, 0444);
> MODULE_PARM_DESC(debug, "debug output mask");
> module_param_named(
> diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c
> index 54e82f3..c021362 100644
> --- a/drivers/video/matrox/matroxfb_base.c
> +++ b/drivers/video/matrox/matroxfb_base.c
> @@ -2536,7 +2536,7 @@ module_param(fh, int, 0);
> MODULE_PARM_DESC(fh, "Startup horizontal frequency, 0-999kHz, 1000-INF Hz");
> module_param(fv, int, 0);
> MODULE_PARM_DESC(fv, "Startup vertical frequency, 0-INF Hz\n"
> -"You should specify \"fv:max_monitor_vsync,fh:max_monitor_hsync,maxclk:max_monitor_dotclock\"\n");
> +"You should specify \"fv:max_monitor_vsync,fh:max_monitor_hsync,maxclk:max_monitor_dotclock\"");
> module_param(grayscale, int, 0);
> MODULE_PARM_DESC(grayscale, "Sets display into grayscale. Works perfectly with paletized videomode (4, 8bpp), some limitations apply to 16, 24 and 32bpp videomodes (default=nograyscale)");
> module_param(cross4MB, int, 0);
> --

---
~Randy
Linux Plumbers Conference, 17-19 September 2008, Portland, Oregon USA
http://linuxplumbersconf.org/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Simon Horman: "Re: [patch] crashdump: fix undefined reference to `elfcorehdr_addr'"
Previous message: Jaswinder Singh: "Re: [PATCH] typhoon: use request_firmware"
In reply to: Niels de Vos: "[PATCH] Remove newline from the description of module parameters"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]