Re: [linux-pm] Tyan S2923-E suspend to ram fails to resume

From: Pavel Machek
Date: Tue Aug 12 2008 - 06:30:56 EST


On Sat 2008-08-09 15:42:22, Simon Arlott wrote:
> On 08/08/08 12:20, Simon Arlott wrote:
>> On Fri, August 8, 2008 08:14, Pavel Machek wrote:
>>> On Mon 2008-08-04 22:56:07, Simon Arlott wrote:
>>>> My system (Tyan S2923-E, dmesg attached) suspends ok in
>>>> all pm_test modes, but it won't resume with pm_test
>>>> "none".
>>>>
>>>> [ 6.423515] mem full: hash matches
>>>>
>>>> When I press the power button, the port 80 display shows:
>>>> FF D0 23 01 D0 ... DE
>>>> (and again each time I press it)
>>>>
>>>> If I force it to turn off, then on again:
>>>> FF D0 23 01 D0 ... FF D0 23 01 D0 ... (D2?) D3 00 01 D5
>>>> D6 <normal boot>
>>>>
>>>> Any ideas? (onboard SAS is disabled, watchdog is
>>>> disabled, everything else is enabled, PCI-E graphics
>>>> card)
>>>
>>> Try verifying if it reaches assembly code under realmode/ ...
>
> I've tried acpi_sleep=s3_beep, and this:
>
> diff --git a/arch/x86/kernel/acpi/realmode/wakeup.S b/arch/x86/kernel/acpi/realmode/wakeup.S
> index 3355973..50e50df 100644
> --- a/arch/x86/kernel/acpi/realmode/wakeup.S
> +++ b/arch/x86/kernel/acpi/realmode/wakeup.S
> @@ -37,6 +37,11 @@ signature: .long 0x51ee1111
> .code16
> wakeup_code:
> _start:
> + movb $0xC1, %al
> + outb %al, $0x80
> + cli
> + hlt
> +
> cli
> cld
>
>
> Which doesn't work either.

Yep, that should work. When it does not, it means BIOS is not
returning to our real mode code :-(. You may want to try disabling
APIC and similar stuff, in hope of working around BIOS bug you are
hitting, but ...
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/