Re: [PATCH] sky2: Fix suspend/hibernation/shutdown regression withWOL enabled (rev. 2)

[Jeff Garzik]

Rafael J. Wysocki wrote:
> On Sunday, 10 of August 2008, Rafael J. Wysocki wrote:
> > On Sunday, 10 of August 2008, Stephen Hemminger wrote:
> > > On Sat, 9 Aug 2008 23:32:28 +0200
> > > "Rafael J. Wysocki" <rjw@xxxxxxx> wrote:
> [--snip--]
> > > The problem is not unique to your chip version,
> > Well, that's the part I wasn't sure of.
> >
> > > so patching out the power down is not the correct solution.
> > Sure.
>
> But, shouldn't we switch to page 2 before selecting PHY_MARV_PHY_CTRL?  Things
> work correctly if this is done (patch below).
>
> Thanks,
> Rafael
>
>
> ---
> On my test box with the Asus M3A32-MVP main board there is a
> regression from 2.6.26 related to suspend, hibernation and
> shutdown.  Namely, if Wake-on-LAN is enabled with
> 'ethtool -s eth0 wol g', the box hangs solid during all of these
> operations, while executing either sky2_suspend(), or
> sky2_shutdown().  This patch fixes it for me.
>
> Signed-off-by: Rafael J. Wysocki <rjw@xxxxxxx>
> ---
>  drivers/net/sky2.c |    7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
>
> Index: linux-2.6/drivers/net/sky2.c
> ===================================================================
> --- linux-2.6.orig/drivers/net/sky2.c
> +++ linux-2.6/drivers/net/sky2.c
> @@ -666,11 +666,16 @@ static void sky2_phy_power_down(struct s
>  
>  	if (hw->chip_id != CHIP_ID_YUKON_EC) {
>  		if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
> -			ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
> +			/* select page 2 to access MAC control register */
> +			gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
>  
> +			ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
>  			/* enable Power Down */
>  			ctrl |= PHY_M_PC_POW_D_ENA;
>  			gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
> +
> +			/* set page register back to 0 */
> +			gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
>  		}

applied


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/