[PATCH 1/9] ide: fix HDIO_DRIVE_TASK[FILE] ioctls for CHS commands on LBA devices

From: Bartlomiej Zolnierkiewicz
Date: Sun Aug 17 2008 - 15:56:19 EST


Add IDE_DFLAG_LBA device flag and use it instead of ->select.b.lba.

Since ->tf_load uses ->select.all for ATA Device/Head register this
fixes HDIO_DRIVE_TASK[FILE] ioctls for CHS commands on LBA devices.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
moar patches (on top of pata tree + previous 9)

drivers/ide/ide-disk.c | 33 ++++++++++++++++++++-------------
drivers/ide/ide-io.c | 4 ++--
include/linux/ide.h | 1 +
3 files changed, 23 insertions(+), 15 deletions(-)

Index: b/drivers/ide/ide-disk.c
===================================================================
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -156,7 +156,7 @@ static ide_startstop_t __ide_do_rw_disk(
memset(&task, 0, sizeof(task));
task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;

- if (drive->select.b.lba) {
+ if (drive->dev_flags & IDE_DFLAG_LBA) {
if (lba48) {
pr_debug("%s: LBA=0x%012llx\n", drive->name,
(unsigned long long)block);
@@ -181,6 +181,8 @@ static ide_startstop_t __ide_do_rw_disk(
tf->lbah = block >>= 8;
tf->device = (block >> 8) & 0xf;
}
+
+ tf->device |= ATA_LBA;
} else {
unsigned int sect, head, cyl, track;

@@ -378,28 +380,32 @@ static void idedisk_check_hpa(ide_drive_
static void init_idedisk_capacity(ide_drive_t *drive)
{
u16 *id = drive->id;
- /*
- * If this drive supports the Host Protected Area feature set,
- * then we may need to change our opinion about the drive's capacity.
- */
- int hpa = ata_id_hpa_enabled(id);
+ int lba;

if (ata_id_lba48_enabled(id)) {
/* drive speaks 48-bit LBA */
- drive->select.b.lba = 1;
+ lba = 1;
drive->capacity64 = ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
- if (hpa)
- idedisk_check_hpa(drive);
} else if (ata_id_has_lba(id) && ata_id_is_lba_capacity_ok(id)) {
/* drive speaks 28-bit LBA */
- drive->select.b.lba = 1;
+ lba = 1;
drive->capacity64 = ata_id_u32(id, ATA_ID_LBA_CAPACITY);
- if (hpa)
- idedisk_check_hpa(drive);
} else {
/* drive speaks boring old 28-bit CHS */
+ lba = 0;
drive->capacity64 = drive->cyl * drive->head * drive->sect;
}
+
+ if (lba) {
+ drive->dev_flags |= IDE_DFLAG_LBA;
+
+ /*
+ * If this device supports the Host Protected Area feature set,
+ * then we may need to change our opinion about its capacity.
+ */
+ if (ata_id_hpa_enabled(id))
+ idedisk_check_hpa(drive);
+ }
}

static sector_t idedisk_capacity(ide_drive_t *drive)
@@ -1105,7 +1111,8 @@ static int ide_disk_probe(ide_drive_t *d
drive->driver_data = idkp;

idedisk_setup(drive);
- if ((!drive->head || drive->head > 16) && !drive->select.b.lba) {
+ if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 &&
+ (drive->head == 0 || drive->head > 16)) {
printk(KERN_ERR "%s: INVALID GEOMETRY: %d PHYSICAL HEADS?\n",
drive->name, drive->head);
drive->dev_flags &= ~IDE_DFLAG_ATTACH;
Index: b/drivers/ide/ide-io.c
===================================================================
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -383,7 +383,7 @@ static ide_startstop_t ide_ata_error(ide
} else if (stat & ATA_ERR) {
/* err has different meaning on cdrom and tape */
if (err == ATA_ABORTED) {
- if (drive->select.b.lba &&
+ if ((drive->dev_flags & IDE_DFLAG_LBA) &&
/* some newer drives don't support ATA_CMD_INIT_DEV_PARAMS */
hwif->tp_ops->read_status(hwif) == ATA_CMD_INIT_DEV_PARAMS)
return ide_stopped;
@@ -513,7 +513,7 @@ static void ide_tf_set_specify_cmd(ide_d
tf->lbal = drive->sect;
tf->lbam = drive->cyl;
tf->lbah = drive->cyl >> 8;
- tf->device = ((drive->head - 1) | drive->select.all) & ~ATA_LBA;
+ tf->device = (drive->head - 1) | drive->select.all;
tf->command = ATA_CMD_INIT_DEV_PARAMS;
}

Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -500,6 +500,7 @@ enum {
IDE_DFLAG_NOWERR = (1 << 24),
/* retrying in PIO */
IDE_DFLAG_DMA_PIO_RETRY = (1 << 25),
+ IDE_DFLAG_LBA = (1 << 26),
};

struct ide_drive_s {
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/