Re: hotplug create_slot hang
From: Kenji Kaneshige
Date: Mon Sep 08 2008 - 08:57:22 EST
Alex Chiang wrote:
* Yinghai Lu <yhlu.kernel@xxxxxxxxx>:
On Sat, Sep 6, 2008 at 2:50 PM, Alex Chiang <achiang@xxxxxx> wrote:
* Yinghai Lu <yhlu.kernel@xxxxxxxxx>:
calling pci_hotplug_init+0x0/0x1d
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
initcall pci_hotplug_init+0x0/0x1d returned 0 after 11 msecs
calling acpiphp_init+0x0/0x5f
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
decode_hpp: Could not get hotplug parameters. Use defaults
pci_create_slot: created pci_slot on 0000:07:00
acpiphp: Slot [1] registered
decode_hpp: Could not get hotplug parameters. Use defaults
pci_create_slot: created pci_slot on 0000:0d:00
acpiphp: Slot [2] registered
initcall acpiphp_init+0x0/0x5f returned 0 after 105 msecs
Is this the hang?
calling pcied_init+0x0/0x7b
pciehp: HPC vendor_id 8086 device_id 340a ss_vid 0 ss_did 0
pci_create_slot: inc refcount to 2 on 0000:07:00
pci_destroy_slot: dec refcount to 1 on 0000:07:00
pciehp: pci_hp_register failed with error -16
pciehp: pciehp: slot already registered by another hotplug driver
This failure is by design -- we only allow one hotplug driver to
claim a slot now, and it's "first one loaded wins".
Unless you're talking about something else?
after
pciehp: pciehp: slot already registered by another hotplug driver
never go on...
You said that it worked a few days ago, but is hanging now.
Can you bisect it?
Kenji-san, any ideas?
I'm sorry, but I don't have any idea so far.
Yinghai, does this happen even when pciehp is not configured?
Thanks,
Kenji Kaneshige
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/