Re: [regression] __tick_program_event of hpet is stuck
From: Frans Pop
Date: Mon Sep 08 2008 - 18:11:22 EST
On Monday 08 September 2008, Thomas Gleixner wrote:
> > Frans Pop schrieb:
> > > CE: __tick_program_event of hpet is stuck 1468f1b3c9 1468f1c751
> > > CE: increasing min_delta_ns 5000 to 10000 nsec
>
> Can you both please provide the full dmesg output and the out put from
> lspci -vvv please ?
Attached, thanks.
Linux version 2.6.27-rc5 (root@faramir) (gcc version 4.3.2 (Debian 4.3.2-1) ) #74 SMP Mon Sep 8 00:28:24 CEST 2008
Command line: root=/dev/mapper/main-root ro quiet vga=791
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007e7b0000 (usable)
BIOS-e820: 000000007e7b0000 - 000000007e7c5400 (reserved)
BIOS-e820: 000000007e7c5400 - 000000007e7e7fb8 (ACPI NVS)
BIOS-e820: 000000007e7e7fb8 - 000000007f000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
last_pfn = 0x7e7b0 max_arch_pfn = 0x3ffffffff
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
init_memory_mapping
0000000000 - 007e600000 page 2M
007e600000 - 007e7b0000 page 4k
kernel direct mapping tables up to 7e7b0000 @ 8000-c000
last_map_addr: 7e7b0000 end: 7e7b0000
RAMDISK: 37aa3000 - 37fefcf0
DMI 2.4 present.
ACPI: RSDP 000F7960, 0024 (r2 HP )
ACPI: XSDT 7E7C81C8, 007C (r1 HPQOEM SLIC-MPC 1 HP 1)
ACPI: FACP 7E7C8084, 00F4 (r4 HP 30C9 3 HP 1)
ACPI: DSDT 7E7C8538, 13484 (r1 HP nc2500 10000 MSFT 3000001)
ACPI: FACS 7E7E7D80, 0040
ACPI: SLIC 7E7C8244, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1)
ACPI: HPET 7E7C83BC, 0038 (r1 HP 30C9 1 HP 1)
ACPI: APIC 7E7C83F4, 0068 (r1 HP 30C9 1 HP 1)
ACPI: MCFG 7E7C845C, 003C (r1 HP 30C9 1 HP 1)
ACPI: TCPA 7E7C8498, 0032 (r2 HP 30C9 1 HP 1)
ACPI: ASF! 7E7C84CC, 0069 (r16 HP CHIMAYU 1 HP 0)
ACPI: SSDT 7E7DB9BC, 02BE (r1 HP HPQPAT 1 MSFT 3000001)
ACPI: SSDT 7E7DC640, 025F (r1 HP Cpu0Tst 3000 INTL 20060317)
ACPI: SSDT 7E7DC89F, 00A6 (r1 HP Cpu1Tst 3000 INTL 20060317)
ACPI: SSDT 7E7DC945, 04D7 (r1 HP CpuPm 3000 INTL 20060317)
ACPI: DMI detected: Hewlett-Packard
No NUMA configuration found
Faking a node at 0000000000000000-000000007e7b0000
Bootmem setup node 0 0000000000000000-000000007e7b0000
NODE_DATA [0000000000001000 - 0000000000004fff]
bootmap [000000000000a000 - 0000000000019cf7] pages 10
(6 early reservations) ==> bootmem [0000000000 - 007e7b0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 000074c4e0] TEXT DATA BSS ==> [0000200000 - 000074c4e0]
#3 [0037aa3000 - 0037fefcf0] RAMDISK ==> [0037aa3000 - 0037fefcf0]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ffffe20000000000-ffffe20001ffffff] PMD -> [ffff880001200000-ffff8800031fffff] on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0007e7b0
On node 0 totalpages: 517967
DMA zone: 2478 pages, LIFO batch:0
DMA32 zone: 505937 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 7f000000:7fc00000)
PERCPU: Allocating 47648 bytes of per cpu data
NR_CPUS: 8, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 508415
Policy zone: DMA32
Kernel command line: root=/dev/mapper/main-root ro quiet vga=791
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 1329.969 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2027952k/2072256k available (2280k kernel code, 43916k reserved, 1434k data, 368k init)
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. 2659.93 BogoMIPS (lpj=5319876)
Security Framework initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
ACPI: Core revision 20080609
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU U7700 @ 1.33GHz stepping 0d
Using local APIC timer interrupts.
APIC timer calibration result 8312306
Detected 8.312 MHz APIC timer.
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 2659.98 BogoMIPS (lpj=5319974)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU U7700 @ 1.33GHz stepping 0d
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (5319.92 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
domain 1: span 0-1 level NODE
groups: 0-1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
domain 1: span 0-1 level NODE
groups: 0-1
net_namespace: 1552 bytes
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at f8000000 - fbffffff
ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [C003] (0000:00)
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO
pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
pci 0000:10:00.0: PME# disabled
PCI: bridge 0000:00:1c.1 32bit mmio: [e0000000, e00fffff]
pci 0000:02:06.0: supports D1
pci 0000:02:06.0: supports D2
pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:06.0: PME# disabled
pci 0000:02:06.1: supports D1
pci 0000:02:06.1: supports D2
pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:06.1: PME# disabled
pci 0000:02:06.2: supports D1
pci 0000:02:06.2: supports D2
pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:06.2: PME# disabled
pci 0000:02:06.3: supports D1
pci 0000:02:06.3: supports D2
pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:06.3: PME# disabled
pci 0000:00:1e.0: transparent bridge
PCI: bridge 0000:00:1e.0 32bit mmio: [e0100000, e03fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11F._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C133._PRT]
ACPI: PCI Interrupt Link [C12F] (IRQs *10 11)
ACPI: PCI Interrupt Link [C130] (IRQs *10 11)
ACPI: PCI Interrupt Link [C131] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C132] (IRQs 10 11) *5
ACPI: PCI Interrupt Link [C142] (IRQs *10 11)
ACPI: PCI Interrupt Link [C143] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C144] (IRQs 10 *11)
ACPI Exception (pci_link-0189): AE_NOT_FOUND, Evaluating _PRS [20080609]
ACPI: Power Resource [C29F] (on)
ACPI: Power Resource [C1C7] (off)
ACPI: Power Resource [C3AD] (off)
ACPI: Power Resource [C3B0] (off)
ACPI: Power Resource [C3C3] (off)
ACPI: Power Resource [C3C4] (off)
ACPI: Power Resource [C3C5] (off)
ACPI: Power Resource [C3C6] (off)
ACPI: Power Resource [C3C7] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: parse allocated resources
pnp 00:00: add mem 0x0-0x9ffff flags 0x1
pnp 00:00: add mem 0xe0000-0xfffff flags 0x0
pnp 00:00: add mem 0x100000-0x7e7fffff flags 0x1
pnp 00:00: PNP0c01: calling quirk_system_pci_resources+0x0/0x179
pnp 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: parse allocated resources
pnp 00:01: add io 0xcf8-0xcff flags 0x1
pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:02: parse allocated resources
pnp 00:02: add io 0x560-0x56f flags 0x1
pnp 00:02: add io 0x570-0x57f flags 0x1
pnp 00:02: add mem 0xfed40000-0xfed44fff flags 0x1
pnp 00:02: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
pnp 00:03: parse allocated resources
pnp 00:03: add io 0xf0-0xff flags 0x1
pnp 00:03: add irq 13 flags 0x1
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: parse allocated resources
pnp 00:04: add io 0x0-0xf flags 0x1
pnp 00:04: add io 0x80-0x8f flags 0x1
pnp 00:04: add io 0xc0-0xdf flags 0x1
pnp 00:04: add dma 4 flags 0x2
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: parse allocated resources
pnp 00:05: add io 0x61-0x61 flags 0x1
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: parse allocated resources
pnp 00:06: add io 0x70-0x71 flags 0x1
pnp 00:06: add io 0x72-0x73 flags 0x1
pnp 00:06: add irq 8 flags 0x1
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: parse allocated resources
pnp 00:07: add mem 0xfed00000-0xfed003ff flags 0x0
pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:08: parse allocated resources
pnp 00:08: add io 0x60-0x60 flags 0x1
pnp 00:08: add io 0x64-0x64 flags 0x1
pnp 00:08: add irq 1 flags 0x1
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: parse allocated resources
pnp 00:09: add irq 12 flags 0x1
pnp 00:09: Plug and Play ACPI device, IDs SYN0130 SYN0100 SYN0002 PNP0f13 (active)
pnp 00:0a: parse allocated resources
pnp 00:0a: add io 0x10-0x1f flags 0x1
pnp 00:0a: add io 0x24-0x3f flags 0x1
pnp 00:0a: add io 0x4e-0x4f flags 0x1
pnp 00:0a: add io 0x50-0x53 flags 0x1
pnp 00:0a: add io 0x63-0x63 flags 0x1
pnp 00:0a: add io 0x65-0x65 flags 0x1
pnp 00:0a: add io 0x67-0x67 flags 0x1
pnp 00:0a: add io 0x74-0x77 flags 0x1
pnp 00:0a: add io 0x90-0x9f flags 0x1
pnp 00:0a: add io 0xa4-0xbd flags 0x1
pnp 00:0a: add io 0x500-0x55f flags 0x1
pnp 00:0a: add io 0x800-0x80f flags 0x1
pnp 00:0a: add mem 0xffb00000-0xffbfffff flags 0x0
pnp 00:0a: add mem 0xfff00000-0xffffffff flags 0x0
pnp 00:0a: PNP0c02: calling quirk_system_pci_resources+0x0/0x179
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: parse allocated resources
pnp 00:0b: add irq 23 flags 0x1
pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
pnp 00:0c: parse allocated resources
pnp 00:0c: add io 0x4d0-0x4d1 flags 0x1
pnp 00:0c: add io 0x2f8-0x2ff flags 0x1
pnp 00:0c: add io 0x3f8-0x3ff flags 0x1
pnp 00:0c: add io 0x1000-0x107f flags 0x1
pnp 00:0c: add io 0x1100-0x113f flags 0x1
pnp 00:0c: add io 0x1200-0x121f flags 0x1
pnp 00:0c: add mem 0xf8000000-0xfbffffff flags 0x1
pnp 00:0c: add mem 0xfec00000-0xfec000ff flags 0x1
pnp 00:0c: add mem 0xfed20000-0xfed3ffff flags 0x1
pnp 00:0c: add mem 0xfed45000-0xfed8ffff flags 0x1
pnp 00:0c: add mem 0xfed90000-0xfed99fff flags 0x1
pnp 00:0c: PNP0c02: calling quirk_system_pci_resources+0x0/0x179
pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: parse allocated resources
pnp 00:0d: add mem 0xcee00-0xcffff flags 0x0
pnp 00:0d: add mem 0xd2000-0xd3fff flags 0x0
pnp 00:0d: add mem 0xfeda0000-0xfedbffff flags 0x1
pnp 00:0d: add mem 0xfee00000-0xfee00fff flags 0x1
pnp 00:0d: PNP0c02: calling quirk_system_pci_resources+0x0/0x179
pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
pnp: the driver 'system' has been registered
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xe0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x7e7fffff could not be reserved
system 00:00: driver attached
system 00:0a: ioport range 0x500-0x55f has been reserved
system 00:0a: ioport range 0x800-0x80f has been reserved
system 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved
system 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved
system 00:0a: driver attached
system 00:0c: ioport range 0x4d0-0x4d1 has been reserved
system 00:0c: ioport range 0x2f8-0x2ff has been reserved
system 00:0c: ioport range 0x3f8-0x3ff has been reserved
system 00:0c: ioport range 0x1000-0x107f has been reserved
system 00:0c: ioport range 0x1100-0x113f has been reserved
system 00:0c: ioport range 0x1200-0x121f has been reserved
system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved
system 00:0c: iomem range 0xfec00000-0xfec000ff could not be reserved
system 00:0c: iomem range 0xfed20000-0xfed3ffff could not be reserved
system 00:0c: iomem range 0xfed45000-0xfed8ffff could not be reserved
system 00:0c: iomem range 0xfed90000-0xfed99fff could not be reserved
system 00:0c: driver attached
system 00:0d: iomem range 0xcee00-0xcffff has been reserved
system 00:0d: iomem range 0xd2000-0xd3fff has been reserved
system 00:0d: iomem range 0xfeda0000-0xfedbffff could not be reserved
system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:0d: driver attached
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:10
pci 0000:00:1c.1: IO window: disabled
pci 0000:00:1c.1: MEM window: 0xe0000000-0xe00fffff
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03
pci 0000:02:06.0: IO window: 0x003000-0x0030ff
pci 0000:02:06.0: IO window: 0x003400-0x0034ff
pci 0000:02:06.0: PREFETCH window: 0x80000000-0x83ffffff
pci 0000:02:06.0: MEM window: 0x84000000-0x87ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0: IO window: 0x3000-0x3fff
pci 0000:00:1e.0: MEM window: 0xe0100000-0xe03fffff
pci 0000:00:1e.0: PREFETCH window: 0x00000080000000-0x00000083ffffff
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 08 index 0 mmio: [0, 0]
bus: 08 index 1 mmio: [0, 0]
bus: 08 index 2 mmio: [0, 0]
bus: 08 index 3 mmio: [0, 0]
bus: 10 index 0 mmio: [0, 0]
bus: 10 index 1 mmio: [e0000000, e00fffff]
bus: 10 index 2 mmio: [0, 0]
bus: 10 index 3 mmio: [0, 0]
bus: 02 index 0 io port: [3000, 3fff]
bus: 02 index 1 mmio: [e0100000, e03fffff]
bus: 02 index 2 mmio: [80000000, 83ffffff]
bus: 02 index 3 io port: [0, ffff]
bus: 02 index 4 mmio: [0, ffffffffffffffff]
bus: 03 index 0 io port: [3000, 30ff]
bus: 03 index 1 io port: [3400, 34ff]
bus: 03 index 2 mmio: [80000000, 83ffffff]
bus: 03 index 3 mmio: [84000000, 87ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 5427k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1220911412.153:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 3971
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: found MSI capability
pci_express 0000:00:1c.1:pcie00: allocate port service
pci_express 0000:00:1c.1:pcie03: allocate port service
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20004a80000, using 3072k, total 7616k
vesafb: mode is 1024x768x16, linelength=2048, pages=3
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.103
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
pnp: the driver 'serial' has been registered
serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
0000:00:03.3: ttyS0 at I/O 0x2040 (irq = 17) is a 16550A
brd: module loaded
pnp: the driver 'i8042 kbd' has been registered
i8042 kbd 00:08: driver attached
pnp: the driver 'i8042 aux' has been registered
i8042 aux 00:09: driver attached
PNP: PS/2 Controller [PNP0303:C29C,PNP0f13:C29D] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
pnp: the driver 'rtc_cmos' has been registered
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, hpet irqs
rtc_cmos 00:06: driver attached
cpuidle: using governor ladder
cpuidle: using governor menu
TCP bic registered
NET: Registered protocol family 17
rtc_cmos 00:06: setting system clock to 2008-09-08 22:03:33 UTC (1220911413)
Freeing unused kernel memory: 368k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: Transitioning device [C3B1] to D3
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [C3B1] (off)
ACPI: Transitioning device [C3B2] to D3
fan PNP0C0B:01: registered as cooling_device1
ACPI: Fan [C3B2] (off)
ACPI: Transitioning device [C3C8] to D3
fan PNP0C0B:02: registered as cooling_device2
ACPI: Fan [C3C8] (off)
ACPI: Transitioning device [C3C9] to D3
fan PNP0C0B:03: registered as cooling_device3
ACPI: Fan [C3C9] (off)
ACPI: Transitioning device [C3CA] to D3
fan PNP0C0B:04: registered as cooling_device4
ACPI: Fan [C3CA] (off)
ACPI: Transitioning device [C3CB] to D3
fan PNP0C0B:05: registered as cooling_device5
ACPI: Fan [C3CB] (off)
ACPI: Transitioning device [C3CC] to D3
fan PNP0C0B:06: registered as cooling_device6
ACPI: Fan [C3CC] (off)
ACPI: SSDT 7E7DBD42, 027F (r1 HP Cpu0Ist 3000 INTL 20060317)
ACPI: SSDT 7E7DC046, 05FA (r1 HP Cpu0Cst 3001 INTL 20060317)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:00: registered as cooling_device7
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7E7DBC7A, 00C8 (r1 HP Cpu1Ist 3000 INTL 20060317)
ACPI: SSDT 7E7DBFC1, 0085 (r1 HP Cpu1Cst 3000 INTL 20060317)
Marking TSC unstable due to TSC halts in idle
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:01: registered as cooling_device8
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ6] (25 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ0] (45 C)
thermal LNXTHERM:03: registered as thermal_zone2
ACPI: Thermal Zone [TZ1] (48 C)
thermal LNXTHERM:04: registered as thermal_zone3
ACPI: Thermal Zone [TZ3] (35 C)
thermal LNXTHERM:05: registered as thermal_zone4
ACPI: Thermal Zone [TZ4] (24 C)
thermal LNXTHERM:06: registered as thermal_zone5
ACPI: Thermal Zone [TZ5] (0 C)
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
e1000e 0000:00:19.0: setting latency timer to 64
No dock devices found.
SCSI subsystem initialized
USB Universal Host Controller Interface driver v3.0
libata version 3.00 loaded.
ricoh-mmc: Ricoh MMC Controller disabling driver
ricoh-mmc: Copyright(c) Philip Langdale
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1e:68:5e:3b:04
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 4, PHY: 6, PBA No: ffffff-0ff
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00002080
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Clocksource tsc unstable (delta = -105176111 ns)
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 17, io base 0x000020a0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0641000
usb 1-1: new full speed USB device using uhci_hcd and address 2
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
hub 1-0:1.0: unable to enumerate USB device on port 1
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 20, io base 0x000020c0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: irq 22, io base 0x000020e0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002100
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using uhci_hcd and address 3
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe0648000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
usb 1-1: configuration #1 chosen from 1 choice
ricoh-mmc: Ricoh MMC controller found at 0000:02:06.3 [1180:0843] (rev 11)
ricoh-mmc: Controller is now disabled.
ohci1394 0000:02:06.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[e0101000-e01017ff] Max Packet=[2048] IR/IT contexts=[4/4]
sdhci-pci 0000:02:06.2: SDHCI controller found [1180:0822] (rev 21)
sdhci-pci 0000:02:06.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
mmc0: SDHCI controller on PCI [0000:02:06.2] using PIO
ata_piix 0000:00:1f.1: version 2.12
ata_piix 0000:00:1f.1: quirky BIOS, skipping spindown on poweroff
ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
Uniform Multi-Platform E-IDE driver
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2120 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2128 irq 15
ata1.00: ATA-7: SAMSUNG HS122JC, GQ100-04, max UDMA/100
ata1.00: 234441648 sectors, multi 16: LBA
ata1.01: ATAPI: MATSHITADVD-RAM UJ-852S, 1.02, max MWDMA2
ata1.00: configured for UDMA/100
ata1.01: configured for MWDMA2
ata2: port disabled. ignoring.
isa bounce pool size: 16 pages
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HS122JC GQ10 PQ: 0 ANSI: 5
scsi 0:0:1:0: CD-ROM MATSHITA DVD-RAM UJ-852S 1.02 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 <<4>Driver 'sr' needs updating - please use bus_type methods
sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 0:0:1:0: Attached scsi generic sg1 type 5
usb 4-2: new full speed USB device using uhci_hcd and address 2
usb 4-2: configuration #1 chosen from 1 choice
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
ieee1394: Host added: ID:BUS[0-00:1023] GUID[001b249929192210]
PM: Starting manual resume from disk
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
udevd version 125 started
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ACPI: AC Adapter [C23B] (off-line)
input: Power Button (FF) as /class/input/input1
input: PC Speaker as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input3
Yenta: CardBus bridge found at 0000:02:06.0 [103c:30c9]
ACPI: Sleep Button (CM) [C2BF]
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [C155]
agpgart-intel 0000:00:00.0: Intel 965GM Chipset
agpgart-intel 0000:00:00.0: detected 7676K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
Yenta: ISA IRQ mask 0x0cb8, PCI irq 18
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe03fffff
pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
ACPI: Battery Slot [C23D] (battery present)
acpi device:02: registered as cooling_device9
input: Video Bus as /class/input/input5
ACPI: WMI: Mapper loaded
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
iwlagn: Copyright(c) 2003-2008 Intel Corporation
ACPI: Video Device [C09A] (multi-head: yes rom: no post: no)
iwlagn 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:10:00.0: setting latency timer to 64
iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
iwlagn: Tunable channels: 11 802.11bg, 13 802.11a channels
iwlagn 0000:10:00.0: PCI INT A disabled
phy0: Selected rate control algorithm 'iwl-agn-rs'
input: PS/2 Generic Mouse as /class/input/input6
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:00:1b.0: setting latency timer to 64
Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa00000
input: SynPS/2 Synaptics TouchPad as /class/input/input7
EXT3 FS on dm-1, internal journal
loop: module loaded
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on dm-6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2097144k swap on /dev/mapper/main-swap. Priority:-1 extents:1 across:2097144k
iwlagn 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:10:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
firmware: requesting iwlwifi-4965-2.ucode
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
wlan0: authenticate with AP 00:14:c1:38:e5:15
wlan0: authenticated
wlan0: associate with AP 00:14:c1:38:e5:15
wlan0: RX AssocResp from 00:14:c1:38:e5:15 (capab=0x411 status=0 aid=1)
wlan0: associated
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
wlan0: no IPv6 routers present
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
domain 1: span 0-1 level CPU
groups: 0-1
domain 2: span 0-1 level NODE
groups: 0-1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
domain 1: span 0-1 level CPU
groups: 0-1
domain 2: span 0-1 level NODE
groups: 0-1
CE: __tick_program_event of hpet is stuck 4d4b8edbdd 4d4b8eef65
CE: increasing min_delta_ns 5000 to 10000 nsec
------------[ cut here ]------------
WARNING: at kernel/time/tick-oneshot.c:52 tick_dev_program_event+0x9c/0xd0()
Modules linked in: tcp_diag inet_diag i915 drm ipv6 ext2 coretemp acpi_cpufreq loop joydev snd_hda_intel snd_pcm_oss snd_pcm snd_mixer_oss snd_seq_dummy arc4 snd_seq_oss snd_seq_midi ecb snd_rawmidi snd_seq_midi_event snd_seq iwlagn pcmcia iwlcore video snd_timer snd_seq_device rfkill intel_agp wmi led_class yenta_socket rsrc_nonstatic container psmouse snd battery mac80211 output serio_raw pcspkr button soundcore evdev pcmcia_core ac snd_page_alloc iTCO_wdt cfg80211 ext3 jbd mbcache sha256_generic aes_x86_64 aes_generic cbc dm_crypt crypto_blkcipher dm_mirror dm_log dm_snapshot dm_mod sg sr_mod cdrom sd_mod piix ide_pci_generic ide_core ata_piix sdhci_pci ohci1394 sdhci ata_generic ieee1394 ricoh_mmc mmc_core libata ehci_hcd uhci_hcd scsi_mod dock e1000e thermal processor fan thermal_sys
Pid: 0, comm: swapper Not tainted 2.6.27-rc5 #74
Call Trace:
[<ffffffff802375d2>] warn_on_slowpath+0x58/0x7f
[<ffffffff80434a10>] ? printk+0x67/0x6f
[<ffffffff803183a5>] ? __next_cpu+0x19/0x26
[<ffffffff8024f2e7>] ? getnstimeofday+0x3a/0x96
[<ffffffff8024f2e7>] ? getnstimeofday+0x3a/0x96
[<ffffffff8024d35f>] ? ktime_get_ts+0x49/0x4e
[<ffffffff80252c9f>] tick_dev_program_event+0x9c/0xd0
[<ffffffff80252756>] tick_broadcast_oneshot_control+0xa3/0xfd
[<ffffffff80251fe7>] tick_notify+0x22f/0x385
[<ffffffff8024dc5b>] notifier_call_chain+0x33/0x5b
[<ffffffff8024dd17>] raw_notifier_call_chain+0xf/0x11
[<ffffffff80251a62>] clockevents_notify+0x2b/0x7a
[<ffffffffa000a00a>] acpi_state_timer_broadcast+0x41/0x43 [processor]
[<ffffffffa000a4dd>] acpi_idle_enter_bm+0x159/0x2bd [processor]
[<ffffffff803b5036>] cpuidle_idle_call+0x86/0xba
[<ffffffff8020b282>] cpu_idle+0x80/0xd4
[<ffffffff804323e7>] start_secondary+0x155/0x15a
---[ end trace d4b64a05d28c8218 ]---
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
Subsystem: Hewlett-Packard Company Device 30c9
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
Subsystem: Hewlett-Packard Company Device 30c9
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e0400000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 2000 [size=8]
Capabilities: <access denied>
Kernel modules: intelfb
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
Subsystem: Hewlett-Packard Company Device 30c9
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e0500000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:03.0 Communication controller: Intel Corporation Mobile PM965/GM965 MEI Controller (rev 0c)
Subsystem: Hewlett-Packard Company Device 30c9
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 255
Region 0: Memory at e0600000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:03.2 IDE interface: Intel Corporation Mobile PM965/GM965 PT IDER Controller (rev 0c) (prog-if 85 [Master SecO PriO])
Subsystem: Hewlett-Packard Company Device 30c9
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 0: I/O ports at 2008 [size=8]
Region 1: I/O ports at 2010 [size=4]
Region 2: I/O ports at 2018 [size=8]
Region 3: I/O ports at 2020 [size=4]
Region 4: I/O ports at 2030 [size=16]
Capabilities: <access denied>
Kernel modules: ata_generic, ide-pci-generic
00:03.3 Serial controller: Intel Corporation Mobile PM965/GM965 KT Controller (rev 0c) (prog-if 02)
Subsystem: Hewlett-Packard Company Device 30c9
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 2040 [size=8]
Region 1: Memory at e0601000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller: Intel Corporation 82566MM Gigabit Network Connection (rev 03)
Subsystem: Hewlett-Packard Company Device 30c9
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 0: Memory at e0620000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at e0640000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 2060 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
Subsystem: Hewlett-Packard Company Device 30c9
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 2080 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
Subsystem: Hewlett-Packard Company Device 30c9
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 20a0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20)
Subsystem: Hewlett-Packard Company Device 30c9
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e0641000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
Subsystem: Hewlett-Packard Company Device 30c9
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at e0644000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: e0000000-e00fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
Subsystem: Hewlett-Packard Company Device 30c9
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 20c0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
Subsystem: Hewlett-Packard Company Device 30c9
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at 20e0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
Subsystem: Hewlett-Packard Company Device 30c9
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 2100 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20)
Subsystem: Hewlett-Packard Company Device 30c9
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at e0648000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=06, sec-latency=32
I/O behind bridge: 00003000-00003fff
Memory behind bridge: e0100000-e03fffff
Prefetchable memory behind bridge: 0000000080000000-0000000083ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge: Intel Corporation 82801HBM (ICH8M-E) LPC Interface Controller (rev 03)
Subsystem: Hewlett-Packard Company Device 30c9
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Device 30c9
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 2120 [size=16]
Kernel driver in use: ata_piix
Kernel modules: ata_generic, ata_piix, ide-pci-generic, piix
02:06.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
Subsystem: Hewlett-Packard Company Device 30c9
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e0100000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 80000000-83fff000 (prefetchable)
Memory window 1: 84000000-87fff000
I/O window 0: 00003000-000030ff
I/O window 1: 00003400-000034ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
02:06.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) (prog-if 10)
Subsystem: Hewlett-Packard Company Device 30c9
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at e0101000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
02:06.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21)
Subsystem: Hewlett-Packard Company Device 30c9
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 20
Region 0: Memory at e0102000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci-pci
02:06.3 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev ff) (prog-if ff)
!!! Unknown header type 7f
Kernel driver in use: ricoh-mmc
Kernel modules: ricoh_mmc
10:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection (rev 61)
Subsystem: Intel Corporation Device 1100
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 509
Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn
Kernel modules: iwlagn