Re: [Bugme-new] [Bug 11543] New: kernel panic: softlockup intick_periodic() ???
From: j_kernel
Date: Wed Sep 17 2008 - 16:49:15 EST
On Wed, Sep 17, 2008 at 08:27:04PM +0400, Cyrill Gorcunov wrote:
> Joshua, could you please do one more thing - boot the kernel
> with "debug apic=debug nmi_watchdog=1" (among others) and
> publish dmsg?
dmesg from "debug apic=debug nmi_watchdog=2" is attached.
^
-J
--
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.27-rc5-22033-gd26acd9-dirty (root@ipp000) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #2 SMP Fri Sep 12 10:04:18 HST 2008
[ 0.000000] Command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc debug nmi_watchdog=2 show_msr=1 apic=debug console=tty0 console=ttyS0,115200n8
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff60000 (usable)
[ 0.000000] BIOS-e820: 00000000cff60000 - 00000000cff6a000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cff6a000 - 00000000cff80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x3ffffffff
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xcff60 max_arch_pfn = 0x3ffffffff
[ 0.000000] init_memory_mapping
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff60000 page 4k
[ 0.000000] kernel direct mapping tables up to cff60000 @ 8000-e000
[ 0.000000] last_map_addr: cff60000 end: cff60000
[ 0.000000] init_memory_mapping
[ 0.000000] 0100000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ c000-16000
[ 0.000000] last_map_addr: 230000000 end: 230000000
[ 0.000000] RAMDISK: 37e0f000 - 37fef850
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F75D0, 0024 (r2 PTLTD )
[ 0.000000] ACPI: XSDT CFF656FA, 0064 (r1 PTLTD XSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP CFF6970E, 00F4 (r3 NVIDIA CK8S 6040000 PTL_ F4240)
[ 0.000000] ACPI: DSDT CFF6575E, 3F3C (r1 NVIDIA CK8 6040000 MSFT 3000000)
[ 0.000000] ACPI: FACS CFF6AFC0, 0040
[ 0.000000] ACPI: SSDT CFF69802, 0574 (r1 AMD POWERNOW 6040000 AMD 1)
[ 0.000000] ACPI: SRAT CFF69D76, 0110 (r1 AMD HAMMER 6040000 AMD 1)
[ 0.000000] ACPI: SPCR CFF69E86, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1)
[ 0.000000] ACPI: MCFG CFF69ED6, 003C (r1 PTLTD MCFG 6040000 LTP 0)
[ 0.000000] ACPI: HPET CFF69F12, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1)
[ 0.000000] ACPI: APIC CFF69F4A, 008E (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT CFF69FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 2 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 3 -> Node 1
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-d0000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-130000000
[ 0.000000] SRAT: Node 1 PXM 1 130000000-230000000
[ 0.000000] NUMA: Allocated memnodemap from 11000 - 15680
[ 0.000000] NUMA: Using 20 for the hash shift.
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [0000000000015680 - 000000000002067f]
[ 0.000000] bootmap [0000000000021000 - 0000000000046fff] pages 26
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 0000f96910] TEXT DATA BSS ==> [0000200000 - 0000f96910]
[ 0.000000] #3 [0037e0f000 - 0037fef850] RAMDISK ==> [0037e0f000 - 0037fef850]
[ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
[ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
[ 0.000000] #6 [000000c000 - 0000011000] PGTABLE ==> [000000c000 - 0000011000]
[ 0.000000] #7 [0000011000 - 0000015680] MEMNODEMAP ==> [0000011000 - 0000015680]
[ 0.000000] Bootmem setup node 1 0000000130000000-0000000230000000
[ 0.000000] NODE_DATA [0000000130000000 - 000000013000afff]
[ 0.000000] bootmap [000000013000b000 - 000000013002afff] pages 20
[ 0.000000] (8 early reservations) ==> bootmem [0130000000 - 0230000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
[ 0.000000] #2 [0000200000 - 0000f96910] TEXT DATA BSS
[ 0.000000] #3 [0037e0f000 - 0037fef850] RAMDISK
[ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved
[ 0.000000] #5 [0000008000 - 000000c000] PGTABLE
[ 0.000000] #6 [000000c000 - 0000011000] PGTABLE
[ 0.000000] #7 [0000011000 - 0000015680] MEMNODEMAP
[ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes.
[ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes.
[ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes.
[ 0.000000] found SMP MP-table at [ffff8800000f7600] 000f7600
[ 0.000000] [ffffe20000000000-ffffe200071fffff] PMD -> [ffff880028200000-ffff88002e1fffff] on node 0
[ 0.000000] [ffffe20007200000-ffffe2000d1fffff] PMD -> [ffff880130200000-ffff8801361fffff] on node 1
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000cff60
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] 1: 0x00130000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 1048317
[ 0.000000] DMA zone: 307 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 823232 pages, LIFO batch:31
[ 0.000000] Normal zone: 192000 pages, LIFO batch:31
[ 0.000000] On node 1 totalpages: 1048576
[ 0.000000] Normal zone: 1024000 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] mapped APIC to ffffffffff5fc000 ( fee00000)
[ 0.000000] mapped IOAPIC to ffffffffff5fb000 (00000000fec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
[ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff60000 - 00000000cff6a000
[ 0.000000] PM: Registered nosave memory: 00000000cff6a000 - 00000000cff80000
[ 0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
[ 0.000000] PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
[ 0.000000] PERCPU: Allocating 51872 bytes of per cpu data
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 2
[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 2039539
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc debug nmi_watchdog=2 show_msr=1 apic=debug console=tty0 console=ttyS0,115200n8
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PIT calibration value
[ 0.000000] Detected 2799.937 MHz processor.
[ 0.003333] spurious 8259A interrupt: IRQ7.
[ 0.003333] Console: colour VGA+ 80x25
[ 0.003333] console [tty0] enabled
[ 0.003333] console [ttyS0] enabled
[ 0.003333] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.003333] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.003333] ... MAX_LOCK_DEPTH: 48
[ 0.003333] ... MAX_LOCKDEP_KEYS: 8191
[ 0.003333] ... CLASSHASH_SIZE: 4096
[ 0.003333] ... MAX_LOCKDEP_ENTRIES: 8192
[ 0.003333] ... MAX_LOCKDEP_CHAINS: 16384
[ 0.003333] ... CHAINHASH_SIZE: 8192
[ 0.003333] memory used by lock dependency info: 3839 kB
[ 0.003333] per task-struct memory footprint: 1920 bytes
[ 0.003333] Checking aperture...
[ 0.003333] No AGP bridge found
[ 0.003333] Node 0: aperture @ 0 size 32 MB
[ 0.003333] Your BIOS doesn't leave a aperture memory hole
[ 0.003333] Please enable the IOMMU option in the BIOS setup
[ 0.003333] This costs you 64 MB of RAM
[ 0.003333] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.003333] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.003333] Memory: 8108304k/9175040k available (3897k kernel code, 279268k reserved, 2242k data, 676k init)
[ 0.003333] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.003333] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2
[ 0.003333] hpet clockevent registered
[ 0.003341] Calibrating delay loop (skipped), value calculated using timer frequency.. 5602.20 BogoMIPS (lpj=9333123)
[ 0.010027] Security Framework initialized
[ 0.016692] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.026447] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.029173] Mount-cache hash table entries: 256
[ 0.030310] Initializing cgroup subsys ns
[ 0.033338] Initializing cgroup subsys cpuacct
[ 0.036668] Initializing cgroup subsys memory
[ 0.040007] Initializing cgroup subsys devices
[ 0.043340] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.046665] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.049999] CPU 0/0 -> Node 0
[ 0.053332] tseg: 00cff80000
[ 0.056665] CPU: Physical Processor ID: 0
[ 0.059998] CPU: Processor Core ID: 0
[ 0.063336] using C1E aware idle routine
[ 0.066685] ACPI: Core revision 20080609
[ 0.076723] Getting VERSION: 80050010
[ 0.079997] Getting VERSION: 80050010
[ 0.083330] Getting ID: 0
[ 0.086663] Getting ID: ff000000
[ 0.089994] Getting LVT0: 10000
[ 0.089996] Getting LVT1: 10000
[ 0.093330] masked ExtINT on CPU#0
[ 0.096903] ENABLING IO-APIC IRQs
[ 0.099995] init IO_APIC IRQs
[ 0.103329] IO-APIC (apicid-pin) 4-0 not connected.
[ 0.108339] IOAPIC[0]: Set routing entry (4-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
[ 0.110000] IOAPIC[0]: Set routing entry (4-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
[ 0.113325] IOAPIC[0]: Set routing entry (4-3 -> 0x33 -> IRQ 3 Mode:0 Active:0)
[ 0.113332] IOAPIC[0]: Set routing entry (4-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
[ 0.116665] IOAPIC[0]: Set routing entry (4-5 -> 0x35 -> IRQ 5 Mode:0 Active:0)
[ 0.119998] IOAPIC[0]: Set routing entry (4-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
[ 0.123331] IOAPIC[0]: Set routing entry (4-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
[ 0.126664] IOAPIC[0]: Set routing entry (4-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
[ 0.129997] IOAPIC[0]: Set routing entry (4-9 -> 0x39 -> IRQ 9 Mode:1 Active:1)
[ 0.133330] IOAPIC[0]: Set routing entry (4-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
[ 0.136663] IOAPIC[0]: Set routing entry (4-11 -> 0x3b -> IRQ 11 Mode:0 Active:0)
[ 0.139997] IOAPIC[0]: Set routing entry (4-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
[ 0.143330] IOAPIC[0]: Set routing entry (4-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
[ 0.146663] IOAPIC[0]: Set routing entry (4-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
[ 0.149996] IOAPIC[0]: Set routing entry (4-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
[ 0.153328] IO-APIC (apicid-pin) 4-16, 4-17, 4-18, 4-19, 4-20, 4-21, 4-22, 4-23 not connected.
[ 0.163485] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.200845] CPU0: Dual-Core AMD Opteron(tm) Processor 2220 stepping 03
[ 0.206654] Using local APIC timer interrupts.
[ 0.213320] APIC timer calibration result 12499727
[ 0.216654] Detected 12.499 MHz APIC timer.
[ 0.220144] lockdep: fixing up alternatives.
[ 0.223342] Booting processor 1/1 ip 6000
[ 0.003333] Initializing CPU#1
[ 0.003333] masked ExtINT on CPU#1
[ 0.003333] Calibrating delay using timer specific routine.. 5602.22 BogoMIPS (lpj=9333158)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.003333] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.003333] CPU 1/1 -> Node 0
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 1
[ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.320369] CPU1: Dual-Core AMD Opteron(tm) Processor 2220 stepping 03
[ 0.330023] lockdep: fixing up alternatives.
[ 0.333325] Booting processor 2/2 ip 6000
[ 0.003333] Initializing CPU#2
[ 0.003333] masked ExtINT on CPU#2
[ 0.003333] Calibrating delay using timer specific routine.. 5602.25 BogoMIPS (lpj=9333200)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.003333] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.003333] CPU 2/2 -> Node 1
[ 0.003333] CPU: Physical Processor ID: 1
[ 0.003333] CPU: Processor Core ID: 0
[ 0.003333] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[ 0.430543] CPU2: Dual-Core AMD Opteron(tm) Processor 2220 stepping 03
[ 0.440047] lockdep: fixing up alternatives.
[ 0.443324] Booting processor 3/3 ip 6000
[ 0.003333] Initializing CPU#3
[ 0.003333] masked ExtINT on CPU#3
[ 0.003333] Calibrating delay using timer specific routine.. 5602.23 BogoMIPS (lpj=9333179)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.003333] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.003333] CPU 3/3 -> Node 1
[ 0.003333] CPU: Physical Processor ID: 1
[ 0.003333] CPU: Processor Core ID: 1
[ 0.003333] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[ 0.540532] CPU3: Dual-Core AMD Opteron(tm) Processor 2220 stepping 03
[ 0.549981] Brought up 4 CPUs
[ 0.553128] Total of 4 processors activated (22408.91 BogoMIPS).
[ 0.553363] Testing NMI watchdog ... OK.
[ 0.626894] net_namespace: 968 bytes
[ 0.630205] xor: automatically using best checksumming function: generic_sse
[ 0.649969] generic_sse: 8630.400 MB/sec
[ 0.653302] xor: using function: generic_sse (8630.400 MB/sec)
[ 0.656696] NET: Registered protocol family 16
[ 0.660253] No dock devices found.
[ 0.663504] node 0 link 2: io port [1000, 3fff]
[ 0.666636] TOM: 00000000d0000000 aka 3328M
[ 0.669969] node 0 link 2: mmio [d0000000, dfffffff]
[ 0.676635] node 0 link 2: mmio [a0000, bffff]
[ 0.680343] node 0 link 2: mmio [e0000000, e7ffffff]
[ 0.686635] TOM2: 0000000230000000 aka 8960M
[ 0.689969] bus: [00,ff] on node 0 link 2
[ 0.693307] bus: 00 index 0 io port: [0, ffff]
[ 0.696635] bus: 00 index 1 mmio: [d0000000, ffffffff]
[ 0.699968] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.703302] bus: 00 index 3 mmio: [230000000, fcffffffff]
[ 0.706647] ACPI: bus type pci registered
[ 0.710112] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 4
[ 0.713303] PCI: MCFG area at e0000000 reserved in E820
[ 0.716740] PCI: Using MMCONFIG at e0000000 - e04fffff
[ 0.719968] PCI: Using configuration type 1 for base access
[ 0.728437] ACPI: EC: Look up EC in DSDT
[ 0.736968] ACPI: Interpreter enabled
[ 0.739969] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.745030] ACPI: Using IOAPIC for interrupt routing
[ 0.755036] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.756944] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.759972] pci 0000:00:01.1: PME# disabled
[ 0.763342] pci 0000:00:02.0: supports D1
[ 0.766635] pci 0000:00:02.0: supports D2
[ 0.769968] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.773303] pci 0000:00:02.0: PME# disabled
[ 0.776673] pci 0000:00:02.1: supports D1
[ 0.779968] pci 0000:00:02.1: supports D2
[ 0.783302] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.786636] pci 0000:00:02.1: PME# disabled
[ 0.790205] pci 0000:00:08.0: supports D1
[ 0.793301] pci 0000:00:08.0: supports D2
[ 0.796635] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.799971] pci 0000:00:08.0: PME# disabled
[ 0.803350] pci 0000:00:09.0: supports D1
[ 0.806635] pci 0000:00:09.0: supports D2
[ 0.809968] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.813304] pci 0000:00:09.0: PME# disabled
[ 0.816667] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.819969] pci 0000:00:0a.0: PME# disabled
[ 0.823336] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.826636] pci 0000:00:0d.0: PME# disabled
[ 0.829998] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.833302] pci 0000:00:0f.0: PME# disabled
[ 0.836887] pci 0000:01:04.0: supports D1
[ 0.839968] pci 0000:01:04.0: supports D2
[ 0.846644] pci 0000:00:06.0: transparent bridge
[ 0.849969] PCI: bridge 0000:00:06.0 io port: [3000, 3fff]
[ 0.853303] PCI: bridge 0000:00:06.0 32bit mmio: [d0100000, d01fffff]
[ 0.856636] PCI: bridge 0000:00:06.0 32bit mmio pref: [d8000000, dfffffff]
[ 0.860036] pci 0000:02:00.0: supports D1
[ 0.863330] PCI: bridge 0000:00:0a.0 32bit mmio: [d0200000, d02fffff]
[ 0.866721] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.870040] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 0.873324] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
[ 0.876660] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
[ 0.879993] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR5._PRT]
[ 0.908235] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.918928] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 *10 11 14 15 16 17 18 19 20 21 22 23)
[ 0.925216] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.932886] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.940495] ACPI: PCI Interrupt Link [LK1E] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.951499] ACPI: PCI Interrupt Link [LK2E] (IRQs 5 7 10 *11 14 15 16 17 18 19 20 21 22 23)
[ 0.960946] ACPI: PCI Interrupt Link [LK3E] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.971949] ACPI: PCI Interrupt Link [LK4E] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.979551] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.987162] ACPI: PCI Interrupt Link [LUS0] (IRQs 5 7 *10 11 14 15 16 17 18 19 20 21 22 23)
[ 0.996787] ACPI: PCI Interrupt Link [LMA2] (IRQs 5 7 10 *11 14 15 16 17 18 19 20 21 22 23)
[ 1.006297] ACPI: PCI Interrupt Link [LUS2] (IRQs *5 7 10 11 14 15 16 17 18 19 20 21 22 23)
[ 1.012659] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 *10 11 14 15 16 17 18 19 20 21 22 23)
[ 1.019013] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
[ 1.026787] ACPI: PCI Interrupt Link [LPID] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
[ 1.037162] ACPI: PCI Interrupt Link [LTID] (IRQs 5 7 10 *11 14 15 16 17 18 19 20 21 22 23)
[ 1.047300] ACPI: PCI Interrupt Link [LSI1] (IRQs 5 7 *10 11 14 15 16 17 18 19 20 21 22 23)
[ 1.056787] ACPI: PCI Interrupt Link [LSI2] (IRQs 5 7 10 *11 14 15 16 17 18 19 20 21 22 23)
[ 1.066914] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 1.070030] pnp: PnP ACPI init
[ 1.073313] ACPI: bus type pnp registered
[ 1.077375] IOAPIC[0]: Set routing entry (4-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
[ 1.080619] IOAPIC[0]: Set routing entry (4-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
[ 1.083402] IOAPIC[0]: Set routing entry (4-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
[ 1.087135] IOAPIC[0]: Set routing entry (4-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
[ 1.093699] IOAPIC[0]: Set routing entry (4-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
[ 1.097564] IOAPIC[0]: Set routing entry (4-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
[ 1.104093] pnp: PnP ACPI: found 14 devices
[ 1.106636] ACPI: ACPI bus type pnp unregistered
[ 1.113565] SCSI subsystem initialized
[ 1.116800] libata version 3.00 loaded.
[ 1.120253] usbcore: registered new interface driver usbfs
[ 1.123369] usbcore: registered new interface driver hub
[ 1.130010] usbcore: registered new device driver usb
[ 1.133672] PCI: Using ACPI for IRQ routing
[ 1.136637] number of MP IRQ sources: 16.
[ 1.139968] number of IO-APIC #4 registers: 24.
[ 1.143301] testing the IO APIC.......................
[ 1.146640]
[ 1.148314] IO APIC #4......
[ 1.149968] .... register #00: 04000000
[ 1.153302] ....... : physical APIC id: 04
[ 1.156635] .... register #01: 00170011
[ 1.159968] ....... : max redirection entries: 0017
[ 1.163301] ....... : PRQ implemented: 0
[ 1.166635] ....... : IO APIC version: 0011
[ 1.169968] .... register #02: 04000000
[ 1.173301] ....... : arbitration: 04
[ 1.176635] .... IRQ redirection table:
[ 1.179968] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
[ 1.183305] 00 000 1 0 0 0 0 0 0 00
[ 1.186638] 01 00F 0 0 0 0 0 1 1 31
[ 1.193305] 02 00F 0 0 0 0 0 1 1 30
[ 1.199971] 03 00F 0 0 0 0 0 1 1 33
[ 1.203305] 04 00F 0 0 0 0 0 1 1 34
[ 1.209971] 05 00F 1 0 0 0 0 1 1 35
[ 1.216638] 06 00F 0 0 0 0 0 1 1 36
[ 1.219971] 07 00F 0 0 0 0 0 1 1 37
[ 1.226638] 08 00F 0 0 0 0 0 1 1 38
[ 1.233305] 09 00F 0 1 0 1 0 1 1 39
[ 1.236638] 0a 00F 1 0 0 0 0 1 1 3A
[ 1.243305] 0b 00F 1 0 0 0 0 1 1 3B
[ 1.249971] 0c 00F 0 0 0 0 0 1 1 3C
[ 1.253305] 0d 00F 0 0 0 0 0 1 1 3D
[ 1.259971] 0e 00F 0 0 0 0 0 1 1 3E
[ 1.263305] 0f 00F 0 0 0 0 0 1 1 3F
[ 1.269974] 10 000 1 0 0 0 0 0 0 00
[ 1.276638] 11 000 1 0 0 0 0 0 0 00
[ 1.279971] 12 000 1 0 0 0 0 0 0 00
[ 1.286638] 13 000 1 0 0 0 0 0 0 00
[ 1.293305] 14 000 1 0 0 0 0 0 0 00
[ 1.296638] 15 000 1 0 0 0 0 0 0 00
[ 1.303305] 16 000 1 0 0 0 0 0 0 00
[ 1.309971] 17 000 1 0 0 0 0 0 0 00
[ 1.313301] IRQ to pin mappings:
[ 1.316635] IRQ0 -> 0:2
[ 1.320918] IRQ1 -> 0:1
[ 1.324251] IRQ3 -> 0:3
[ 1.327009] IRQ4 -> 0:4
[ 1.329968] IRQ5 -> 0:5
[ 1.332701] IRQ6 -> 0:6
[ 1.334254] IRQ7 -> 0:7
[ 1.337587] IRQ8 -> 0:8
[ 1.340914] IRQ9 -> 0:9
[ 1.343676] IRQ10 -> 0:10
[ 1.346635] IRQ11 -> 0:11
[ 1.349540] IRQ12 -> 0:12
[ 1.350999] IRQ13 -> 0:13
[ 1.354339] IRQ14 -> 0:14
[ 1.357670] IRQ15 -> 0:15
[ 1.361004] .................................... done.
[ 1.376899] PCI-DMA: Disabling AGP.
[ 1.381108] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 1.383302] PCI-DMA: using GART IOMMU.
[ 1.386637] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.390525] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 1.397011] hpet0: 3 32-bit timers, 25000000 Hz
[ 1.401065] ACPI: RTC can wake from S4
[ 1.403313] Switched to high resolution mode on CPU 0
[ 1.403376] Switched to high resolution mode on CPU 2
[ 1.403396] Switched to high resolution mode on CPU 3
[ 1.406608] Switched to high resolution mode on CPU 1
[ 1.436703] system 00:00: iomem range 0xffc00000-0xffffffff could not be reserved
[ 1.444539] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 1.452372] system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 1.460206] system 00:00: iomem range 0xfed00000-0xfed00fff has been reserved
[ 1.467553] system 00:03: iomem range 0xd0000000-0xd0007fff has been reserved
[ 1.474888] system 00:04: ioport range 0x1000-0x107f has been reserved
[ 1.481616] system 00:04: ioport range 0x1080-0x10ff has been reserved
[ 1.488341] system 00:04: ioport range 0x1400-0x147f has been reserved
[ 1.495066] system 00:04: ioport range 0x1480-0x14ff has been reserved
[ 1.501791] system 00:04: ioport range 0x1800-0x187f has been reserved
[ 1.508520] system 00:04: ioport range 0x1880-0x18ff has been reserved
[ 1.515244] system 00:04: ioport range 0x2440-0x247f has been reserved
[ 1.521967] system 00:04: ioport range 0x2400-0x243f has been reserved
[ 1.528705] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 1.535252] system 00:07: ioport range 0xc05-0xc06 has been reserved
[ 1.542958] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01
[ 1.549075] pci 0000:00:06.0: IO window: 0x3000-0x3fff
[ 1.554587] pci 0000:00:06.0: MEM window: 0xd0100000-0xd01fffff
[ 1.560884] pci 0000:00:06.0: PREFETCH window: 0x000000d8000000-0x000000dfffffff
[ 1.568802] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
[ 1.574919] pci 0000:00:0a.0: IO window: disabled
[ 1.579997] pci 0000:00:0a.0: MEM window: 0xd0200000-0xd02fffff
[ 1.586290] pci 0000:00:0a.0: PREFETCH window: 0x000000d1000000-0x000000d10fffff
[ 1.594222] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:03
[ 1.600336] pci 0000:00:0d.0: IO window: disabled
[ 1.605406] pci 0000:00:0d.0: MEM window: disabled
[ 1.610562] pci 0000:00:0d.0: PREFETCH window: disabled
[ 1.616154] pci 0000:00:0f.0: PCI bridge, secondary bus 0000:04
[ 1.622273] pci 0000:00:0f.0: IO window: disabled
[ 1.627350] pci 0000:00:0f.0: MEM window: disabled
[ 1.632508] pci 0000:00:0f.0: PREFETCH window: disabled
[ 1.638115] pci 0000:00:06.0: setting latency timer to 64
[ 1.643717] pci 0000:00:0a.0: setting latency timer to 64
[ 1.654201] pci 0000:00:0d.0: setting latency timer to 64
[ 1.659803] pci 0000:00:0f.0: setting latency timer to 64
[ 1.665399] bus: 00 index 0 io port: [0, ffff]
[ 1.670040] bus: 00 index 1 mmio: [0, ffffffffffffffff]
[ 1.675458] bus: 01 index 0 io port: [3000, 3fff]
[ 1.680356] bus: 01 index 1 mmio: [d0100000, d01fffff]
[ 1.685687] bus: 01 index 2 mmio: [d8000000, dfffffff]
[ 1.691027] bus: 01 index 3 io port: [0, ffff]
[ 1.695669] bus: 01 index 4 mmio: [0, ffffffffffffffff]
[ 1.701085] bus: 02 index 0 mmio: [0, 0]
[ 1.705201] bus: 02 index 1 mmio: [d0200000, d02fffff]
[ 1.710532] bus: 02 index 2 mmio: [d1000000, d10fffff]
[ 1.715862] bus: 02 index 3 mmio: [0, 0]
[ 1.719976] bus: 03 index 0 mmio: [0, 0]
[ 1.724093] bus: 03 index 1 mmio: [0, 0]
[ 1.728211] bus: 03 index 2 mmio: [0, 0]
[ 1.732327] bus: 03 index 3 mmio: [0, 0]
[ 1.736443] bus: 04 index 0 mmio: [0, 0]
[ 1.740562] bus: 04 index 1 mmio: [0, 0]
[ 1.744683] bus: 04 index 2 mmio: [0, 0]
[ 1.748801] bus: 04 index 3 mmio: [0, 0]
[ 1.752934] NET: Registered protocol family 2
[ 1.790275] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.800242] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.813278] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
[ 1.822932] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.829770] TCP reno registered
[ 1.840164] NET: Registered protocol family 1
[ 1.844853] checking if image is initramfs... it is
[ 1.946863] Freeing initrd memory: 1922k freed
[ 1.952558] Simple Boot Flag at 0x37 set to 0x80
[ 1.960282] audit: initializing netlink socket (disabled)
[ 1.965948] type=2000 audit(1221684197.964:1): initialized
[ 1.977176] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.987996] VFS: Disk quotas dquot_6.5.1
[ 1.992322] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.000631] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 2.007574] msgmni has been set to 15840
[ 2.011926] async_tx: api initialized (async)
[ 2.016496] io scheduler noop registered
[ 2.020626] io scheduler anticipatory registered
[ 2.025443] io scheduler deadline registered
[ 2.030096] io scheduler cfq registered (default)
[ 2.035040] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 2.242753] pci 0000:00:05.0: Enabling HT MSI Mapping
[ 2.248026] pci 0000:00:05.1: Enabling HT MSI Mapping
[ 2.253298] pci 0000:00:05.2: Enabling HT MSI Mapping
[ 2.258569] pci 0000:00:06.0: Enabling HT MSI Mapping
[ 2.263840] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 2.269115] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 2.274384] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 2.279654] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 2.284923] pci 0000:00:0f.0: Enabling HT MSI Mapping
[ 2.290198] pci 0000:01:04.0: Boot video device
[ 2.295130] pcieport-driver 0000:00:0a.0: setting latency timer to 64
[ 2.301796] pcieport-driver 0000:00:0a.0: found MSI capability
[ 2.307876] pci_express 0000:00:0a.0:pcie00: allocate port service
[ 2.314364] pci_express 0000:00:0a.0:pcie01: allocate port service
[ 2.320814] pci_express 0000:00:0a.0:pcie03: allocate port service
[ 2.327310] pcieport-driver 0000:00:0d.0: setting latency timer to 64
[ 2.333972] pcieport-driver 0000:00:0d.0: found MSI capability
[ 2.340033] pci_express 0000:00:0d.0:pcie00: allocate port service
[ 2.346478] pci_express 0000:00:0d.0:pcie01: allocate port service
[ 2.352928] pci_express 0000:00:0d.0:pcie03: allocate port service
[ 2.359412] pcieport-driver 0000:00:0f.0: setting latency timer to 64
[ 2.366074] pcieport-driver 0000:00:0f.0: found MSI capability
[ 2.372130] pci_express 0000:00:0f.0:pcie00: allocate port service
[ 2.378570] pci_express 0000:00:0f.0:pcie01: allocate port service
[ 2.385024] pci_express 0000:00:0f.0:pcie03: allocate port service
[ 2.393252] aer 0000:00:0a.0:pcie01: AER service couldn't init device: no _OSC support
[ 2.403151] aer 0000:00:0d.0:pcie01: AER service couldn't init device: no _OSC support
[ 2.413036] aer 0000:00:0f.0:pcie01: AER service couldn't init device: no _OSC support
[ 2.421764] input: Power Button (FF) as /class/input/input0
[ 2.427547] ACPI: Power Button (FF) [PWRF]
[ 2.431956] input: Power Button (CM) as /class/input/input1
[ 2.437730] ACPI: Power Button (CM) [PWRB]
[ 2.442465] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2.448539] processor ACPI0007:00: registered as cooling_device0
[ 2.454750] ACPI: Processor [C000] (supports 2 throttling states)
[ 2.461243] processor ACPI0007:01: registered as cooling_device1
[ 2.467553] processor ACPI0007:02: registered as cooling_device2
[ 2.473856] processor ACPI0007:03: registered as cooling_device3
[ 2.551196] hpet_resources: 0xfed00000 is busy
[ 2.556037] Non-volatile memory driver v1.2
[ 2.560567] Linux agpgart interface v0.103
[ 2.564963] Serial: 8250/16550 driver4 ports, IRQ sharing disabled
[ 2.571547] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.578525] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.584655] Floppy drive(s): fd0 is 1.44M
[ 5.600023] floppy0: no floppy controllers found
[ 5.607494] brd: module loaded
[ 5.611934] loop: module loaded
[ 5.615273] tun: Universal TUN/TAP device driver, 1.6
[ 5.620523] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 5.627097] console [netcon0] enabled
[ 5.630964] netconsole: network logging started
[ 5.635691] Uniform Multi-Platform E-IDE driver
[ 5.640554] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 5.650661] Probing IDE interface ide0...
[ 6.623534] hdb: CD-224E-N, ATAPI CD/DVD-ROM drive
[ 6.680121] Probing IDE interface ide1...
[ 7.220119] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 7.224942] ide1 at 0x170-0x177,0x376 on irq 15
[ 7.231765] hdb: ATAPI 24X CD-ROM drive, 256kB Cache
[ 7.237145] Uniform CD-ROM driver Revision: 3.20
[ 7.252071] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 7.259881] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 7.267154] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
[ 7.273348] Driver 'sd' needs updating - please use bus_type methods
[ 7.279972] Driver 'sr' needs updating - please use bus_type methods
[ 7.287151] sata_nv 0000:00:05.0: version 3.5
[ 7.291999] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23
[ 7.297948] IOAPIC[0]: Set routing entry (4-23 -> 0x61 -> IRQ 23 Mode:1 Active:1)
[ 7.305794] sata_nv 0000:00:05.0: PCI INT A -> Link[LTID] -> GSI 23 (level, low) -> IRQ 23
[ 7.314408] sata_nv 0000:00:05.0: Using SWNCQ mode
[ 7.319523] sata_nv 0000:00:05.0: setting latency timer to 64
[ 7.325654] scsi0 : sata_nv
[ 7.328840] scsi1 : sata_nv
[ 7.332023] ata1: SATA max UDMA/133 cmd 0x24d0 ctl 0x24c4 bmdma 0x2490 irq 23
[ 7.339356] ata2: SATA max UDMA/133 cmd 0x24c8 ctl 0x24c0 bmdma 0x2498 irq 23
[ 7.677046] ata1: SATA link down (SStatus 0 SControl 300)
[ 8.010394] ata2: SATA link down (SStatus 0 SControl 300)
[ 8.016279] ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 22
[ 8.022230] IOAPIC[0]: Set routing entry (4-22 -> 0x69 -> IRQ 22 Mode:1 Active:1)
[ 8.030072] sata_nv 0000:00:05.1: PCI INT B -> Link[LSI1] -> GSI 22 (level, low) -> IRQ 22
[ 8.038685] sata_nv 0000:00:05.1: Using SWNCQ mode
[ 8.043786] sata_nv 0000:00:05.1: setting latency timer to 64
[ 8.049864] scsi2 : sata_nv
[ 8.052998] scsi3 : sata_nv
[ 8.056180] ata3: SATA max UDMA/133 cmd 0x24e8 ctl 0x24dc bmdma 0x24a0 irq 22
[ 8.063516] ata4: SATA max UDMA/133 cmd 0x24e0 ctl 0x24d8 bmdma 0x24a8 irq 22
[ 8.400336] ata3: SATA link down (SStatus 0 SControl 300)
[ 8.733666] ata4: SATA link down (SStatus 0 SControl 300)
[ 8.739534] ACPI: PCI Interrupt Link [LSI2] enabled at IRQ 21
[ 8.745490] IOAPIC[0]: Set routing entry (4-21 -> 0x71 -> IRQ 21 Mode:1 Active:1)
[ 8.753340] sata_nv 0000:00:05.2: PCI INT C -> Link[LSI2] -> GSI 21 (level, low) -> IRQ 21
[ 8.761952] sata_nv 0000:00:05.2: Using SWNCQ mode
[ 8.767051] sata_nv 0000:00:05.2: setting latency timer to 64
[ 8.773139] scsi4 : sata_nv
[ 8.776273] scsi5 : sata_nv
[ 8.779449] ata5: SATA max UDMA/133 cmd 0x2800 ctl 0x24f4 bmdma 0x24b0 irq 21
[ 8.786784] ata6: SATA max UDMA/133 cmd 0x24f8 ctl 0x24f0 bmdma 0x24b8 irq 21
[ 9.123711] ata5: SATA link down (SStatus 0 SControl 300)
[ 9.457043] ata6: SATA link down (SStatus 0 SControl 300)
[ 9.462786] pata_amd 0000:00:04.0: version 0.3.10
[ 9.467719] pata_amd 0000:00:04.0: BAR 0: can't reserve I/O region [0x1f0-0x1f7]
[ 9.475461] pata_amd 0000:00:04.0: failed to request/iomap BARs for port 0 (errno=-16)
[ 9.483729] pata_amd 0000:00:04.0: BAR 2: can't reserve I/O region [0x170-0x177]
[ 9.491476] pata_amd 0000:00:04.0: failed to request/iomap BARs for port 1 (errno=-16)
[ 9.499744] pata_amd 0000:00:04.0: no available native port
[ 9.505848] Fusion MPT base driver 3.04.07
[ 9.510141] Copyright (c) 1999-2008 LSI Corporation
[ 9.515225] Fusion MPT SPI Host driver 3.04.07
[ 9.519953] Fusion MPT SAS Host driver 3.04.07
[ 9.525373] ieee1394: raw1394: /dev/raw1394 device initialized
[ 9.531907] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20
[ 9.537855] IOAPIC[0]: Set routing entry (4-20 -> 0x79 -> IRQ 20 Mode:1 Active:1)
[ 9.545699] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 20 (level, low) -> IRQ 20
[ 9.554409] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 9.560437] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 9.566111] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 9.578754] ehci_hcd 0000:00:02.1: debug port 1
[ 9.583480] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 9.590474] ehci_hcd 0000:00:02.1: irq 20, io mem 0xd0041000
[ 9.603347] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 9.611332] usb usb1: configuration #1 chosen from 1 choice
[ 9.617202] hub 1-0:1.0: USB hub found
[ 9.621170] hub 1-0:1.0: 10 ports detected
[ 9.727087] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 9.735198] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 19
[ 9.741141] IOAPIC[0]: Set routing entry (4-19 -> 0x81 -> IRQ 19 Mode:1 Active:1)
[ 9.748986] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 19 (level, low) -> IRQ 19
[ 9.757691] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 9.763725] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 9.769310] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 9.777074] ohci_hcd 0000:00:02.0: irq 19, io mem 0xd0040000
[ 9.835493] usb usb2: configuration #1 chosen from 1 choice
[ 9.841355] hub 2-0:1.0: USB hub found
[ 9.845307] hub 2-0:1.0: 10 ports detected
[ 9.950334] USB Universal Host Controller Interface driver v3.0
[ 9.956623] usbcore: registered new interface driver usblp
[ 9.962303] Initializing USB Mass Storage driver...
[ 9.967449] usbcore: registered new interface driver usb-storage
[ 9.973658] USB Mass Storage support registered.
[ 9.978631] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 10.236985] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 10.242370] mice: PS/2 mouse device common for all mice
[ 10.353338] md: linear personality registered for level -1
[ 10.447540] md: raid0 personality registered for level 0
[ 10.453050] md: raid1 personality registered for level 1
[ 10.458553] md: raid10 personality registered for level 10
[ 10.520442] raid6: int64x1 2568 MB/s
[ 10.580428] raid6: int64x2 3277 MB/s
[ 10.640437] raid6: int64x4 3227 MB/s
[ 10.700434] raid6: int64x8 2278 MB/s
[ 10.760424] raid6: sse2x1 3921 MB/s
[ 10.820421] raid6: sse2x2 5110 MB/s
[ 10.880420] raid6: sse2x4 5274 MB/s
[ 10.884370] raid6: using algorithm sse2x4 (5274 MB/s)
[ 10.889617] md: raid6 personality registered for level 6
[ 10.895129] md: raid5 personality registered for level 5
[ 10.900642] md: raid4 personality registered for level 4
[ 10.906153] md: multipath personality registered for level -4
[ 10.912349] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
[ 10.921284] cpuidle: using governor ladder
[ 10.925801] cpuidle: using governor menu
[ 10.930007] usbcore: registered new interface driver usbhid
[ 10.935775] usbhid: v2.6:USB HID core driver
[ 10.940354] oprofile: using NMI interrupt.
[ 10.945133] TCP cubic registered
[ 10.948765] NET: Registered protocol family 10
[ 10.954418] IPv6 over IPv4 tunneling driver
[ 10.959568] NET: Registered protocol family 17
[ 10.964611] RPC: Registered udp transport module.
[ 10.969516] RPC: Registered tcp transport module.
[ 10.974504] powernow-k8: Found 2 Dual-Core AMD Opteron(tm) Processor 2220 processors (4 cpu cores) (version 2.20.00)
[ 10.980007] powernow-k8: 0 : fid 0x14 (2800 MHz), vid 0x8
[ 10.991352] powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0xa
[ 10.997210] powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xc
[ 11.003068] powernow-k8: 3 : fid 0xe (2200 MHz), vid 0xe
[ 11.008840] powernow-k8: 4 : fid 0xc (2000 MHz), vid 0x10
[ 11.014696] powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x10
[ 11.020559] powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12
[ 10.980842] powernow-k8: 0 : fid 0x14 (2800 MHz), vid 0x8
[ 11.032498] powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0xa
[ 11.038362] powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xc
[ 11.044220] powernow-k8: 3 : fid 0xe (2200 MHz), vid 0xe
[ 11.049992] powernow-k8: 4 : fid 0xc (2000 MHz), vid 0x10
[ 11.055850] powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x10
[ 11.061710] powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12
[ 11.068400] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 11.074956] Freeing unused kernel memory: 676k freed
[ 11.080499] Write protecting the kernel read-only data: 5672k
[ 11.500848] Clocksource tsc unstable (delta = -74982452 ns)
[ 11.622045] ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 18
[ 11.622054] IOAPIC[0]: Set routing entry (4-18 -> 0x89 -> IRQ 18 Mode:1 Active:1)
[ 11.622117] arcmsr 0000:02:00.0: PCI INT A -> Link[LK3E] -> GSI 18 (level, low) -> IRQ 18
[ 11.622124] arcmsr 0000:02:00.0: setting latency timer to 64
[ 11.633781] ARECA RAID ADAPTER6: FIRMWARE VERSION V1.44 2008-1-31
[ 11.647101] scsi6 : Areca SATA Host Adapter RAID Controller( RAID6 capable)
[ 11.647103] Driver Version 1.20.00.15 2008/02/27
[ 11.648067] scsi 6:0:0:0: Direct-Access Areca ARC-1280-VOL#00 R001 PQ: 0 ANSI: 5
[ 11.649251] sd 6:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
[ 11.649299] sd 6:0:0:0: [sda] 21484367872 512-byte hardware sectors (10999996 MB)
[ 11.649347] sd 6:0:0:0: [sda] Write Protect is off
[ 11.649350] sd 6:0:0:0: [sda] Mode Sense: cb 00 00 08
[ 11.649433] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 11.649633] sd 6:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
[ 11.649678] sd 6:0:0:0: [sda] 21484367872 512-byte hardware sectors (10999996 MB)
[ 11.649720] sd 6:0:0:0: [sda] Write Protect is off
[ 11.649723] sd 6:0:0:0: [sda] Mode Sense: cb 00 00 08
[ 11.649805] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 11.649809] sda: sda1 sda2 sda3 sda4
[ 11.681499] sd 6:0:0:0: [sda] Attached SCSI disk
[ 11.682282] sd 6:0:0:0: Attached scsi generic sg0 type 0
[ 11.683553] scsi 6:0:16:0: Processor Areca RAID controller R001 PQ: 0 ANSI: 0
[ 11.684441] scsi 6:0:16:0: Attached scsi generic sg1 type 3
[ 11.859757] 3ware Storage Controller device driver for Linux v1.26.02.002.
[ 11.891003] 3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
[ 11.956151] Adaptec aacraid driver 1.1-5[2456]-ms
[ 12.396745] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[ 12.404532] SGI XFS Quota Management subsystem
[ 12.457945] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
[ 12.457954] Copyright (c) 1999-2006 Intel Corporation.