[git pull] x86 updates for v2.6.28, phase #9, sparse IRQ support
From: Ingo Molnar
Date: Thu Oct 09 2008 - 20:17:54 EST
Linus,
Please pull the latest x86-v28-for-linus-phase9 git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git x86-v28-for-linus-phase9
Sparse IRQ support - make NR_IRQS dynamic by turning it into nr_irqs, an
by creating irq descriptors in a sparse way.
Includes a number of dependent x86 topics: timers/hpet-percpu, IO-APIC
and local APIC code unification, UV support updates.
Has been cross-built on all architectures we could get crosscompilers
for:
http://www.tglx.de/autoqa/index
It should be largely uneventful for sparse-irq unaware, non-x86
architectures.
out-of-topic modifications in x86-v28-for-linus-phase9:
-------------------------------------------------------
arch/Kconfig # f9fd45f: x86: make HAVE_SPARSE_IRQ support
# f2f61d1: generic: sparse irqs: use irq_des
# f4e4080: x86: enable dyn_array support
arch/ia64/kernel/acpi.c # eada62c: acpi/x86: introduce __apci_map_ta
arch/m68k/kernel/ints.c # 3af7043: sparseirq: export nr_irqs on m68k
# 9e89c54: irq: introduce nr_irqs
arch/s390/kernel/irq.c # 3af7043: sparseirq: export nr_irqs on m68k
# 9e89c54: irq: introduce nr_irqs
arch/sparc/kernel/irq.c # 3af7043: sparseirq: export nr_irqs on m68k
# 9e89c54: irq: introduce nr_irqs
drivers/acpi/osl.c # eada62c: acpi/x86: introduce __apci_map_ta
drivers/acpi/tables.c # eada62c: acpi/x86: introduce __apci_map_ta
drivers/acpi/tables/tbxface.c # eada62c: acpi/x86: introduce __apci_map_ta
drivers/char/hpet.c # efe5f1f: drivers/char: use nr_irqs
drivers/char/random.c # 0f8348b: x86: put timer_rand_state pointer
# 7d95b2f: irqs: make irq_timer_state to use
# efe5f1f: drivers/char: use nr_irqs
drivers/char/vr41xx_giu.c # efe5f1f: drivers/char: use nr_irqs
drivers/gpio/gpiolib.c # f2f61d1: generic: sparse irqs: use irq_des
drivers/mfd/asic3.c # f2f61d1: generic: sparse irqs: use irq_des
drivers/mfd/htc-egpio.c # f2f61d1: generic: sparse irqs: use irq_des
drivers/net/3c59x.c # 11eb183: drivers/net: use nr_irqs
drivers/net/hamradio/baycom_ser_fdx.c# 11eb183: drivers/net: use nr_irqs
drivers/net/hamradio/scc.c # 11eb183: drivers/net: use nr_irqs
drivers/net/wan/sbni.c # 11eb183: drivers/net: use nr_irqs
drivers/parisc/dino.c # f2f61d1: generic: sparse irqs: use irq_des
drivers/parisc/eisa.c # f2f61d1: generic: sparse irqs: use irq_des
drivers/parisc/gsc.c # f2f61d1: generic: sparse irqs: use irq_des
drivers/parisc/iosapic.c # f2f61d1: generic: sparse irqs: use irq_des
drivers/parisc/superio.c # f2f61d1: generic: sparse irqs: use irq_des
drivers/pci/dmar.c # 6a6ea11: x86/pci: fix dmar_tbl early_iorem
# 0f48966: dmar: fix dmar_parse_dev() device
# 2283240: dmar: use list_for_each_entry_saf
# 3f1fdb3: dmar: initialize the return value
# f12c73e: dmar: fix using early fixmap mapp
drivers/pci/htirq.c # fac1ddf: irq: error missed ifndef CONFIG_H
# daa86c2: irq: error missed ifndef CONFIG_H
# 393b543: x86: use 28 bits irq NR for pci m
drivers/pci/intr_remapping.c # 52f0dd2: sparseirq: fix intr-remap with dy
# 0cd4568: x86: put irq_2_iommu pointer into
# 7dd5896: irq: make irq2_iommu to use dyn_a
# 09baa17: drivers/pci/ intr remapping: use
drivers/pcmcia/at91_cf.c # 32d730e: drivers/pcmcia: use nr_irqs
drivers/pcmcia/hd64465_ss.c # f2f61d1: generic: sparse irqs: use irq_des
drivers/pcmcia/vrc4171_card.c # 32d730e: drivers/pcmcia: use nr_irqs
drivers/rtc/rtc-vr41xx.c # 437dff2: drivers/rtc: use nr_irqs
drivers/scsi/aha152x.c # 400163a: drivers/scsi: use nr_irqs
drivers/scsi/qla2xxx/qla_def.h # 9e40236: pci: change msi-x vector to 32bit
drivers/serial/68328serial.c # d1c1152: serial, 8250: remove NR_IRQ usage
drivers/serial/8250.c # 06d4e48: drivers/serial: use nr_irqs
# d1c1152: serial, 8250: remove NR_IRQ usage
drivers/serial/amba-pl010.c # 06d4e48: drivers/serial: use nr_irqs
drivers/serial/amba-pl011.c # 06d4e48: drivers/serial: use nr_irqs
drivers/serial/cpm_uart/cpm_uart_core.c# 06d4e48: drivers/serial: use nr_irqs
drivers/serial/m32r_sio.c # 06d4e48: drivers/serial: use nr_irqs
drivers/serial/serial_core.c # 06d4e48: drivers/serial: use nr_irqs
drivers/serial/serial_lh7a40x.c # 06d4e48: drivers/serial: use nr_irqs
drivers/serial/sh-sci.c # 06d4e48: drivers/serial: use nr_irqs
drivers/serial/ucc_uart.c # 06d4e48: drivers/serial: use nr_irqs
fs/proc/proc_misc.c # 393b543: x86: use 28 bits irq NR for pci m
# 9ac68c3: x86_64: make /proc/interrupts wor
# 40643ff: irq, fs/proc: replace loop with n
# fb6dc57: x86: move kstat_irqs from kstat t
# eb2befe: fs/proc: use nr_irqs
include/acpi/acpiosxf.h # eada62c: acpi/x86: introduce __apci_map_ta
include/acpi/acpixf.h # eada62c: acpi/x86: introduce __apci_map_ta
include/asm-generic/vmlinux.lds.h # 28c00bc: add per_cpu_dyn_array support
# 565a0e8: generic: add dyn_array support
include/linux/acpi.h # eada62c: acpi/x86: introduce __apci_map_ta
include/linux/dmar.h # f12c73e: dmar: fix using early fixmap mapp
include/linux/init.h # dac5f10: x86: alloc dyn_array all together
# 28c00bc: add per_cpu_dyn_array support
# 565a0e8: generic: add dyn_array support
include/linux/interrupt.h # 40643ff: irq, fs/proc: replace loop with n
# 9e89c54: irq: introduce nr_irqs
include/linux/irq.h # 310e8db: sparseirq: move kstat_irqs from k
# b07e51e: x86: remove irqbalance in kernel
# 393b543: x86: use 28 bits irq NR for pci m
# 0cd4568: x86: put irq_2_iommu pointer into
# 93dce19: irq: separate sparse_irqs from sp
# 847f106: x86_64: rename irq_desc/irq_desc_
# 8d1d05e: generic: add irq_desc in function
# 7329b0c: irq: replace loop with nr_irqs wi
# 7ef7c43: irq: add irq_desc_without_new
# fb6dc57: x86: move kstat_irqs from kstat t
# 0f8348b: x86: put timer_rand_state pointer
# f2f61d1: generic: sparse irqs: use irq_des
# 78c82c3: irq: make irq_desc to use dyn_arr
# 8d00a6c: genirq: remove last NO_IDLE_HZ le
include/linux/kernel_stat.h # 310e8db: sparseirq: move kstat_irqs from k
# fb6dc57: x86: move kstat_irqs from kstat t
# f909491: irq: make irqs in kernel stat use
include/linux/pci.h # 9e40236: pci: change msi-x vector to 32bit
init/Makefile # 35aa85d: dyn_array: split dyn_array functi
init/dyn_array.c # a7616e5: dyn_array: use %pF instead of pri
# 0bfd4d1: dyn_array: remove one panic
# 00be105: dyn_array: fix typo
# 28de6b7: dyn_array: don't break compiling
# 35aa85d: dyn_array: split dyn_array functi
kernel/irq/autoprobe.c # ff2973b: irq: sparse irqs, fix IRQ auto-pr
# f2f61d1: generic: sparse irqs: use irq_des
# 9e89c54: irq: introduce nr_irqs
kernel/irq/chip.c # dcec2cc: irq: set_irq_chip() has redundant
# 310e8db: sparseirq: move kstat_irqs from k
# 847f106: x86_64: rename irq_desc/irq_desc_
# 1928d43: irq: remove >= nr_irqs checking w
# fb6dc57: x86: move kstat_irqs from kstat t
# f2f61d1: generic: sparse irqs: use irq_des
# 9e89c54: irq: introduce nr_irqs
kernel/irq/handle.c # bcb7176: x86: fix typo in irq_desc array
# 14a929b: fix warning: "x86: sparse_irq nee
# 2806dc4: sparseirq: remove some debug prin
# 310e8db: sparseirq: move kstat_irqs from k
# a532e19: x86: sparse_irq needs spin_lock i
# 95e9fdf: sparseirq: fix lockdep
# 93dce19: irq: separate sparse_irqs from sp
# 847f106: x86_64: rename irq_desc/irq_desc_
# 8d1d05e: generic: add irq_desc in function
# 7ef7c43: irq: add irq_desc_without_new
# fb6dc57: x86: move kstat_irqs from kstat t
# f2f61d1: generic: sparse irqs: use irq_des
# 414ec26: irq: sparse irqs, export nr_irqs
# 78c82c3: irq: make irq_desc to use dyn_arr
# 9e89c54: irq: introduce nr_irqs
# 8d00a6c: genirq: remove last NO_IDLE_HZ le
kernel/irq/internals.h # 7329b0c: irq: replace loop with nr_irqs wi
kernel/irq/manage.c # eefc5bb: x86: HPET_MSI change IRQ affinity
# b07e51e: x86: remove irqbalance in kernel
# 847f106: x86_64: rename irq_desc/irq_desc_
# 1928d43: irq: remove >= nr_irqs checking w
# 7329b0c: irq: replace loop with nr_irqs wi
# f2f61d1: generic: sparse irqs: use irq_des
# 9e89c54: irq: introduce nr_irqs
kernel/irq/migration.c # f2f61d1: generic: sparse irqs: use irq_des
kernel/irq/proc.c # 7329b0c: irq: replace loop with nr_irqs wi
# f2f61d1: generic: sparse irqs: use irq_des
# 9e89c54: irq: introduce nr_irqs
kernel/irq/resend.c # f2f61d1: generic: sparse irqs: use irq_des
# 9e89c54: irq: introduce nr_irqs
kernel/irq/spurious.c # bbd243a: irq: fix irqpoll && sparseirq
# f2f61d1: generic: sparse irqs: use irq_des
# 9e89c54: irq: introduce nr_irqs
# f84dbb9: genirq: enable polling for disabl
Thanks,
Ingo
------------------>
Alan Cox (1):
serial, 8250: remove NR_IRQ usage
Alex Nixon (2):
xen: fix memory access violation bug when CONFIG_HAVE_SPARSE_IRQ is enabled
xen: Fix bug `do_IRQ: cannot handle IRQ -1 vector 0x6 cpu 1'
Alok Kataria (1):
x86: VMI, initialize IRQ vector
Andrew Morton (1):
fix warning: "x86: sparse_irq needs spin_lock in allocations"
Cyrill Gorcunov (19):
x86: apic_64.c - setup_APIC_timer has to be __cpuinit function
x86: apic - introduce get_physical_broadcast for 64bit
x86: apic - unify setup_apicpmtimer
x86: apic_64.c - add sanity check for spurious vector definition
x86: apic - unify setup_local_APIC
x86: apic_32.c should use __cpuinit section
x86: apic - unify smp_apic_timer_interrupt
x86: apic - unify smp_spurious/error_interrupt declaration
x86: io-apic - use ARRAY_SIZE macro
x86: io-apic - declare irq_cfg_lock for SPARSE_IRQ only
x86: io-apic - code style cleaning for setup_IO_APIC_irqs
x86: io-apic - do not use KERN_DEBUG marker too much
x86: io-apic - get rid of __DO_ACTION macro
x86: apic - lapic_setup_esr does not handle esr_disable - fix it
x86: apic - skip writting ESR register if we dont have on
x86: apic - fix unused vars warning in calibrate_APIC_clock
x86: io-apic - do not use KERN_DEBUG marker too much, fix
x86: io-apic - interrupt remapping fix
x86: io-apic - interrupt remapping fix
Dean Nelson (3):
irq: error missed ifndef CONFIG_HAVE_SPARSE_IRQ
irq: set_irq_chip() has redundant call to irq_to_desc()
x86, UV: add uv_setup_irq() and uv_teardown_irq() functions, v3
Eric W. Biederman (1):
genirq: enable polling for disabled screaming irqs
H. Peter Anvin (1):
dyn_array: don't break compiling for !CONFIG_SMP
Ingo Molnar (10):
irq: sparse irqs, export nr_irqs
irq: sparse irqs, fix #3
irq: sparse irqs, fix IRQ auto-probe crash
sparseirq: fix lockdep
x86: make io_apic_32.c the same as io_apic_64.c
warning: fix arch x86 kernel io_apic c
sparseirq: export nr_irqs on m68k/sparc/s390
x86: HPET_MSI Basic HPET_MSI setup code, cleanups
x86, UV: add uv_setup_irq() and uv_teardown_irq() functions, v3, fix
Revert "pci: fix BAR print out"
Jack Steiner (3):
x86, uv: fix ordering of calls to uv_system_init & uv_cpu_init
x86, uv: add early detection of UV system types
x86, uv: fix for size of hub mappings
Russ Anderson (5):
sysfs, x86, uv: Document files in /sys/firmware/sgi_uv/
x86: Add UV EFI table entry v4
x86: Add UV bios call infrastructure v4
x86: Add UV partition call v4
x86: Add sysfs entries for UV v4
Steven Noonan (1):
x86: fix HPET compiler error when not using CONFIG_PCI_MSI
Suresh Siddha (3):
sparseirq: fix intr-remap with dyn_array/nr_irqs changes]
dmar: use list_for_each_entry_safe() in dmar_dev_scope_init()
dmar: fix dmar_parse_dev() devices_cnt error condition check
Thomas Gleixner (1):
genirq: remove last NO_IDLE_HZ leftovers
Venki Pallipadi (2):
x86: using HPET in MSI mode and setting up per CPU HPET timers, fix
hpet: clean up warning
Yinghai Lu (102):
x86: add after_bootmem flag for 32bit
x86: remove irq_vectors_limits
generic: add dyn_array support
add per_cpu_dyn_array support
x86: alloc dyn_array all together
x86: enable dyn_array support
irq: introduce nr_irqs
x86: use nr_irqs
drivers/char: use nr_irqs
drivers/net: use nr_irqs
drivers/pci/ intr remapping: use nr_irqs
drivers/pcmcia: use nr_irqs
drivers/rtc: use nr_irqs
drivers/scsi: use nr_irqs
drivers/serial: use nr_irqs
fs/proc: use nr_irqs
drivers/xen: use nr_irqs
irqs: make irq_timer_state to use dyn_array
irq: make irq2_iommu to use dyn_array
irq: make irq_desc to use dyn_array
irq: make irqs in kernel stat use per_cpu_dyn_array
x86: use dyn_array in io_apic_xx.c
x86, irq: get nr_irqs from madt
x86: remove nr_irq_vectors
generic: sparse irqs: use irq_desc() together with dyn_array, instead of irq_desc[]
x86: add irq_cfg in io_apic_64.c
x86: put irq_2_pin pointer into irq_cfg
x86: put timer_rand_state pointer into irq_desc
x86: move kstat_irqs from kstat to irq_desc
irq: add irq_desc_without_new
irq: replace loop with nr_irqs with for_each_irq_desc
irq, fs/proc: replace loop with nr_irqs for proc/stat
x86, ioapic: replace loop with nr_irqs with for_each_irq_icfg
irq: remove >= nr_irqs checking with config_have_sparse_irq
generic: add irq_desc in function in parameter
x86: check with without_new in show_interrupts
x86_64: rename irq_desc/irq_desc_alloc
irq: separate sparse_irqs from sparse_irqs_free
x86_64: separate irq_cfgx from irq_cfgx_free
x86_64: make /proc/interrupts work with dyn irq_desc
x86: put irq_2_iommu pointer into irq_desc
x86: use 28 bits irq NR for pci msi/msix and ht
x86: remove irqbalance in kernel for 32 bit
x86: add irq_cfg for 32bit
x86: make 32bit use irq_cfg_alloc, etc
x86: make 32bit to use irq_2_pin in irq_cfg
x86: make 32 bit to use sparse_irq
x86: make 32bit support per_cpu vector
x86: add debug info for 32bit sparse_irq
x86, io-apic: remove union about dest for log/phy
x86: ordering functions in io_apic_32.c
x86: ordering functions in io_apic_64.c
x86: order variables in io_apic_xx.c
x86: make headers files the same in io_apic_xx.c
x86: make 64 handle sis_apic_bug like the 32 bit
x86: remove ioapic_force
x86: make io_apic_64.c and io_apic_32.c the same
rename io_apic_64.c and io_apic_32.c to io_apic.c
io_apic: make 32 bit have io_apic resource in /proc/iomem
pci: change msi-x vector to 32bit
x86: irq: interrupt array size should be NR_VECTORS
x86: unify mask_IO_APIC_irq
x86: unify ack_apic_edge
x86: remove first_free_entry/pin_map_size
x86: print local APIC of APs one by one
x86: make HAVE_SPARSE_IRQ support selectable
x86: probe nr_irqs even only mptable is used
dyn_array: split dyn_array functions from init/main.c
x86: sparse_irq needs spin_lock in allocations
x86: fix 32-bit ioapic lockup with sparseirqs
x86: fix probe_nr_irqs for xen
x86: apic_xx.c order variables
x86: use HAVE_X2APIC in apic_64.c
x86: add hard_smp_prossor_id with MACRO in io_apic_xx.c
x86: make apic_32/64.c more like
x86: merge APIC_init_uniprocessor
x86: copy detect_init_APIC to the other
x86: merge header files in apic_xx.c
x86: apic unify smp_spurious/error_interrupt
x86: apic copy calibrate_APIC_clock to each other in apic_32/64.c
x86: apic copy apic_64.c to apic_32.c
x86: rename apic_32.c and apic_64.c to apic.c
x86: let 64 bit to use 32 bit calibrate_apic_clock
sparseirq: move kstat_irqs from kstat to irq_desc - fix
x2apic: fix reserved APIC register accesses in print_local_APIC()
dmar: fix using early fixmap mapping for DMAR table parsing
dmar: initialize the return value in dmar_parse_dev()
x86: print out if acpi want physical flat of all
dyn_array: fix typo
pci: fix BAR print out
irq: error missed ifndef CONFIG_HAVE_SPARSE_IRQ, v2
dyn_array: remove one panic
x86: lapic address print out like io apic addr
x86: print out apic id in hex format
dyn_array: use %pF instead of print_fn_descriptor_symbol
irq: fix irqpoll && sparseirq
sparseirq: remove some debug print out
x86/pci: fix dmar_tbl early_ioremap leak v2
x86: fix typo in irq_desc array
x86: irq no should not use hex in /proc/interrupts
x86: print out irq nr for msi/ht, v3
acpi/x86: introduce __apci_map_table, v4
venkatesh.pallipadi@xxxxxxxxx (4):
x86: HPET_MSI change IRQ affinity in process context when it is disabled
x86: HPET_MSI Refactor code in preparation for HPET_MSI
x86: HPET_MSI Basic HPET_MSI setup code
x86: HPET_MSI Initialise per-cpu HPET timers
arch/Kconfig | 3 +
arch/ia64/kernel/acpi.c | 4 +
arch/m68k/kernel/ints.c | 3 +
arch/s390/kernel/irq.c | 3 +
arch/sparc/kernel/irq.c | 4 +
arch/x86/Kconfig | 20 +-
arch/x86/configs/i386_defconfig | 1 -
arch/x86/kernel/Makefile | 6 +-
arch/x86/kernel/acpi/boot.c | 20 +-
arch/x86/kernel/{apic_32.c => apic.c} | 619 ++++-
arch/x86/kernel/apic_64.c | 1848 -------------
arch/x86/kernel/bios_uv.c | 137 +-
arch/x86/kernel/cpu/amd.c | 2 +-
arch/x86/kernel/cpu/intel.c | 2 +-
arch/x86/kernel/early-quirks.c | 4 +-
arch/x86/kernel/efi.c | 4 +
arch/x86/kernel/entry_32.S | 2 +-
arch/x86/kernel/genapic_flat_64.c | 4 +-
arch/x86/kernel/genx2apic_uv_x.c | 62 +-
arch/x86/kernel/hpet.c | 453 +++-
arch/x86/kernel/{io_apic_64.c => io_apic.c} | 1689 ++++++++++---
arch/x86/kernel/io_apic_32.c | 2908 ---------------------
arch/x86/kernel/irq_32.c | 71 +-
arch/x86/kernel/irq_64.c | 74 +-
arch/x86/kernel/irqinit_32.c | 48 +-
arch/x86/kernel/irqinit_64.c | 28 +-
arch/x86/kernel/quirks.c | 3 -
arch/x86/kernel/setup.c | 6 +
arch/x86/kernel/setup_percpu.c | 19 +-
arch/x86/kernel/smpboot.c | 6 +-
arch/x86/kernel/uv_irq.c | 79 +
arch/x86/kernel/uv_sysfs.c | 72 +
arch/x86/kernel/visws_quirks.c | 32 +-
arch/x86/kernel/vmiclock_32.c | 3 +
arch/x86/kernel/vmlinux_32.lds.S | 1 +
arch/x86/kernel/vmlinux_64.lds.S | 3 +
arch/x86/lguest/boot.c | 2 +-
arch/x86/mach-generic/bigsmp.c | 4 +
arch/x86/mach-generic/es7000.c | 14 +
arch/x86/mach-generic/numaq.c | 14 +
arch/x86/mach-generic/summit.c | 14 +
arch/x86/mach-voyager/voyager_smp.c | 4 +-
arch/x86/mm/init_32.c | 3 +
arch/x86/mm/srat_64.c | 2 +-
arch/x86/xen/irq.c | 2 -
arch/x86/xen/spinlock.c | 2 +-
drivers/acpi/osl.c | 11 +-
drivers/acpi/tables.c | 20 +-
drivers/acpi/tables/tbxface.c | 17 +-
drivers/char/hpet.c | 2 +-
drivers/char/random.c | 72 +-
drivers/char/vr41xx_giu.c | 2 +-
drivers/gpio/gpiolib.c | 2 +-
drivers/mfd/asic3.c | 4 +-
drivers/mfd/htc-egpio.c | 2 +-
drivers/net/3c59x.c | 4 +-
drivers/net/hamradio/baycom_ser_fdx.c | 4 +-
drivers/net/hamradio/scc.c | 6 +-
drivers/net/wan/sbni.c | 2 +-
drivers/parisc/dino.c | 6 +-
drivers/parisc/eisa.c | 4 +-
drivers/parisc/gsc.c | 12 +-
drivers/parisc/iosapic.c | 4 +-
drivers/parisc/superio.c | 4 +-
drivers/pci/dmar.c | 66 +-
drivers/pci/htirq.c | 20 +-
drivers/pci/intr_remapping.c | 221 ++-
drivers/pcmcia/at91_cf.c | 2 +-
drivers/pcmcia/hd64465_ss.c | 12 +-
drivers/pcmcia/vrc4171_card.c | 2 +-
drivers/rtc/rtc-vr41xx.c | 4 +-
drivers/scsi/aha152x.c | 2 +-
drivers/scsi/qla2xxx/qla_def.h | 2 +-
drivers/serial/68328serial.c | 11 +-
drivers/serial/8250.c | 69 +-
drivers/serial/amba-pl010.c | 2 +-
drivers/serial/amba-pl011.c | 2 +-
drivers/serial/cpm_uart/cpm_uart_core.c | 2 +-
drivers/serial/m32r_sio.c | 4 +-
drivers/serial/serial_core.c | 2 +-
drivers/serial/serial_lh7a40x.c | 2 +-
drivers/serial/sh-sci.c | 2 +-
drivers/serial/ucc_uart.c | 2 +-
drivers/xen/events.c | 20 +-
fs/proc/proc_misc.c | 72 +-
include/acpi/acpiosxf.h | 1 +
include/acpi/acpixf.h | 4 +
include/asm-generic/vmlinux.lds.h | 13 +
include/asm-x86/apic.h | 16 +-
include/asm-x86/bigsmp/apic.h | 15 +-
include/asm-x86/efi.h | 13 +
include/asm-x86/es7000/apic.h | 3 +-
include/asm-x86/genapic_32.h | 2 +
include/asm-x86/hpet.h | 21 +
include/asm-x86/hw_irq.h | 13 +-
include/asm-x86/io_apic.h | 24 +-
include/asm-x86/irq_vectors.h | 24 +-
include/asm-x86/mach-default/entry_arch.h | 1 +
include/asm-x86/mach-default/mach_apic.h | 15 +-
include/asm-x86/mach-generic/irq_vectors_limits.h | 14 -
include/asm-x86/mach-generic/mach_apic.h | 1 +
include/asm-x86/numaq/apic.h | 2 -
include/asm-x86/summit/apic.h | 1 -
include/asm-x86/summit/irq_vectors_limits.h | 14 -
include/asm-x86/uv/bios.h | 94 +-
include/asm-x86/uv/uv_irq.h | 36 +
include/linux/acpi.h | 1 +
include/linux/dmar.h | 1 -
include/linux/efi.h | 4 +
include/linux/init.h | 44 +
include/linux/interrupt.h | 7 +
include/linux/irq.h | 89 +-
include/linux/kernel_stat.h | 26 +-
include/linux/pci.h | 2 +-
init/Makefile | 2 +-
init/dyn_array.c | 120 +
init/main.c | 11 +-
kernel/irq/autoprobe.c | 30 +-
kernel/irq/chip.c | 99 +-
kernel/irq/handle.c | 253 ++-
kernel/irq/internals.h | 4 +-
kernel/irq/manage.c | 68 +-
kernel/irq/migration.c | 14 +-
kernel/irq/proc.c | 44 +-
kernel/irq/resend.c | 6 +-
kernel/irq/spurious.c | 154 +-
126 files changed, 4423 insertions(+), 5886 deletions(-)
rename arch/x86/kernel/{apic_32.c => apic.c} (79%)
delete mode 100644 arch/x86/kernel/apic_64.c
rename arch/x86/kernel/{io_apic_64.c => io_apic.c} (65%)
delete mode 100644 arch/x86/kernel/io_apic_32.c
create mode 100644 arch/x86/kernel/uv_irq.c
create mode 100644 arch/x86/kernel/uv_sysfs.c
delete mode 100644 include/asm-x86/mach-generic/irq_vectors_limits.h
delete mode 100644 include/asm-x86/summit/irq_vectors_limits.h
create mode 100644 include/asm-x86/uv/uv_irq.h
create mode 100644 init/dyn_array.c
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/