Re: [PATCH] Enable console on PCI serial devices

[n0ano]

On Tue, Oct 21, 2008 at 04:08:03PM -0600, Bjorn Helgaas wrote:
>... 
> Down to nits now :-)  That last sentence would be clearer to me if it
> said '(typically "base" is the fastest baud rate supported by the UART).'
> I capitalized UART to match the one earlier.

NP, consistency is a good thing.

Signed-off-by: Don Dugger <donald.d.dugger@xxxxxxxxx>

-- 
Don Dugger
"Censeo Toto nos in Kansa esse decisse." - D. Gale
n0ano@xxxxxxxxx
Ph: 303/443-3786

 Documentation/kernel-parameters.txt |   14 +++++++++-----
 drivers/serial/8250_early.c         |    5 +++++
 2 files changed, 14 insertions(+), 5 deletions(-)

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 82c561f..f07e77c 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -505,12 +505,16 @@ and is between 256 and 4096 characters. It is defined in the file
 			Documentation/networking/netconsole.txt for an
 			alternative.
 
-		uart[8250],io,<addr>[,options]
-		uart[8250],mmio,<addr>[,options]
+		uart[8250],io,<addr>[,options[,base]]
+		uart[8250],mmio,<addr>[,options[,base]]
 			Start an early, polled-mode console on the 8250/16550
 			UART at the specified I/O port or MMIO address,
 			switching to the matching ttyS device later.  The
-			options are the same as for ttyS, above.
+			"options" are the same as for ttyS, above.  "base"
+			is base baud, defaults to 115200, which is used to
+			calculate the divisor for the crystal frequency
+			(typically "base" is the fastest baud rate supported
+			by the UART).
 
                 If the device connected to the port is not a TTY but a braille
                 device, prepend "brl," before the device type, for instance
@@ -518,8 +522,8 @@ and is between 256 and 4096 characters. It is defined in the file
 		For now, only VisioBraille is supported.
 
 	earlycon=	[KNL] Output early console device and options.
-		uart[8250],io,<addr>[,options]
-		uart[8250],mmio,<addr>[,options]
+		uart[8250],io,<addr>[,options,[base]]
+		uart[8250],mmio,<addr>[,options,[base]]
 			Start an early, polled-mode console on the 8250/16550
 			UART at the specified I/O port or MMIO address.
 			The options are the same as for ttyS, above.
diff --git a/drivers/serial/8250_early.c b/drivers/serial/8250_early.c
index f279745..edd5803 100644
--- a/drivers/serial/8250_early.c
+++ b/drivers/serial/8250_early.c
@@ -180,6 +180,11 @@ static int __init parse_options(struct early_serial8250_device *device,
 		snprintf(device->options, sizeof(device->options), "%u",
 			device->baud);
 	}
+	options = strchr(options, ',');
+	if (options) {
+		options++;
+		port->uartclk = simple_strtoul(options, NULL, 0) * 16;
+	}
 
 	printk(KERN_INFO "Early serial console at %s 0x%llx (options '%s')\n",
 		mmio ? "MMIO" : "I/O port",
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/