Re: [PATCH] Disable ioat channel only on platforms where ile drivercan load

From: Len Brown
Date: Fri Oct 24 2008 - 13:03:49 EST


applied to acpi-test

thanks,
-len

On Wed, 22 Oct 2008, Venki Pallipadi wrote:

> On Wed, Oct 22, 2008 at 12:19:22AM -0700, Andi Kleen wrote:
> > Pallipadi, Venkatesh wrote:
> > >
> > >>> +#if CONFIG_I7300_IDLE_IOAT_CHANNEL
> > >>> + device->common.chancnt--;
> > >>> +#endif
> > >> I still think this lone decrement looks fishy. Can there please be some
> > >> explanation how it exactly relates to the i7300 idle driver, where the
> > >> matching increment is, etc.?
> > >
> > > No. This is not a increment/decrement thing. It is basically telling other
> > > Users of IOAT that they have one IOAT channel less that they can use.
> > > The last IOAT channel is used by i7300 idle driver to get the throttling to
> > > work.
> >
> > Ok then it should be made conditional on the i7300 actually be available
> > in the system? It looks like you do it always no matter what chipset is in there.
>
> Does the patch below look OK?
>
> Thanks,
> Venki
>
> Based on input from Andi Kleen:
> share the platform detection code with ioat_dma and disable the channel in
> dma engine only for specific platforms.
>
> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@xxxxxxxxx>
>
> ---
> drivers/dma/ioat_dma.c | 5 ++
> drivers/idle/i7300_idle.c | 72 +--------------------------------------
> include/linux/i7300_idle.h | 83 +++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 89 insertions(+), 71 deletions(-)
>
> Index: linux-acpi-2.6/drivers/idle/i7300_idle.c
> ===================================================================
> --- linux-acpi-2.6.orig/drivers/idle/i7300_idle.c 2008-10-22 11:42:04.000000000 -0700
> +++ linux-acpi-2.6/drivers/idle/i7300_idle.c 2008-10-22 11:42:46.000000000 -0700
> @@ -25,6 +25,7 @@
> #include <linux/delay.h>
> #include <linux/debugfs.h>
> #include <linux/stop_machine.h>
> +#include <linux/i7300_idle.h>
>
> #include <asm/idle.h>
>
> @@ -505,77 +506,8 @@ static struct notifier_block i7300_idle_
> .notifier_call = i7300_idle_notifier,
> };
>
> -/*
> - * I/O AT controls (PCI bus 0 device 8 function 0)
> - * DIMM controls (PCI bus 0 device 16 function 1)
> - */
> -#define IOAT_BUS 0
> -#define IOAT_DEVFN PCI_DEVFN(8, 0)
> -#define MEMCTL_BUS 0
> -#define MEMCTL_DEVFN PCI_DEVFN(16, 1)
> -
> -struct fbd_ioat {
> - unsigned int vendor;
> - unsigned int ioat_dev;
> -};
> -
> -/*
> - * The i5000 chip-set has the same hooks as the i7300
> - * but support is disabled by default because this driver
> - * has not been validated on that platform.
> - */
> -#define SUPPORT_I5000 0
> -
> -static const struct fbd_ioat fbd_ioat_list[] = {
> - {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB},
> -#if SUPPORT_I5000
> - {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT},
> -#endif
> - {0, 0}
> -};
> -
> -/* table of devices that work with this driver */
> -static const struct pci_device_id pci_tbl[] = {
> - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_FBD_CNB) },
> -#if SUPPORT_I5000
> - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) },
> -#endif
> - { } /* Terminating entry */
> -};
> -
> MODULE_DEVICE_TABLE(pci, pci_tbl);
>
> -/* Check for known platforms with I/O-AT */
> -static int __init i7300_idle_platform_probe(void)
> -{
> - int i;
> -
> - fbd_dev = pci_get_bus_and_slot(MEMCTL_BUS, MEMCTL_DEVFN);
> - if (!fbd_dev)
> - return -ENODEV;
> -
> - for (i = 0; pci_tbl[i].vendor != 0; i++) {
> - if (fbd_dev->vendor == pci_tbl[i].vendor &&
> - fbd_dev->device == pci_tbl[i].device) {
> - break;
> - }
> - }
> - if (pci_tbl[i].vendor == 0)
> - return -ENODEV;
> -
> - ioat_dev = pci_get_bus_and_slot(IOAT_BUS, IOAT_DEVFN);
> - if (!ioat_dev)
> - return -ENODEV;
> -
> - for (i = 0; fbd_ioat_list[i].vendor != 0; i++) {
> - if (ioat_dev->vendor == fbd_ioat_list[i].vendor &&
> - ioat_dev->device == fbd_ioat_list[i].ioat_dev) {
> - return 0;
> - }
> - }
> - return -ENODEV;
> -}
> -
> int stats_open_generic(struct inode *inode, struct file *fp)
> {
> fp->private_data = inode->i_private;
> @@ -617,7 +549,7 @@ static int __init i7300_idle_init(void)
> cpus_clear(idle_cpumask);
> total_us = 0;
>
> - if (i7300_idle_platform_probe())
> + if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev))
> return -ENODEV;
>
> if (i7300_idle_thrt_save())
> Index: linux-acpi-2.6/include/linux/i7300_idle.h
> ===================================================================
> --- /dev/null 1970-01-01 00:00:00.000000000 +0000
> +++ linux-acpi-2.6/include/linux/i7300_idle.h 2008-10-22 11:42:46.000000000 -0700
> @@ -0,0 +1,83 @@
> +
> +#ifndef I7300_IDLE_H
> +#define I7300_IDLE_H
> +
> +#include <linux/pci.h>
> +
> +/*
> + * I/O AT controls (PCI bus 0 device 8 function 0)
> + * DIMM controls (PCI bus 0 device 16 function 1)
> + */
> +#define IOAT_BUS 0
> +#define IOAT_DEVFN PCI_DEVFN(8, 0)
> +#define MEMCTL_BUS 0
> +#define MEMCTL_DEVFN PCI_DEVFN(16, 1)
> +
> +struct fbd_ioat {
> + unsigned int vendor;
> + unsigned int ioat_dev;
> +};
> +
> +/*
> + * The i5000 chip-set has the same hooks as the i7300
> + * but support is disabled by default because this driver
> + * has not been validated on that platform.
> + */
> +#define SUPPORT_I5000 0
> +
> +static const struct fbd_ioat fbd_ioat_list[] = {
> + {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB},
> +#if SUPPORT_I5000
> + {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT},
> +#endif
> + {0, 0}
> +};
> +
> +/* table of devices that work with this driver */
> +static const struct pci_device_id pci_tbl[] = {
> + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_FBD_CNB) },
> +#if SUPPORT_I5000
> + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) },
> +#endif
> + { } /* Terminating entry */
> +};
> +
> +/* Check for known platforms with I/O-AT */
> +static inline int i7300_idle_platform_probe(struct pci_dev **fbd_dev,
> + struct pci_dev **ioat_dev)
> +{
> + int i;
> + struct pci_dev *memdev, *dmadev;
> +
> + memdev = pci_get_bus_and_slot(MEMCTL_BUS, MEMCTL_DEVFN);
> + if (!memdev)
> + return -ENODEV;
> +
> + for (i = 0; pci_tbl[i].vendor != 0; i++) {
> + if (memdev->vendor == pci_tbl[i].vendor &&
> + memdev->device == pci_tbl[i].device) {
> + break;
> + }
> + }
> + if (pci_tbl[i].vendor == 0)
> + return -ENODEV;
> +
> + dmadev = pci_get_bus_and_slot(IOAT_BUS, IOAT_DEVFN);
> + if (!dmadev)
> + return -ENODEV;
> +
> + for (i = 0; fbd_ioat_list[i].vendor != 0; i++) {
> + if (dmadev->vendor == fbd_ioat_list[i].vendor &&
> + dmadev->device == fbd_ioat_list[i].ioat_dev) {
> + if (fbd_dev)
> + *fbd_dev = memdev;
> + if (ioat_dev)
> + *ioat_dev = dmadev;
> +
> + return 0;
> + }
> + }
> + return -ENODEV;
> +}
> +
> +#endif
> Index: linux-acpi-2.6/drivers/dma/ioat_dma.c
> ===================================================================
> --- linux-acpi-2.6.orig/drivers/dma/ioat_dma.c 2008-10-22 11:42:04.000000000 -0700
> +++ linux-acpi-2.6/drivers/dma/ioat_dma.c 2008-10-22 11:42:46.000000000 -0700
> @@ -33,6 +33,7 @@
> #include <linux/delay.h>
> #include <linux/dma-mapping.h>
> #include <linux/workqueue.h>
> +#include <linux/i7300_idle.h>
> #include "ioatdma.h"
> #include "ioatdma_registers.h"
> #include "ioatdma_hw.h"
> @@ -172,7 +173,9 @@ static int ioat_dma_enumerate_channels(s
> xfercap = (xfercap_scale == 0 ? -1 : (1UL << xfercap_scale));
>
> #if CONFIG_I7300_IDLE_IOAT_CHANNEL
> - device->common.chancnt--;
> + if (i7300_idle_platform_probe(NULL, NULL) == 0) {
> + device->common.chancnt--;
> + }
> #endif
> for (i = 0; i < device->common.chancnt; i++) {
> ioat_chan = kzalloc(sizeof(*ioat_chan), GFP_KERNEL);
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/