Re: [Bug] pci allocation resources problems on x86_64

[Yinghai Lu]

On Sat, Oct 25, 2008 at 1:45 AM, Yinghai Lu <yinghai@xxxxxxxxxx> wrote:
> On Fri, Oct 24, 2008 at 1:10 PM,  <mathieu.taillefumier@xxxxxxx> wrote:
>> Hi,
>>
>>> Ultimately we need to do better at grabbing space for PCI allocations on x86.
>>> I was hoping we'd have some patches in 2.6.28 that would help here, but they
>>> weren't ready in time.  Can you file a kernel.org bug for this problem with
>>> the files attached?  I'll try to find time to put together some
>>> improvements...
>>
>> yes sure. I will do that this weekend. I already grab some more information
>> about this problem by reading docs. The problem seems related to iommu setup
>> since it is not activated when the mem < 3G but activated when the mem>3G. I do
>> not understand however how the kernel can report more that 4g of memory when
>> there are only 4g installed (So I think that the bios is buggy too). I also
>> remarked that the size of the /proc/mem file is not what it is intended to be.
>> Another supprizing thing is these lines of the dmesg-not-working file
>>
>> pci 0000:0a:00.0: BAR 0: got res [0x140000000-0x1400007ff] bus [0x140000000-0x14
>> 00007ff] flags 0x20200
>> pci 0000:0a:00.0: BAR 0: moved to bus [0x140000000-0x1400007ff] flags 0x20200
>>
>> it seems that the drivers setup some resources that way behind the available
>> memory.
>
> looks like that kernel do the right thing...
>
> pci 0000:00:1f.3: BAR 0: got res [0xc2000000-0xc20000ff] bus
> [0xc2000000-0xc20000ff] flags 0x20200
> pci 0000:00:1f.3: BAR 0: moved to bus [0xc2000000-0xc20000ff] flags 0x20200
> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
> pci 0000:00:1c.0:   IO window: 0x2000-0x2fff
> pci 0000:00:1c.0:   MEM window: 0xf6000000-0xf7ffffff
> pci 0000:00:1c.0:   PREFETCH window: 0x000000f0000000-0x000000f1ffffff
> pci 0000:00:1c.1: PCI bridge, secondary bus 0000:06
> pci 0000:00:1c.1:   IO window: 0x3000-0x3fff
> pci 0000:00:1c.1:   MEM window: 0xf8000000-0xf9ffffff
> pci 0000:00:1c.1:   PREFETCH window: 0x000000f2000000-0x000000f3ffffff
> pci 0000:07:00.0: BAR 6: got res [0xf4000000-0xf401ffff] bus
> [0xf4000000-0xf401ffff] flags 0x27200
> pci 0000:00:1c.2: PCI bridge, secondary bus 0000:07
> pci 0000:00:1c.2:   IO window: 0x4000-0x4fff
> pci 0000:00:1c.2:   MEM window: 0xfa000000-0xfbffffff
> pci 0000:00:1c.2:   PREFETCH window: 0x000000f4000000-0x000000f5ffffff
> pci 0000:00:1c.3: PCI bridge, secondary bus 0000:08
> pci 0000:00:1c.3:   IO window: 0x5000-0x5fff
> pci 0000:00:1c.3:   MEM window: 0xc8000000-0xc9ffffff
> pci 0000:00:1c.3:   PREFETCH window: 0x000000cc000000-0x000000cdffffff
> pci 0000:09:04.0: CardBus bridge, secondary bus 0000:0a
> pci 0000:09:04.0:   IO window: 0x006000-0x0060ff
> pci 0000:09:04.0:   IO window: 0x006400-0x0064ff
> pci 0000:09:04.0:   PREFETCH window: 0xc4000000-0xc7ffffff
> pci 0000:09:04.0:   MEM window: 0x140000000-0x143ffffff
> pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
> pci 0000:00:1e.0:   IO window: 0x6000-0x6fff
> pci 0000:00:1e.0:   MEM window: 0xfc200000-0xfc2fffff
> pci 0000:00:1e.0:   PREFETCH window: 0x000000c4000000-0x000000c7ffffff
> ...
>
> bus: 00 index 0 io port: [0, ffff]
> bus: 00 index 1 mmio: [0, ffffffffffffffff]
> bus: 02 index 0 io port: [2000, 2fff]
> bus: 02 index 1 mmio: [f6000000, f7ffffff]
> bus: 02 index 2 mmio: [f0000000, f1ffffff]
> bus: 02 index 3 mmio: [0, 0]
> bus: 06 index 0 io port: [3000, 3fff]
> bus: 06 index 1 mmio: [f8000000, f9ffffff]
> bus: 06 index 2 mmio: [f2000000, f3ffffff]
> bus: 06 index 3 mmio: [0, 0]
> bus: 07 index 0 io port: [4000, 4fff]
> bus: 07 index 1 mmio: [fa000000, fbffffff]
> bus: 07 index 2 mmio: [f4000000, f5ffffff]
> bus: 07 index 3 mmio: [0, 0]
> bus: 08 index 0 io port: [5000, 5fff]
> bus: 08 index 1 mmio: [c8000000, c9ffffff]
> bus: 08 index 2 mmio: [cc000000, cdffffff]
> bus: 08 index 3 mmio: [0, 0]
> bus: 09 index 0 io port: [6000, 6fff]
> bus: 09 index 1 mmio: [fc200000, fc2fffff]
> bus: 09 index 2 mmio: [c4000000, c7ffffff]
> bus: 09 index 3 io port: [0, ffff]
> bus: 09 index 4 mmio: [0, ffffffffffffffff]
> bus: 0a index 0 io port: [6000, 60ff]
> bus: 0a index 1 io port: [6400, 64ff]
> bus: 0a index 2 mmio: [c4000000, c7ffffff]
> bus: 0a index 3 mmio: [140000000, 143ffffff]
>
> because card bus need 0x4000000
>
> resource before that already allocated to 0xce000000
>
> and it can not use 0xd000000, because
> pci 0000:00:02.0: found [8086/2a02] class 000300 header type 00
> PCI: 0000:00:02.0 reg 10 64bit mmio: [fc000000, fc0fffff]
> PCI: 0000:00:02.0 reg 18 32bit mmio: [d0000000, dfffffff]
> PCI: 0000:00:02.0 reg 20 io port: [1800, 1807]
>
> so it has to start from 0x140000000 after the RAM...
>
> and that range it can not use that...
>
> only solution could be
>
> Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
>
> about pci_mem_start from 0xc1000000 instead of 0xc200000
>
> __init void e820_setup_gap(void)
> {
>        unsigned long gapstart, gapsize, round;
>        int found;
>
>        gapstart = 0x10000000;
>        gapsize = 0x400000;
>        found  = e820_search_gap(&gapstart, &gapsize, 0, MAX_GAP_END);
>
> #ifdef CONFIG_X86_64
>        if (!found) {
>                gapstart = (max_pfn << PAGE_SHIFT) + 1024*1024;
>                printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit "
>                       "address range\n"
>                       KERN_ERR "PCI: Unassigned devices with 32bit resource "
>                       "registers may break!\n");
>        }
> #endif
>
>        /*
>         * See how much we want to round up: start off with
>         * rounding to the next 1MB area.
>         */
>        round = 0x100000;
>        while ((gapsize >> 4) > round)
>                round += round;
>        /* Fun with two's complement */
>        pci_mem_start = (gapstart + round) & -round;
>
>        printk(KERN_INFO
>               "Allocating PCI resources starting at %lx (gap: %lx:%lx)\n",
>               pci_mem_start, gapstart, gapsize);
> }
>
>
> please check if you can change memhole size in BIOS... if not, we can
> have more patch for it....make pci_mem_start more compact...
>

it is more worse

pci 0000:00:1c.3: scanning behind bridge, config 080800, pass 0
PCI: Scanning bus 0000:08
PCI: Fixups for bus 0000:08
PCI: bridge 0000:00:1c.3 io port: [5000, 5fff]
PCI: bridge 0000:00:1c.3 32bit mmio: [c8000000, c9ffffff]
PCI: bridge 0000:00:1c.3 64bit mmio pref: [cc000000, cdffffff]
PCI: Bus scan for 0000:08 returning with max=08

that c800000 and cc00000 is allocated by BIOS...

may need to set pci_mem_start to 0xc0000000.
and let 0x1f.3 to use 0xca00000

YH
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/