[PATCH] pmac_zilog console polling support

[Chris J Arges]

Implemented poll_get_char and poll_put_char for console polling which then
enables kgdb to work on machines (for example the Apple PowerMac G5) that use
the pmac_zilog serial driver.
---
 drivers/serial/pmac_zilog.c |   27 +++++++++++++++++++++++++++
 1 files changed, 27 insertions(+), 0 deletions(-)

diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 317b061..ad34885 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -1383,6 +1383,29 @@ static int pmz_verify_port(struct uart_port *port, struct serial_struct *ser)
 	return -EINVAL;
 }
 
+#ifdef CONFIG_CONSOLE_POLL
+
+static int pmz_poll_get_char(struct uart_port *port)
+{
+	struct uart_pmac_port *uap = (struct uart_pmac_port *)port;
+
+	while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0)
+		udelay(5);
+	return read_zsdata(uap);
+}
+
+static void pmz_poll_put_char(struct uart_port *port, unsigned char c)
+{
+	struct uart_pmac_port *uap = (struct uart_pmac_port *)port;
+
+	/* Wait for the transmit buffer to empty. */
+	while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0)
+		udelay(5);
+	write_zsdata(uap, c);
+}
+
+#endif
+
 static struct uart_ops pmz_pops = {
 	.tx_empty	=	pmz_tx_empty,
 	.set_mctrl	=	pmz_set_mctrl,
@@ -1400,6 +1423,10 @@ static struct uart_ops pmz_pops = {
 	.request_port	=	pmz_request_port,
 	.config_port	=	pmz_config_port,
 	.verify_port	=	pmz_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_get_char	=	pmz_poll_get_char,
+	.poll_put_char	=	pmz_poll_put_char,
+#endif
 };
 
 /*
-- 
1.5.4.5

Signed-off-by: Chris J Arges <arges@xxxxxxxxxxxxxxxxxx>


--------------060201080701010006090103--
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/