Re: usb device not showing up

[Alan Stern]

On Thu, 6 Nov 2008, Norbert Preining wrote:

> Here it is. Sequence of events:
> - turn off the laptop, physically
> - turn it on
> - boot in to linux with modular usb and init=/bin/bash
> - mount /proc, /sys, /sys/kernel/debug
> - modprobe usbmon (file /sys/kernel/debug/usbmon/{0s,0u} are present)
> - start some getty to have more terminals, mount / rw
> 
> - cat /sys/kernel/debug/usbmon/0u > usbmon-bad.txt
> - modprobe uhci-hcd
> - modprobe hso
> 
> The device does not show up in /proc/bus/usb/devices (mounted before
> probing and debugging), only bus 4 hub is there.

Okay.  In the earlier (working) test, the modem showed up on bus 4, not
bus 2.  Not that it matters much -- the modem didn't show up at all in
this test, on any bus.  Its USB interface seems to be electrically
disconnected or turned off.

Evidently the system needs to do something to tell the modem that it
should start working, but I have no idea what that would be.  It's not 
a USB issue; as far as USB is concerned the device just isn't there at 
all.  Maybe the hso developers will have some idea.  Or maybe it's 
controlled by a setting in your laptop's BIOS.

> /sys/bus/usb/drivers/hso/ shows
> 	bind  module  new_id  uevent  unbind
> 
> - sync
> - cat process
> 
> Outcome is the attached usbmon-bad.txt
> 
> This is the one where the device does not show up.

Interestingly, this trace appears to be missing some events.  There's a
gap between timestamps 4284549076 and 4284645743 (the timestamps are in
the second column) where we should see the initialization of bus 5 and
bus 6.  Instead there's a 100-ms delay in which nothing happens,
followed later on by the second initialization phase for those two
buses.

I have to wonder...  Did you remove any part of the trace?  Did usbmon 
malfunction?  Did parts of the initialization for those two buses 
really get skipped (I can't imagine how)?

Pete, any ideas?

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/