Re: [2.6.28-rc5] TSC sync error and high hrtimer_start (was: Bootup time regression from 2.6.27 to 2.6.28-rc3+)

[Frans Pop]

On Sunday 16 November 2008, Frans Pop wrote:
> Possibly this may be related to this diff in the boot messages:
> -checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> +checking TSC synchronization [CPU#0 -> CPU#1]:
> +Measured 696 cycles TSC warp between CPUs, turning off TSC clock.
> +Marking TSC unstable due to check_tsc_sync_source failed
>
> With .27.4 TSC _always_ passed. Now, with .28-rc5 I get this warp. I've
> done two boots so far, for the other one the warp was 680 cycles.

Maybe this extra context a bit earlier in dmesg is relevant here:

-Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.76 BogoMIPS (lpj=12799520)
+HPET: 3 timers in total, 0 timers will be used for per-cpu timer
+Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.73 BogoMIPS (lpj=12799476)
[...]
-ACPI: Core revision 20080609
+ACPI: Core revision 20080926
+Setting APIC routing to flat
 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
 CPU0: Intel(R) Pentium(R) D CPU 3.20GHz stepping 07
-Using local APIC timer interrupts.
-APIC timer calibration result 12499520
-Detected 12.499 MHz APIC timer.
-Booting processor 1/1 ip 6000
+Booting processor 1 APIC 0x1 ip 0x6000
 Initializing CPU#1
-Calibrating delay using timer specific routine.. 6399.94 BogoMIPS (lpj=12799898)
+Calibrating delay using timer specific routine.. 6198.05 BogoMIPS (lpj=12396107)

Note the rather large difference in BogoMIPS between core 0 and 1.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/