Re: ST31500341AS vs ICH10, exception Emask 0x50 SAct 0x1 SErr 0x280900action 0x6 frozen
From: Justin Piszcz
Date: Tue Dec 02 2008 - 04:49:34 EST
On Tue, 2 Dec 2008, Soeren Sonnenburg wrote:
Dear all,
I just purchased a seagate 1.5TB drive ST31500341AS, with firmware
revision CC1G (which according to seagate is not affected by the cache
flush bug) and I am getting the errors below (after almost a day of
uptime without problems). The drive is replacing a 750G variant from
seagate with which I had months of uptime and no errors whatsoever.
I hope anyone has an idea?
- relevant part of hdparm -I and lspci
ATA device, with non-removable media
Model Number: ST31500341AS
Firmware Revision: CC1G
Transport: Serial
00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA
AHCI Controller
- the error(tm)
A few items:
res 40/00:00:48:19:67/00:00:1e:00:00/40 Emask 0x50 (ATA bus error)
ata3: SError: { UnrecovData HostInt 10B8B BadCRC }
These are usually realted to a bad cable or connector.
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Did you remove the 1.5 Gbps jumper so it can run at 3.0 Gbps?
Justin.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/