Re: pl2303 - pl2303_open - failed submitting interrupt urb, error-28

[Alan Stern]

On Fri, 5 Dec 2008, Marc Haber wrote:

> On Wed, Dec 03, 2008 at 07:47:25AM -0800, Greg KH wrote:
> > I would suggest using a USB 1.1 hub instead if you have to use this kind
> > of hardware set up.
> 
> It is nearly impossible to buy that kind of hardware at the current
> time.
> 
> >   I think the core is just not able to schedule so many interrupt urbs
> >   with such a setup, running USB 1.1 devices behind a USB 2.0 hub like
> >   this is a very difficult thing to do.
> > 
> > Sorry I don't have a better solution.
> 
> Is it possible to disable USB 2.0 for selected links?

Yes it is.  You can force port P of the EHCI controller on bus B to run 
at low/full speed by doing:

	echo P >/sys/class/usb_host/usb_hostB/companion

To allow port P to run at high speed again, use the same command but 
write -P instead of P.

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/