Re: [PATCH] rtc-ds1307: True SMBus compatibility

[Jean Delvare]

Hi Ed,

On Wed, 7 Jan 2009 07:22:12 -0800, Ed Swierk wrote:
> On Wed, Jan 7, 2009 at 5:24 AM, Jean Delvare <khali@xxxxxxxxxxxx> wrote:
> > Are you certain the nForce2 controllers can't do it? The i2c-nforce2
> > driver doesn't implement it, but this doesn't mean the hardware can't
> > do it. I don't have any datasheet for these chips, but I know their
> > SMBus implementation is very similar to those of the AMD 8111, and
> > i2c-amd8111 has support for I2C block reads and writes. I think it
> > would be worth giving it a try, by copying the i2c-amd8111
> > implementation into the i2c-nforce2 driver and seeing if it happens to
> > just work. If it works, that would be more elegant than your proposed
> > hack to the rtc-ds1307 driver.
> 
> I checked the datasheet and also tried every possible SMBus command
> value to try to discover any supported commands that the i2c-nforce2
> driver happens not to use, to no avail. The nVidia SMBus is pure
> SMBus.

Did you try 0x4a (as i2c-amd8111 is using)?

So, you have the datasheet... Is this something you would be allowed to
share with me?

> I could change the ds1307 driver to check whether the controller
> supports i2c block commands and fall back to emulation only if they
> are not available. Would that address your concerns?

Yes, that would. Same thing the eeprom or lm93 drivers are doing, to
only name a few of them. Should be fairly easy.

-- 
Jean Delvare
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/