Re: Regression 2.6.28-git: suspend/resume failure. git bisected to usb suspend/resume patch

From: Rafael J. Wysocki
Date: Mon Jan 12 2009 - 12:26:07 EST


On Monday 12 January 2009, Rafael J. Wysocki wrote:
> On Monday 12 January 2009, Rafael J. Wysocki wrote:
> > On Sunday 11 January 2009, Christian Borntraeger wrote:
> > > Hello Alan,
> > >
> > > git bisect found this patch
> > >
> > > a0d4922da2e4ccb0973095d8d29f36f6b1b5f703 is first bad commit
> > > commit a0d4922da2e4ccb0973095d8d29f36f6b1b5f703
> > > Author: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
> > > Date: Wed Dec 17 15:06:03 2008 -0500
> > >
> > > USB: fix up suspend and resume for PCI host controllers
> > >
> > > This patch (as1192) rearranges the USB PCI host controller suspend and
> > > resume and resume routines:
> > >
> > >
> > > To cause my suspend to ram problem with my Thinkpad T61p.
> > > I can confirm that
> > > a81a81a25d3ecdab777abca87c5ddf484056103d works
> > > and a0d4922da2e4ccb0973095d8d29f36f6b1b5f703 does not work.
> > >
> > > Thing is, 29-rc1 with a0d4922da2e4ccb0973095d8d29f36f6b1b5f703 reverted also
> > > fails with suspend/resume. Seems that there was another problem introduced
> > > after that patch.

Please see if reverting commit 7503bfbae89eba07b46441a5d1594647f6b8ab7d
(cpumask: use work_on_cpu in acpi-cpufreq.c for drv_read and drv_write) in
addition to a0d4922da2e4ccb0973095d8d29f36f6b1b5f703 helps.

Also, please check if the appended patch fixes the issue with
a0d4922da2e4ccb0973095d8d29f36f6b1b5f703 .

Thanks,
Rafael


---
drivers/usb/core/hcd-pci.c | 96 +++++++-------------------------------------
drivers/usb/core/hcd.h | 1
drivers/usb/host/ehci-pci.c | 1
drivers/usb/host/ohci-pci.c | 1
drivers/usb/host/uhci-hcd.c | 1
5 files changed, 16 insertions(+), 84 deletions(-)

Index: linux-2.6/drivers/usb/core/hcd-pci.c
===================================================================
--- linux-2.6.orig/drivers/usb/core/hcd-pci.c
+++ linux-2.6/drivers/usb/core/hcd-pci.c
@@ -201,6 +201,7 @@ int usb_hcd_pci_suspend(struct pci_dev *
struct usb_hcd *hcd = pci_get_drvdata(dev);
int retval = 0;
int wake, w;
+ int has_pci_pm;

/* Root hub suspend should have stopped all downstream traffic,
* and all bus master traffic. And done so for both the interface
@@ -247,26 +248,6 @@ int usb_hcd_pci_suspend(struct pci_dev *
* low power state, if the hardware allows.
*/
pci_disable_device(dev);
- done:
- return retval;
-}
-EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
-
-/**
- * usb_hcd_pci_suspend_late - suspend a PCI-based HCD after IRQs are disabled
- * @dev: USB Host Controller being suspended
- * @message: Power Management message describing this state transition
- *
- * Store this function in the HCD's struct pci_driver as .suspend_late.
- */
-int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t message)
-{
- int retval = 0;
- int has_pci_pm;
-
- /* We might already be suspended (runtime PM -- not yet written) */
- if (dev->current_state != PCI_D0)
- goto done;

pci_save_state(dev);

@@ -315,7 +296,7 @@ int usb_hcd_pci_suspend_late(struct pci_
done:
return retval;
}
-EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_late);
+EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);

/**
* usb_hcd_pci_resume_early - resume a PCI-based HCD before IRQs are enabled
@@ -325,65 +306,8 @@ EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_la
*/
int usb_hcd_pci_resume_early(struct pci_dev *dev)
{
- int retval = 0;
- pci_power_t state = dev->current_state;
-
-#ifdef CONFIG_PPC_PMAC
- /* Reenable ASIC clocks for USB */
- if (machine_is(powermac)) {
- struct device_node *of_node;
-
- of_node = pci_device_to_OF_node(dev);
- if (of_node)
- pmac_call_feature(PMAC_FTR_USB_ENABLE,
- of_node, 0, 1);
- }
-#endif
-
- /* NOTE: chip docs cover clean "real suspend" cases (what Linux
- * calls "standby", "suspend to RAM", and so on). There are also
- * dirty cases when swsusp fakes a suspend in "shutdown" mode.
- */
- if (state != PCI_D0) {
-#ifdef DEBUG
- int pci_pm;
- u16 pmcr;
-
- pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM);
- pci_read_config_word(dev, pci_pm + PCI_PM_CTRL, &pmcr);
- pmcr &= PCI_PM_CTRL_STATE_MASK;
- if (pmcr) {
- /* Clean case: power to USB and to HC registers was
- * maintained; remote wakeup is easy.
- */
- dev_dbg(&dev->dev, "resume from PCI D%d\n", pmcr);
- } else {
- /* Clean: HC lost Vcc power, D0 uninitialized
- * + Vaux may have preserved port and transceiver
- * state ... for remote wakeup from D3cold
- * + or not; HCD must reinit + re-enumerate
- *
- * Dirty: D0 semi-initialized cases with swsusp
- * + after BIOS init
- * + after Linux init (HCD statically linked)
- */
- dev_dbg(&dev->dev, "resume from previous PCI D%d\n",
- state);
- }
-#endif
-
- retval = pci_set_power_state(dev, PCI_D0);
- } else {
- /* Same basic cases: clean (powered/not), dirty */
- dev_dbg(&dev->dev, "PCI legacy resume\n");
- }
-
- if (retval < 0)
- dev_err(&dev->dev, "can't resume: %d\n", retval);
- else
- pci_restore_state(dev);
-
- return retval;
+ pci_restore_state(dev);
+ return 0;
}
EXPORT_SYMBOL_GPL(usb_hcd_pci_resume_early);

@@ -398,6 +322,18 @@ int usb_hcd_pci_resume(struct pci_dev *d
struct usb_hcd *hcd;
int retval;

+#ifdef CONFIG_PPC_PMAC
+ /* Reenable ASIC clocks for USB */
+ if (machine_is(powermac)) {
+ struct device_node *of_node;
+
+ of_node = pci_device_to_OF_node(dev);
+ if (of_node)
+ pmac_call_feature(PMAC_FTR_USB_ENABLE,
+ of_node, 0, 1);
+ }
+#endif
+
hcd = pci_get_drvdata(dev);
if (hcd->state != HC_STATE_SUSPENDED) {
dev_dbg(hcd->self.controller,
Index: linux-2.6/drivers/usb/core/hcd.h
===================================================================
--- linux-2.6.orig/drivers/usb/core/hcd.h
+++ linux-2.6/drivers/usb/core/hcd.h
@@ -257,7 +257,6 @@ extern void usb_hcd_pci_remove(struct pc

#ifdef CONFIG_PM
extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg);
-extern int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t msg);
extern int usb_hcd_pci_resume_early(struct pci_dev *dev);
extern int usb_hcd_pci_resume(struct pci_dev *dev);
#endif /* CONFIG_PM */
Index: linux-2.6/drivers/usb/host/ehci-pci.c
===================================================================
--- linux-2.6.orig/drivers/usb/host/ehci-pci.c
+++ linux-2.6/drivers/usb/host/ehci-pci.c
@@ -432,7 +432,6 @@ static struct pci_driver ehci_pci_driver

#ifdef CONFIG_PM
.suspend = usb_hcd_pci_suspend,
- .suspend_late = usb_hcd_pci_suspend_late,
.resume_early = usb_hcd_pci_resume_early,
.resume = usb_hcd_pci_resume,
#endif
Index: linux-2.6/drivers/usb/host/ohci-pci.c
===================================================================
--- linux-2.6.orig/drivers/usb/host/ohci-pci.c
+++ linux-2.6/drivers/usb/host/ohci-pci.c
@@ -487,7 +487,6 @@ static struct pci_driver ohci_pci_driver

#ifdef CONFIG_PM
.suspend = usb_hcd_pci_suspend,
- .suspend_late = usb_hcd_pci_suspend_late,
.resume_early = usb_hcd_pci_resume_early,
.resume = usb_hcd_pci_resume,
#endif
Index: linux-2.6/drivers/usb/host/uhci-hcd.c
===================================================================
--- linux-2.6.orig/drivers/usb/host/uhci-hcd.c
+++ linux-2.6/drivers/usb/host/uhci-hcd.c
@@ -942,7 +942,6 @@ static struct pci_driver uhci_pci_driver

#ifdef CONFIG_PM
.suspend = usb_hcd_pci_suspend,
- .suspend_late = usb_hcd_pci_suspend_late,
.resume_early = usb_hcd_pci_resume_early,
.resume = usb_hcd_pci_resume,
#endif /* PM */

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/