Re: [PULL -tip] x86: replacing mp_config_X with mpc_X

From: Ingo Molnar
Date: Wed Jan 14 2009 - 06:02:21 EST



* Jaswinder Singh Rajput <jaswinderlinux@xxxxxxxxx> wrote:

> On Mon, Jan 12, 2009 at 6:41 PM, Ingo Molnar <mingo@xxxxxxx> wrote:
> >
> > * Jaswinder Singh Rajput <jaswinder@xxxxxxxxxxxxx> wrote:
> >
> >> -struct mp_config_ioapic {
> >> - unsigned long mp_apicaddr;
> >> - unsigned int mp_apicid;
> >> - unsigned char mp_type;
> >> - unsigned char mp_apicver;
> >> - unsigned char mp_flags;
> >> -};
> >> -
> >> -struct mp_config_intsrc {
> >> - unsigned int mp_dstapic;
> >> - unsigned char mp_type;
> >> - unsigned char mp_irqtype;
> >> - unsigned short mp_irqflag;
> >> - unsigned char mp_srcbus;
> >> - unsigned char mp_srcbusirq;
> >> - unsigned char mp_dstirq;
> >> -};
> >
> > So you replaced that with mpc_ioapic and mpc_intsrc uses:
> >
> > struct mpc_ioapic {
> > unsigned char type;
> > unsigned char apicid;
> > unsigned char apicver;
> > unsigned char flags;
> > unsigned int apicaddr;
> > };
> >
> > struct mpc_intsrc {
> > unsigned char type;
> > unsigned char irqtype;
> > unsigned short irqflag;
> > unsigned char srcbus;
> > unsigned char srcbusirq;
> > unsigned char dstapic;
> > unsigned char dstirq;
> > };
> >
> > And removed the mp_config_ioapic and mp_config_intsrc types.
> >
> > The mp_config_ioapic and mp_config_intsrc types are kernel-internal, while
> > mpc_ioapic and mpc_intsrc is an MP Specification type - the lowlevel
> > structure of these tables as provided in RAM or ROM by the BIOS.
> >
> > Here's the potential problems that need to be thought through:
> >
> > - the biggest potential problem is that apicaddr is 32-bit wide while
> > mp_apicaddr is 64-bit wide, on the 64-bit kernel. Can an apic address be
> > above 4 GB, in an mptable? I dont think it can be.
> >
>
> mp_apicaddr is getting its value from apicaddr which is u32
> (arch/x86/kernel/acpi/boot.c)
> OR
> mp_apicaddr is getting its value from apicaddr which is u32
> (arch/x86/kernel/mpparse.c)
>
> > - another problem could be that dstapic are all 1-byte entities - while in
> > the in-kernel version (mp_apicid and mp_dstapic) they are 32 bit. The
> > ACPI code fills in the tables too so maybe there it can be wider than 8
> > bits?
> >
>
> mp_apicid is getting its value from uniq_ioapic_id(id) which returns
> u8 (arch/x86/kernel/acpi/boot.c)
> OR
> mp_apicid is getting its value from reg_00.bits.ID which also 8 bits
> (arch/x86/kernel/io_apic.c)
> OR
> mp_apicid is getting its value from apicid which also 8 bits
> (arch/x86/kernel/mpparse.c)
>
> and
>
> mp_dstapic is getting its value from mp_apicid which is already 8 bits
> (arch/x86/kernel/acpi/boot.c)
> OR
> mp_dstapic is getting its value from mpc_intsrc->dstapic which is
> already 8 bits (arch/x86/kernel/mpparse.c)
>
> By using current structure we are wasting space as well as creating
> confusion for checking u8 <-> u32 and u32 <-> u64.

ok, that sounds fair enough - double-checking that we are not introducing
some stupid limit somewhere was important.

I've pulled your two cleanup commits, thanks,

Ingo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/