Re: [PATCH] mmc: Add driver for Freescale eSDHC controllers

[Anton Vorontsov]

On Wed, Jan 14, 2009 at 09:43:50PM -0600, Kumar Gala wrote:
>
> On Jan 14, 2009, at 1:46 PM, Anton Vorontsov wrote:
>
>> From: Xie Xiaobo <X.Xie@xxxxxxxxxxxxx>
>>
>> This patch adds support for the Freescale Enhanced Secure Digital
>> Host Controller Interface as found in some Freescale PowerPC
>> microprocessors (e.g. MPC837x SOCs).
>>
>> Signed-off-by: Xie Xiaobo <X.Xie@xxxxxxxxxxxxx>
>> Signed-off-by: Konjin Lai <Konjin.Lai@xxxxxxxxxxxxx>
>> Signed-off-by: Joe D'Abbraccio <Joe.D'abbraccio@xxxxxxxxxxxxx>
>> Signed-off-by: Anton Vorontsov <avorontsov@xxxxxxxxxxxxx>
>> ---
>> drivers/mmc/host/Kconfig  |    9 +
>> drivers/mmc/host/Makefile |    1 +
>> drivers/mmc/host/esdhc.c  | 1321 ++++++++++++++++++++++++++++++++++++ 
>> +++++++++
>> drivers/mmc/host/esdhc.h  |  255 +++++++++
>> 4 files changed, 1586 insertions(+), 0 deletions(-)
>> create mode 100644 drivers/mmc/host/esdhc.c
>> create mode 100644 drivers/mmc/host/esdhc.h
>
> Want to work some device tree docs for this.

Will do. Though all the needed nodes already in the .dts files. ;-)

Thanks,

-- 
Anton Vorontsov
email: cbouatmailru@xxxxxxxxx
irc://irc.freenode.net/bd2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/