support of touchscreen reported as eGalax but is not working

[Max Weninger]

Hi

I recently got a used USB touchscreen and try to get it working
It looks like a eGalax type but not really is :-(

I am using kernel 2.6.28.2 but also tried the one that comes with
fedora 10 (2.6.27) When I connect the touchscreen dmesg shows

usb 2-1: new low speed USB device using uhci_hcd and address 13
usb 2-1: string descriptor 0 read error: -32
usb 2-1: string descriptor 0 read error: -32
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: string descriptor 0 read error: -32
generic-usb: probe of 0003:0EEF:0001.000B failed with error -32
usb 2-1: New USB device found, idVendor=0eef, idProduct=0001
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0

lsusb -vv for the device gives

Bus 002 Device 013: ID 0eef:0001 D-WAV Scientific Co., Ltd eGalax
TouchScreen Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0x0eef D-WAV Scientific Co., Ltd
  idProduct          0x0001 eGalax TouchScreen
  bcdDevice            1.00
  iManufacturer           1
  iProduct                2
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           34
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          4
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower               44mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      0 No Subclass
      bInterfaceProtocol      0 None
      iInterface              0
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.12
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength     141
         Report Descriptors:
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval               5

/proc/bus/usb/devices gives

T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=1.5 MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0eef ProdID=0001 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 44mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=5ms

I compared this output to other eGalax and discovered some differences
like that iManufactur and iProduct is not filled also
bInterfaceSubClass and bInterfaceProtocol

The kernel is not installing any input device for the touchscreen
so /proc/bus/input/devices does not show the touchscreen

To check if the thing is actually working I did a quick test on XP
and there it works.

Any chance to get this thing working?
I can test any patch maybe required and provide more information if
needed. If am wrong on this mailing list please tell me where
I should post this question.

Thanks for any help

Max

Attachment: signature.asc
Description: PGP signature