Re: [Linux 2.6.29-rc2] BUG: using smp_processor_id() in preemptible

From: Ingo Molnar
Date: Mon Jan 26 2009 - 15:36:38 EST



* Rafael J. Wysocki <rjw@xxxxxxx> wrote:

> On Monday 26 January 2009, Ingo Molnar wrote:
> >
> > * Rafael J. Wysocki <rjw@xxxxxxx> wrote:
> >
> > > On Monday 26 January 2009, Linus Torvalds wrote:
> > > >
> > > > On Sat, 17 Jan 2009, Maciej Rutecki wrote:
> > > > >
> > > > > During suspend to ram:
> > > > > [ 131.287012] BUG: using smp_processor_id() in preemptible [00000000]
> > > > > code: suspend_to_ram./2958
> > > > > [ 131.287012] caller is retrigger_next_event+0x13/0xb0
> > > > > [ 131.287012] Pid: 2958, comm: suspend_to_ram. Not tainted 2.6.29-rc2 #1
> > > > > [ 131.287012] Call Trace:
> > > > > [ 131.287012] [<c025b41f>] debug_smp_processor_id+0xbf/0xd0
> > > > > [ 131.287012] [<c01473b3>] retrigger_next_event+0x13/0xb0
> > > > > [ 131.287012] [<c01489b7>] raw_notifier_call_chain+0x17/0x20
> > > > > [ 131.287012] [<c014b938>] timekeeping_resume+0xe8/0x110
> > > > > [ 131.287012] [<c02cc651>] __sysdev_resume+0x11/0x50
> > > > > [ 131.287012] [<c02cc6d7>] sysdev_resume+0x47/0x80
> > > > > [ 131.287012] [<c02d2478>] device_power_up+0x8/0x10
> > > >
> > > > Very scary.
> > > >
> > > > device_power_up() calls sysdev_resume _before_ it enables interrupts so it
> > > > sounds like something else has - very incorrectly - enabled interrupts too
> > > > early in your resume sequence.
> > > >
> > > > The patch that Andrew sent out and that apparently fixed things for you
> > > > should absolutely not have made any difference. This is suspend_enter():
> > > >
> > > > arch_suspend_disable_irqs();
> > > > BUG_ON(!irqs_disabled());
> > > >
> > > > if ((error = device_power_down(PMSG_SUSPEND))) {
> > > > printk(KERN_ERR "PM: Some devices failed to power down\n");
> > > > goto Done;
> > > > }
> > > >
> > > > if (!suspend_test(TEST_CORE))
> > > > error = suspend_ops->enter(state);
> > > >
> > > > device_power_up(PMSG_RESUME);
> > > > Done:
> > > > arch_suspend_enable_irqs();
> > > >
> > > > and notice how the whole thing is surrounded by that
> > > > arch_suspend_disable/enable_irqs().
> > > >
> > > > So it looks like some sysdev driver (device_power_up does the sysdev
> > > > drivers first, so it can't be the regular low-level PCI drivers) is
> > > > enabling interrupts in its resume function. Scary and very wrong.
> > > >
> > > > It could easily be ACPI, of course. There was some other case where ACPI
> > > > did that, iirc.
> > >
> > > There is a known bug in the USB controllers' suspend that enables interrupts
> > > from within ->suspend_late(). It should be fixed by the next USB merge
> > > AFAICS.
> >
> > the patch from Andrew looks wrong, as it hides the only place in the
> > kernel that was able to report the resume bug. Nevertheless related to
> > that bug we've got a new debug check queued up in timers/urgent:
> >
> > void hres_timers_resume(void)
> > {
> > - /* Retrigger the CPU local events: */
> > + WARN_ONCE(!irqs_disabled(),
> > + KERN_INFO "hres_timers_resume() called with IRQs enabled!");
> > +
> > retrigger_next_event(NULL);
> > }
> >
> > as the buggy 'irqs are enabled' condition was not detected reliably. (it
> > was only detected with certain lockdep options turned on - and even then
> > it did not seem to be 100% triggerable)
>
> Yeah.
>
> > i sent it to Linus earlier today.
>
> OK, thanks.
>
> I'll write a debug patch covering that more generally when I recover from the
> flu a bit.
>
> Rafael

note, we could reuse the ftrace/irqtrace callbacks as well to create an:
"enforce IRQs off and debug violations of that" facility.

It would work like this, you could mark IRQs as disabled 'permanently':

force_irqs_off_start();
...
force_irqs_off_end();

you could mark an arbitrarily complex code sequence that way, and ftrace
would emit a WARN_ONCE() if irqs are enable anytime during that sequence -
by using the irq-tracking facilities we have for the irqsoff tracer (and
which we also have for lockdep).

Would that be useful?

Ingo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/