Re: 2.6.29-rc3: tg3 dead after resume

[Matt Carlson]

On Thu, Jan 29, 2009 at 02:35:44PM -0800, Parag Warudkar wrote:
> 
> 
> On Thu, 29 Jan 2009, Matt Carlson wrote:
> 
> > FWIW, I can suspend and resume using the latest linux-2.6 kernel
> > on a machine with a similar chip here.  The problem doesn't seem to
> > affect all Broadcom devices.
> 
> It is failing for me on HP xw6600 workstation, if that helps in any way.
> 
> Parag

O.K.  Let's test some more assumptions.  Can you apply the following
patch and observe the system logs when the device is first loaded and
again after resume.  The patch looks at the pci command register to
verify that memory space IO is indeed enabled.  (It should be.)  This is
all that should be needed for MMIO to work.

If the PCI_COMMAND message doesn't match, then it means that the
PCI_COMMAND register isn't getting restored for some reason.  If they do
match, then something else in the system is not getting restored
correctly.


diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 8b3f846..67bb29f 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -7225,8 +7225,17 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
  */
 static int tg3_init_hw(struct tg3 *tp, int reset_phy)
 {
+	u16 cmd;
+
 	tg3_switch_clocks(tp);
 
+	pci_read_config_word(tp->pdev, PCI_COMMAND, &cmd);
+
+	printk(KERN_NOTICE "%s: PCI_COMMAND reg = 0x%x (bit 1 is %s)\n",
+	       tp->dev->name, cmd, (cmd & PCI_COMMAND_MEMORY) ? "on" : "off");
+	printk(KERN_NOTICE "%s: Reg value at offset 0x0 is 0x%x\n",
+	       tp->dev->name, tr32(0x0));
+
 	tw32(TG3PCI_MEM_WIN_BASE_ADDR, 0);
 
 	return tg3_reset_hw(tp, reset_phy);

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/