Re: [PATCH] OMAP3 GPIO: Fix getting the value of the GPIO output pin

From: Joonyoung Shim
Date: Mon Feb 09 2009 - 00:29:28 EST


Sorry, I added CC.

2009/2/9 David Brownell <david-b@xxxxxxxxxxx>:
> On Sunday 08 February 2009, Joonyoung Shim wrote:
>> I have knew if gpio pin is configured as an output, the value of the
>> corresponding bit
>> in the GPIO_DATAOUT register is driven on the corresponding gpio pin.
>> But the implemented API only reports the value of the corresponding bit in the
>> GPIO_DATAIN register. This can report a wrong value.
>>
>> For example, even though the gpio 141pin is configured as an output and assigns
>> the gpio's value to 1 through gpio_set_value(), the result of
>> "# cat /sys/kernel/debug/gpio" reports to me as follows.
>>
>> GPIOs 128-159, gpio:
>> gpio-141 (motor enable ) out lo
>>
>> but it should have reported "hi" instead of "lo".
>
> I happen to observe that mach-omap2/mux.c there are a bunch
> of pins that are wrongly multiplexed. Like:
>
> MUX_CFG_34XX("AE6_34XX_GPIO141", 0x16e,
> OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)

I think that it is right because i want to use gpio141 pin as output,

>
> Which should clearly be AE6_34XX_GPIO141_OUT since it does
> not enable the input driver. Try making that ...PIN_OUTPUT
> read ...PIN_INPUT and see if things behave.

Of course, it will be better if the name is clear as AE6_34XX_GPIO141_OUT.
but, the core of this problem is not it, the chip->get() called in
gpiolib_dbg_show()
of drivers/gpio/gpiolib.c or dbg_gpio_show() of arch/arm/plat-omap/gpio.c
can return the wrong value when gpio pin is configured as an output.

the reason as i say at former email, is because __omap_get_gpio_datain()
called by gpio_get() of arch/arm/plat-omap/gpio.c reports only value of
OMAP24XX_GPIO_DATAIN register.

- Joonyoung

>
> - Dave
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/