Re: LS21 + HPET = boot hang (since 2.6.24-rc1)

[John Stultz]

On Fri, 2009-02-06 at 18:36 -0800, john stultz wrote:
> Hey Thomas, 
> 	Just a heads up, Clark noted that on LS21s if the HPET is enabled in
> the BIOS, recent kernels hang at boot.
> 
> I booted the current -git up after enabling HPET and sure enough:
> 
> ENABLING IO-APIC IRQs
> ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> ...trying to set up timer (IRQ0) through the 8259A ...
> ..... (found apic 0 pin 2) ...
> ....... failed.
> ...trying to set up timer as Virtual Wire IRQ...
> ..... failed.
> ...trying to set up timer as ExtINT IRQ...
> ..... failed :(.
> Kernel panic - not syncing: IO-APIC + timer doesn't work!  Boot with
> apic=debug and send a report.  Then try booting with the 'noapic'
> option.
> 
> 
> Full boot log attached. Disabling the HPET in the BIOS boots up fine.
> 
> I then did some rough bisection to see when this showed up and
> apparently it hit sometime between 2.6.23 and 2.6.24-rc1.
> 
> I'll do some further bisection on it next week, but if you have any
> quick ideas let me know. 

Hey Thomas,

So I bisected this down to:
commit b8ce33590687888ebb900d09557b8807c4539022
Author: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Date:   Fri Oct 12 23:04:07 2007 +0200

    x86_64: convert to clock events

    Finally switch to the clockevents code. Share code with i386 for
    hpet and PIT.

    Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
    Signed-off-by: Chris Wright <chrisw@xxxxxxxxxxxx>
    Signed-off-by: Ingo Molnar <mingo@xxxxxxx>
    Signed-off-by: Arjan van de Ven <arjan@xxxxxxxxxxxxxxx>



I'll try to actually look at the change and see what might be the issue
tomorrow. Again, this effects LS21's w/ HPET enabled in the BIOS, but
doesn't seem to effect other HPET systems I tested. Soif you have any
suggestions for getting helpful debug data, let me know.

thanks
-john


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/