[PATCH 2/7] mmc_spi: wait more bytes for card response

[Wolfgang Mües]

From: Wolfgang Muees <wolfgang.mues@xxxxxxxxxxxx>

o some cards are slower than the standard allows and need more
  time to respond to a command. Max. observed number of bytes
  was 12.

Signed-off-by: Wolfgang Muees <wolfgang.mues@xxxxxxxxxxxx>

---
This is one of a line of patches to enhance the usability of
the mmc spi host port driver from "don't work with most SD cards"
to "work with nearly all SD cards" (including those ugly cards
with non-byte-aligned responses).

diff -uprN 2_6_29_rc7_patch1_spi_mode_3/drivers/mmc/host/mmc_spi.c 2_6_29_rc7_patch2_wait_16bytes_response/drivers/mmc/host/mmc_spi.c
--- 2_6_29_rc7_patch1_spi_mode_3/drivers/mmc/host/mmc_spi.c	2009-03-11 12:58:47.000000000 +0100
+++ 2_6_29_rc7_patch2_wait_16bytes_response/drivers/mmc/host/mmc_spi.c	2009-03-11 13:00:06.000000000 +0100
@@ -279,8 +279,11 @@ static int mmc_spi_response_get(struct m
 		 * so it can always DMA directly into the target buffer.
 		 * It'd probably be better to memcpy() the first chunk and
 		 * avoid extra i/o calls...
+		 *
+		 * Note we check for more than 8 bytes, because in practice,
+		 * some SD cards are slow...
 		 */
-		for (i = 2; i < 9; i++) {
+		for (i = 2; i < 16; i++) {
 			value = mmc_spi_readbytes(host, 1);
 			if (value < 0)
 				goto done;

---
regards

i. A. Wolfgang Mües
-- 
Auerswald GmbH & Co. KG
Hardware Development
Telefon: +49 (0)5306 9219 0
Telefax: +49 (0)5306 9219 94 
E-Mail: Wolfgang.Mues@xxxxxxxxxxxx
Web: http://www.auerswald.de
 
--------------------------------------------------------------
Auerswald GmbH & Co. KG, Vor den Grashöfen 1, 38162 Cremlingen
Registriert beim AG Braunschweig HRA 13289
p.h.G Auerswald Geschäftsführungsges. mbH
Registriert beim AG Braunschweig HRB 7463
Geschäftsführer: Dipl-Ing. Gerhard Auerswald
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/