Re: [PATCH] bonding: allow bond in mode balance-alb to workproperly in bridge

From: Stephen Hemminger
Date: Sun Mar 15 2009 - 19:13:51 EST


On Sat, 14 Mar 2009 10:49:11 +0100
Jiri Pirko <jpirko@xxxxxxxxxx> wrote:

> Sat, Mar 14, 2009 at 06:39:32AM CET, shemminger@xxxxxxxxxxxxxxxxxxxx wrote:
> >On Fri, 13 Mar 2009 19:33:04 +0100
> >Jiri Pirko <jpirko@xxxxxxxxxx> wrote:
> >
> >> Hi all.
> >>
> >> This is only a draft of patch to consult. I'm aware that it should be divided
> >> into multiple patches. I want to know opinion from you folks.
> >>
> >> The problem is described in following bugzilla:
> >> https://bugzilla.redhat.com/show_bug.cgi?id=487763
> >>
> >> Basically here's what's going on. In every mode, bonding interface uses the same
> >> mac address for all enslaved devices. Except for mode balance-alb. When you put
> >> this kind of bond device into a bridge it will only add one of mac adresses into
> >> a hash list of mac addresses, say X. This mac address is marked as local. But
> >> this bonding interface also has mac address Y. Now then packet arrives with
> >> destination address Y, this address is not marked as local and the packed looks
> >> like it needs to be forwarded. This packet is then lost which is wrong.
> >>
> >> Notice that interfaces can be added and removed from bond while it is in bridge.
> >> Therefore I introduce another function pointer in struct net_device_ops -
> >> ndo_check_mac_address. This function when it's implemented should check passed
> >> mac address against the one set in device. I'm using this in bonding driver when
> >> the bond is in mode balance-alb to walk thru all slaves and checking if any of
> >> them equals passed address.
> >>
> >> Then in bridge function br_handle_frame_finish() I'm using ndo_check_mac_address
> >> to recognize the destination mac address as local.
> >>
> >> Please look at this and tell me what you think about it.
> >>
> >> Thanks
> >>
> >> Jirka
> >>
> >
> >A better and more general way to do this have the dev_set_mac_address
> >function check the return of the notifier and unwind. Then any protocol
> >can easily prevent address from changing.
>
> Can you please describe this thougth a bit more? I can't understand it now...
>
> Thanks
>
> Jirka

Something like this:

--- a/net/core/dev.c 2009-03-15 15:55:02.098126056 -0700
+++ b/net/core/dev.c 2009-03-15 16:02:43.999251305 -0700
@@ -3830,6 +3830,7 @@ int dev_set_mac_address(struct net_devic
{
const struct net_device_ops *ops = dev->netdev_ops;
int err;
+ char save_addr[MAX_ADDR_LEN];

if (!ops->ndo_set_mac_address)
return -EOPNOTSUPP;
@@ -3837,9 +3838,17 @@ int dev_set_mac_address(struct net_devic
return -EINVAL;
if (!netif_device_present(dev))
return -ENODEV;
+
+ memcpy(save_addr, dev->dev_addr, dev->addr_len);
err = ops->ndo_set_mac_address(dev, sa);
- if (!err)
- call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
+ if (err)
+ return err;
+
+ err = call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
+ if (err) {
+ memcpy(sa->sa_data, save_addr, dev->addr_len);
+ ops->ndo_set_mac_address(dev, sa);
+ }
return err;
}


And something like this:

--- a/drivers/net/bonding/bond_main.c 2009-03-15 16:03:53.909000973 -0700
+++ b/drivers/net/bonding/bond_main.c 2009-03-15 16:11:43.227127031 -0700
@@ -3534,6 +3534,7 @@ static int bond_slave_netdev_event(unsig
{
struct net_device *bond_dev = slave_dev->master;
struct bonding *bond = netdev_priv(bond_dev);
+ int err;

switch (event) {
case NETDEV_UNREGISTER:
@@ -3570,6 +3571,15 @@ static int bond_slave_netdev_event(unsig
* servitude.
*/
break;
+ case NETDEV_CHANGEADDR:
+ if (bond->params.mode == BOND_MODE_ALB)
+ err = bond_alb_check_mac_address(bond);
+ else if (compare_ether_addr(bond_dev->dev_addr, addr) != 0)
+ err = -EINVAL;
+
+ if (err)
+ return notifier_from_errno(err);
+ break;
case NETDEV_CHANGENAME:
/*
* TODO: handle changing the primary's name



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/