Re: tg3 driver fails to load firmware (2.6.29)

[Alan Cox]

On Tue, 24 Mar 2009 13:09:48 +0100
Ralf Hildebrandt <Ralf.Hildebrandt@xxxxxxxxxx> wrote:

> >From the log:
> 
> Mar 24 09:02:42 proxy-cvk-2 kernel: [   39.078323] tg3 0000:02:02.0: PME# disabled
> Mar 24 09:02:42 proxy-cvk-2 kernel: [   40.600196] tg3 0000:02:02.1: firmware: requesting tigon/tg3_tso.bin
> Mar 24 09:02:42 proxy-cvk-2 kernel: [   41.723404] tg3: eth0: Link is up at 1000 Mbps, full duplex.
> Mar 24 09:02:42 proxy-cvk-2 kernel: [   41.723458] tg3: eth0: Flow control is on for TX and on for RX.
> Mar 24 09:02:42 proxy-cvk-2 kernel: [  100.599130] eth1: Failed to load firmware "tigon/tg3_tso.bin"
> Mar 24 09:02:42 proxy-cvk-2 kernel: [  100.599184] eth1: TSO capability disabled.
> Mar 24 09:02:42 proxy-cvk-2 kernel: [  100.599241] tg3 0000:02:02.1: PME# disabled
> 
> but:
> 
> # ll /lib/firmware/2.6.29/tigon/tg3_tso.bin
> -rw-r--r-- 1 root root 7004 Mar 24 09:24 /lib/firmware/2.6.29/tigon/tg3_tso.bin

Is your userspace configured to use /lib/firmware/2.6.29 or the more
usual /lib/firmware/ ?
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/