Re: tg3 driver fails to load firmware (2.6.29)

[Ralf Hildebrandt]

* Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>:
> On Tue, 24 Mar 2009 13:09:48 +0100
> Ralf Hildebrandt <Ralf.Hildebrandt@xxxxxxxxxx> wrote:
> 
> > >From the log:
> > 
> > Mar 24 09:02:42 proxy-cvk-2 kernel: [   39.078323] tg3 0000:02:02.0: PME# disabled
> > Mar 24 09:02:42 proxy-cvk-2 kernel: [   40.600196] tg3 0000:02:02.1: firmware: requesting tigon/tg3_tso.bin
> > Mar 24 09:02:42 proxy-cvk-2 kernel: [   41.723404] tg3: eth0: Link is up at 1000 Mbps, full duplex.
> > Mar 24 09:02:42 proxy-cvk-2 kernel: [   41.723458] tg3: eth0: Flow control is on for TX and on for RX.
> > Mar 24 09:02:42 proxy-cvk-2 kernel: [  100.599130] eth1: Failed to load firmware "tigon/tg3_tso.bin"
> > Mar 24 09:02:42 proxy-cvk-2 kernel: [  100.599184] eth1: TSO capability disabled.
> > Mar 24 09:02:42 proxy-cvk-2 kernel: [  100.599241] tg3 0000:02:02.1: PME# disabled
> > 
> > but:
> > 
> > # ll /lib/firmware/2.6.29/tigon/tg3_tso.bin
> > -rw-r--r-- 1 root root 7004 Mar 24 09:24 /lib/firmware/2.6.29/tigon/tg3_tso.bin
> 
> Is your userspace configured to use /lib/firmware/2.6.29 or the more
> usual /lib/firmware/ ?

Which leads to the next question: How to I find out?

-- 
Ralf Hildebrandt
  GeschÃftsbereich IT | Abteilung Netzwerk
  Charità - UniversitÃtsmedizin Berlin
  Campus Benjamin Franklin
  Hindenburgdamm 30 | D-12200 Berlin
  Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962
  Ralf.Hildebrandt@xxxxxxxxxx | http://www.charite.de
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/